LSI 9260-8i SAS RAID Card Firmware

LSI 9260-8i SAS RAID Card Firmware

Fixes & Enhancements

1.Native configuration is no longer supported message in post
2.FW quiesces IO when LC starts on BBU even in "WB always" mode
3.Patrol Reads on SSD drives
4.Implemented the limited band charging
5.Megamon during Injecting errors to VD with 512e PDs on iMR controller
6.Native configuration is no longer supported message in post
7.CRC errors during TSOC communication
8.Update BBU eeprom offset 0x08 and 0x09
9.iMR FW : Fail to read the header info from CFI Flash ROM during repeated system reboot.
10.Disable logging in flash for specific OEM


Version 12.12.0-0111, A01



Release date

23 Jan 2013

Last Updated

23 Jan 2013


Available formats

File Format:Plain-Text
File Name:EndUser LicenseAgreementType S_Rev. 040512.txt
Download Type:HTTP
File Size: 11 KB
Format Description:This file format contains plain text which can be viewed with a standard text editor.
To ensure the integrity of your download, please verify the checksum value.
File Format:Floppy
File Name:MERGED_12.12.0-0111_SAS_2108_FW_Image_2.130.353-1663.exe
Download Type:HTTP
File Size: 26 MB
Format Description:This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.

By downloading, you accept the terms of the Dell Software License Agreement.

Applies to
MegaRAID SAS 9260-8i
Installation instructions
Installation Instructions:
Please refer to the MegaRAID SAS Device Driver Installation Guide. If installing from a Driver Update Disk (DUD),
please select the appropriate .img from this zip file.

Reboot will be required
Warning: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).