Driver Details

LSI LOGIC,CRD,INTFC,M-R,B0,F-H,9265,LSI,23.1.1.0004,A00

This Firmware is for LSI MegaRAID SAS 9265-8i in PowerEdge C6100, C6105, C6145, C6200 & C6220.

Fixes & Enhancements

Firmware Enhancements:
LSIP200184337 (CO) (auto4comp FW_SAS_LSI) TB WebBIOS : Do not let WebBIOS to display "Chip Temperature (Celsius)".
LSIP200184339 (CO) (auto4comp FW_SAS_LSI) TB FW Re-activate the user option to enable Patrol Read on SSD.
LSIP200148755 (CO) (auto4comp FW_SAS_LSI) Port to TB - STANDBY IMMEDIATE command to SATA disks during shutdown from OS
LSIP200149074 (CO) (auto4comp FW_SAS_LSI) TB FW : Change SES Green/Amber LED behavior for particular OEM JBOD enclosure.
LSIP200148763 (CO) (auto4comp FW_SAS_LSI) TB FW: Do not let WebBIOS to display "BBU Retention Time" and "Estimated Time To Recharge".
LSIP200148997 (CO) (auto4comp FW_SAS_LSI) Need to correctly identify I2C errors with iBBU08 and beyond
LSIP200149017 (CO) (auto4comp FW_SAS_LSI) TB Firmware : Alcor-N Global HDD Fault LED doesn't light up/blink in PD Offline/Missing/Rebuildi
LSIP200148663 (CO) (auto4comp FW_SAS_LSI) MR fw should Enable puncturing for SATA drives
LSIP200085360 (CO) iMR TB changes
LSIP200146793 (CO) (LSIP200137246) tools to address latency
LSIP200122803 (CO) 2208 to support NVCache, update FPGA SPI Flash, and support small cell battery
LSIP200148499 (CO) FW to wait for 500us after DRAM_Available assertion
LSIP200148500 (CO) FW to take action based on temperature reading from the BMU
LSIP200149054 (CO) CR to include Megascu read of BMU version
LSIP200136551 (CO) (LSIP200096395) 2208 Firmware needs to release PCIe Retry
LSIP200144888 (CO) (auto4comp FW_SAS_LSI) Thunderbolt DSW-3 for initial release
LSIP200173689 (CO) (LSIP200165396) Tbolt C0/D0 chip recognition
LSIP200147510 (CO) (LSIP200165396) Tbolt C0/D0 chip recognition
LSIP200104569 (CO) (auto4comp FW_SAS_LSI) Mark VD consistent after CC with uncorrectable medium error
LSIP200170591 (CO) (LSIP200156073) Add support for Thunderbolt C0/D0
LSIP200173285 (CO) (LSIP200156073) Add support for Thunderbolt C0/D0
LSIP200148752 (CO) (auto4comp FW_SAS_LSI) add PCI-E information in fw log
LSIP200174086 (CO) (LSIP200156073) Add support for Thunderbolt C0/D0
LSIP200173293 (CO) (auto4comp FW_SAS_LSI) FW to take PCI IDs & SAS Address out of SBR or TSOC (OEM selectable per value)
LSIP200099802 (CO) (auto4comp FW_SAS_LSI) user accessible bad block table
LSIP200099806 (CO) (auto4comp FW_SAS_LSI) PD status commands under CLI
LSIP200099809 (CO) (auto4comp FW_SAS_LSI) additional MR diags
LSIP200099888 (CO) (auto4comp FW_SAS_LSI) Suspend function, resume function.
LSIP200099898 (CO) (auto4comp FW_SAS_LSI) Suspend / resume background tasks
LSIP200099907 (CO) (auto4comp FW_SAS_LSI) SSD Cache properties improvements
LSIP200099915 (CO) (auto4comp FW_SAS_LSI) Rebuild Write Cache
LSIP200051086 (CO) (LSIP200013286) MR to support Thunderbolt Dual Core
LSIP200075829 (CO) MR to support Thunderbolt Dual Core
LSIP200135222 (CO) (auto4comp FW_SAS_LSI) SW licensing. Support FoD for PF activations on MegaRAID
LSIP200144979 (CO) MR to support Thunderbolt Dual Core 11M02
LSIP200154733 (CO) (auto4comp FW_SAS_LSI) Add new Event to notify "Patrol Read Aborted" in MegaRAID FW.
LSIP200140142 (CO) (auto4comp FW_SAS_LSI) additional MR diags
LSIP200099825 (CO) (auto4comp FW_SAS_LSI) erase vd function
LSIP200099835 (CO) (auto4comp FW_SAS_LSI) PD secure erase
LSIP200099919 (CO) (auto4comp FW_SAS_LSI) Automatic rebuild on "cold" drive replacement
LSIP200099846 (CO) (auto4comp FW_SAS_LSI) Request to use Unconfigured Good Drives for a HotSpare if no spare defined.
LSIP200099857 (CO) (auto4comp FW_SAS_LSI) Emergency spare may ignore mixing policies
LSIP200099868 (CO) (auto4comp FW_SAS_LSI) EHSP - Emergency Hot Spare
LSIP200099921 (CO) (auto4comp FW_SAS_LSI) EHSP support for cold drive addition
LSIP200099878 (CO) (auto4comp FW_SAS_LSI) DGs revertible HSP attributes sticky on adoption.
LSIP200099764 (CO) (auto4comp FW_SAS_LSI) PD diag state - Shield State
LSIP200099770 (CO) (auto4comp FW_SAS_LSI) Shield state properties
LSIP200099773 (CO) (auto4c

Version

Version 23.1.1.0004, A00

Release date

03 Sep 2012

Last Updated

20 Nov 2012

Importance

Recommended

Available formats

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

Not Applicable

Applies to

ASSY, CBL, INTFC, LSI9265, BBU09
BRKT, BBU09, METAL, LSI9265
BRKT, LSI, 9265, BBU, C6145
LSI 9265-8i MegaRaid SAS

Installation instructions

Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download
section of www.lsi.com.

Command syntax: MegaCli -adpfwflash -f MR_TB_8MB.rom -a0

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).