Get to know Windows 2012

Explore new features and learn how to get the most out of your Windows System

Learn more

Driver Details

PowerConnect,M8024-k,v5.0.0.4,A08

This firmware is for the M8024-K version of PowerConnect switch and has new features and bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.

Version

Other versions
v4.2.2.3,A07 11 May 20127:46:30 PM
4.2.1.3,A06 10 Feb 20128:17:42 PM
4.2.0.4,A05 16 Jan 20125:50:12 PM

Compatibility

Operating Systems
  • Not Applicable

Applies to

PowerConnect M8024-K;

Date

Release date
29 Aug 2012
Last Updated
19 Jun 2013

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Hard-Drive
File Name:PCM8024kv5.0.0.4a08.zip
Download Type:HTTP
File Size: 13MB
Format DescriptionThis file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
82d872fa083700ac8b8b2926e4035c8b
SHA1:
f49187d2d940705d64d4cdf6c43b01be34b177c8
SHA-256:
0339219fe1fde9805ab19f787af51fa4a0361666bc9e5c80b6588604ffad4462

By downloading, you accept the terms of the Dell Software License Agreement.


Important Information

Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"

Fixes & Enhancements

Fixes and Enhancement:

Fixes
- OpenManage UI does not accept blank space character for port description.
- "show spanning-tree detail" counters are non-zero for inactive interfaces.
- Unable to remove 0.0.0.0 as default gateway on OOB interface using the web.
- When connecting via SSH, the user is not prompted to acknowledge the MOTD
- "encapsulation" command is unavailable in interface range mode
- M8024-k OpenManage Web UI stack view display
- "spanning-tree transmit hold-count" command's value is not reflected in show command
- Inconsistent behavior in single and range interface mode of "spanning-tree port
- CLI command "no passwords strength exclude-keyword" requires
- Inline help for "spanning-tree loopguard" is incorrect.
- Some of the options of "show ip pim" command are not available in user EXEC mode.
- Configuration command "logging " accepts more than 63 characters.
- dot1dTpPortMaxInfo is displaying maximum frame size that includes MAC header.
- If a user attempts to create a certificate request with information that is not identical to the key generated, the user is not given an error/ informative response letting them know there is a conflict between their key and their request.
- OIDagentInventorySupportedUnitExpected CodeVer provides incorrect display string 1.0.176.0
- 1. Changes are not applied to the correct interfaces on the pages "System->sFlow->Sampler Configuration" "System->sFlow->Poll Configuration" 2. Incorrect error message is displayed when not configured Receiver index is applied to interface on "System->sFlow->Poll Configuration" page.
- "show ip route configured ...longer-prefixes" reports that default gateway is not configured, which is incorrect.
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- "ipv6 pim join-prune interval" command does not work
- Macro input string does not accept more than 20 characters
- startup-config failed error message is displayed when finishing the Dell Easy Setup Wizard
- In stacking environment, "show system temperature" command output is corrupted
- Error message for port enable / disable on IE on 8024F combo ports
- Alignment issues in the output of "show voice vlan interface" command
- CLI command "show ip igmp snooping" output is truncated.
- vrrp ip command accepts invalid IP addresses
- CLI command "isdp enable" does not work for a range of ports
- "show interface Priority-Flow-Control" command output is not formatted correctly
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- Port channel goes down during master failover.
- switches rebooting - possible crash dump w/ emWeb
- general mode vlan does not show up after a reload, it shows up in access vlan
- SNMP OIDs 1.3.6.1.4.1.674.10895.3000.1.2.110.7.x causing switch crash
- Stack ARP Problem
- Stack member units port display is missing in web GUI.
- No response to ICMP with jumbo (ping)
- Ports connected to Intel X520 NIC do not return online after reboot.
- switch reboots randomly.

Enhancements
- 802.1Qaz (ETS) on 8100 series
- Added Native EEE Support for the PC8100 10GBaseT Ports
- Support for 40 Gig (QSFP+) interfaces
- Support for Bootcode upgrade from pre-4.x image to 5.x image without manual system reset.
- Local Preference for LAG
- Full Private VLAN
- CLI output filtering
- Routing Improvements for OSPF
- UDLD
- Administrative Profiles
- AAA Authorization
- TACACS+ Accounting
- Stacking over QSFP+ ports
- QSFP+ diagnostics
- sFlow Support on Port Channels

Installation instructions

Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more