Driver Details

Dell PERC H700 Integrated, PERC H700 Adapter, PERC H800 Adapter, PERC H700 Modular Device Driver

This package provides the driver for Dell PERC H700 Integrated, PERC H700 Adapter, PERC H800 Adapter, PERC H700 Modular devices and is supported on the PowerEdge family of products running RHEL5.5 and SLES10 SP3. For RHEL 6 and SLES11 SP1, use the native "in-box" driver.

Note: Newer releases of the above operating system(s) should use the native "in-box" driver version

Version

  • Version 00.00.04.31.2-1, A12

Applies to

�;

Date

Release date
04 Feb 2013
Last Updated
14 May 2013

Importance

Recommended. Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Available formats

File Format:Tar-Files
File Name:R282636-megaraid_sas-00.00.04.31.2-1.tar.gz
Download Type:HTTP
File Size: 1MB
Format DescriptionThis file is an archive of compressed files for software installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
67b9cac84ad1a2a09ff85097cd2e15c8
SHA1:
Not available
SHA-256:
Not available
File Format:Rel-Notes-Text
File Name:R282636-megaraid_sas-00.00.04.31.2-1.txt
Download Type:HTTP
File Size: 2KB
Format DescriptionThis file format contains plain text which can be viewed with a standard text editor.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
ef746f55ced251043e9a78ddc028e0bb
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.


Fixes & Enhancements

Fixes
- Resolved an issue where no VD rescan was occurring when PD states change from online to offline and back to online.
- Resolved an issue where firmware may hang when rebooting after performing a reconstruction operation.

Enhancements
- Added support for IEEE scatter gather lists for improved performance.

Installation instructions

Installation Instructions

Driver Package
The driver package is a compressed tar file.
1) To extract the components within the tar file, un-tar the files:
tar -xvzf R282636-megaraid_sas-00.00.04.31.2-1.tar.gz
2) Extracted files should contain the following:
dkms rpm dkms-2.0.22.0-1.noarch.rpm
driver rpm megaraid_sas-v00.00.04.31.2-1.noarch.rpm
source code megaraid_sas-v00.00.04.31.2-src.tgz

Adding or Updating the Driver on a System.
1) Install the DKMS rpm package if needed. Use this command:
2) rpm -ivh dkms-2.0.22.0-1.noarch.rpm NOTE: Use rpm -Uvh dkms-2.0.22.0-1.noarch.rpm when updating an existing package.
3) Install the Driver package. Use this command
4) rpm -Uvh megaraid_sas-v00.00.04.31.2-1.noarch.rpm
5) Verify the driver has been loaded with this system command:
modinfo megaraid_sas
and this dkms command:
dkms status

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more