Driver Details

Dell Patches And Fixes (Portable), v. 1.13, A01

Firmware update for the LG DVD-ROM drive only!

Fixes & Enhancements

The firmware revision 1.13
corrects a software hang at the "Scanning tracks" screen with Adaptec EZ-CD
Creator which is encountered when Copying a CD-Extra, CD-Plus, or Enhanced CD
media (or any CD media with Audio and Data content).

Version

Version 1.13, A01

Release date

07 Jun 2001

Last Updated

03 Nov 2011

Importance

Optional

Available formats

File Format:Floppy
File Name:DLGDVD01.exe
Download Type:HTTP
File Size: 388KB
Format DescriptionThis file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

Microsoft MS-DOS

Applies to

Patches And Fixes (Portable)

Installation instructions

To uprade the firmware on your LG DVD-ROM to version 1.13 drive perform the
following steps.

NOTE: To perform this upgrade you will need to have your DVD-ROM and floppy
disk drive connected to your computer. For instructions on how to attach your
floppy drive externally, see your system documentation.

Make sure that your computer is plugged in to AC power before attempting this
upgrade!

Step 1) After you have downloaded the firmware update, locate and
double click on the DLGDVD01.exe file.

Step 2) Insert a blank formatted floppy diskette into drive A: and
click "Setup".

Step 3) After clicking "Setup," follow the onscreen prompts and the files will be
automatically extracted to drive A:.

Step 4) After extracting the files, restart your computer with the floppy
diskette in the drive. If your system does not boot from the
LG DVD-ROM firmware upgrade diskette, see your system documentation
regarding changing the "Boot Sequence" in your system bios.

Step 5) The firmware upgrade process will begin automatically. During the
firmware upgrade process you will see a progress bar with the firmware
update status. Once it has completed, you will see a message with the
updated drive information. If you recieve a message stating "Current
drive is not supported..", your drive is not an LG DVD-ROM or is not
the correct model of LG DVD-ROM drive and this upgrade is not
applicable to your drive. Do not unplug or turn off your machine
while the upgrade is being performed!

Step 6) After the firmware upgrade process is complete, remove the floppy
diskette from the drive and restart the computer.

After restarting, the operating system may re-detect the drive and prompt another restart.

To confirm that the firmware upgrade was completed properly, perform the following steps.

Step 1) To view the firmware revision of the DVD-ROM drive you will need to
look in Windows Device Manager.

Step 2) In Windows 98SE, or Windows Millenium Edition you can access the
Device Manager by first right clicking on your "My Computer" icon.
Next, click on the "Device Manager" tab. Next, click on the "+" next
to "CDROM". Once you have clicked on the "+" next to "CDROM" double
click on "LG DVD-ROM". Next, click on the settings tab. The
"Firmware revision:" in the upper right hand corner should now be
"1.13". If the revision number still shows 1.11 or earlier, run
through the firmware upgrade steps again.

In Windows 2000, it will be necessary to locate the new firmware version in the LG
status window during the flash process, as Windows 2000 lacks a means to report the
firmware version.

Important Information

IMPORTANT! This file is for upgrading the firmware on the LG DVD-ROM drive
only! This file will not work on any other Dell CD-ROM, CD/RW, or DVD-ROM
drives and should not be used if you do not have an LG 8X DVD-ROM drive.
My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.