Get to know Windows 2012

Explore new features and learn how to get the most out of your Windows System

Learn more

Driver Details

Dell OpenManage Server Agent Updates, v. 4.2u1, A00

Dell OpenManage Server Agent 4.2 Update 1 is supported on the Red Hat Linux 7.0 operating system.

Fixes & Enhancements

This update addresses the following issues for the Dell PowerEdge 350:

* Changes thresholds for the -12 volt (V) voltage probe on the system board. These new thresholds prevent erroneous probe failures and warnings.

* Corrects erroneous fan failure reports in the event log.

* Corrects system crashes at startup caused by incorrect event log record length.

* Disables the chassis identification feature.

This update addresses the following issues for the PowerVault(TM) 2xxS SCSI disk system:

* Allows Dell PowerEdge systems attached to the
Dell PowerVault 2xxS SCSI disk system to respond to simple network management protocol (SNMP) requests for information. Under certain rare circumstances, some Dell systems with PowerVault 2xxS attached were not responding to SNMP requests.

Version

Version 4.2u1, A00

Release date

03 May 2001

Last Updated

03 Nov 2011

Importance

Optional

Available formats

File Format:Hard-Drive
File Name:OMSA42U1.zip
Download Type:HTTP
File Size: 57KB
Format DescriptionThis file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Added to download list
Go to [{0}]
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Supported Operating Systems

Red Hat Linux 7.0

Applies to

OpenManage Server Agent Updates

Installation instructions

NOTE: This update installs using a shell script (omsa42u1.sh).
If the Dell OpenManage Server Agent is running on your system when you run the update shell script, the script stops the Dell OpenManage Server agent. After the script completes the update, it
restarts the Dell OpenManage Server Agent if the agent was running before you executed the update script.

To prepare for installing this update:

1. Download the zip file "OMSA42U1".

2. Unzip the files using the Linux "unzip" utility.

3. After the files have been unpacked, you may delete the zip file downloaded in step 1.

To install the "OMSA42U1" update:

1. Log in as root.

2. Change to the directory that contains the update.

3. To run the update, type:

./omsa42u1.sh

The update installation script displays a message stating whether the update installed successfully.

Important Information

You must install this update if you are running Dell OpenManage 4.2 on a Dell PowerEdge 350 system, or if you have a PowerVault 2xxS small computer interface (SCSI) disk system connected to your managed node server. You should already have Dell OpenManage Server Agent 4.2 installed prior to applying this update.

My Download List-#1 (0 )

Drivers help and tutorials

My download lists

My download lists enables you to create and save lists of drivers to install at a later time. Lists can only be saved by logging into your existing account or creating a new one, and selecting “Save this list.”
Learn more
This driver has been tested by both the independent software vendor (ISV) and Dell on the operating systems, graphics cards, and application supported by your device to ensure maximum compatibility and performance. Details
Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.