Dell PowerVault 35F, D9908E

INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
PowerVault 35F firmware version d9908e.
Recomendado

Encuentre la mejor descarga para su sistema

Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema

Buscar soporte

Ingrese su modelo o etiqueta de servicio de Dell

¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo

Este controlador no es compatible

Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.

Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.

Versión

d9908e, D9908E

Fecha de publicación

06 feb. 2001

Tipo de descarga

Firmware

Categoría

Fibre Channel

Importancia

Opcionales
Dell Technologies recomienda revisar esta actualización para determinar si corresponde a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formatos disponibles

Formato de archivo: Una o varias imágenes de disco de autoextracción dentro de un .zip de autoextracción
File Name: D9908E.exe
Tamaño del archivo: 553 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
af7f581a2ef46319201864a1164038a7
SHA1:
No disponible
SHA-256:
No disponible

Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)

Detalles adicionales

Mostrar todo | Esconder todo
PowerVault 35F Firmware Download Instructions

The PowerVault 35F can either use FTP, TFTP or a serial connection
(using the XMODEM protocol) to update the firmware. In order to
update the firmware via the serial connection, the PowerVault 35F
must be connected to a terminal emulation program supporting
XMODEM transfers. This menu item does not appear when accessing
the configuration menus through Telnet.

To download firmware using FTP:

1. Connect your computer to the PowerVault 35F’ s Ethernet port.

2. Start your FTP program using the PowerVault 35F’ s IP address:

ftp

Note: The default IP address is 1.1.1.1. See the Change IP
Address section of this chapter for information on changing
the PowerVault 35F IP address.

3. Use root as the user name and password as the password.
To change the user name and password, see the Change Security
Settings section of this chapter.

4. Specify binary mode:

bin

5. Specify the firmware’s path and filename with the put command:
put

The file will transfer and the PowerVault 35F will reboot. The
PowerVault 35F is now using the new firmware.

NOTE: You may want to confirm the new firmware level by
checking the PowerVault 35F’s reboot messages through the
serial interface.

To download firmware using TFTP:

1. Connect your computer using the PowerVault 35F’s
Ethernet port.

2. At the command line, type the following command:

tftp -i put

The file will tranfer and the PowerVault 35F will
reboot. The PowerVault 35F is now using the new
firmware.

NOTE: You may want to confirm the new firmware level by
checking the PowerVault 35F’ s reboot messages through
the serial interface.

To download firmware using a terminal emulator:

NOTE: For quicker downloading, configure the PowerVault 35F
and the terminal emulator utility session connected to it
(such as Hyperterminal) to run at 115200.

1. Establish a Serial Connection to the PowerVault 35F.

2. From the Advanced Options menu, select the Download a
new revision of the Firmware command to start the download
procedure.

3. When you confirm you want to download, the PowerVault 35F
will start the download process.

4. Use the Transfer® Send File option in the terminal emulator
utility.

5. Select the location of the firmware. Use the Browse button,
if you need help finding it.

6. Make sure you select XMODEM as the protocol.

7. Press the Send button.

8. The firmware will begin to download.

When the download is complete, the system verifies that the
firmware image was successfully written to the FLASH memory and
then reboots the PowerVault 35F. Upon reboot, the PowerVault 35F
detects that there is a newly downloaded firmware image and
copies that image to the boot sector of the FLASH and then boots
with that image. At that point the PowerVault 35F is using the
new firmware image.

Ayuda y tutoriales para controladores