Dell Patches And Fixes (Portable), v. 1.13, A01
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.Firmware update for the LG DVD-ROM drive only!
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
The firmware revision 1.13
corrects a software hang at the "Scanning tracks" screen with Adaptec EZ-CD
Creator which is encountered when Copying a CD-Extra, CD-Plus, or Enhanced CD
media (or any CD media with Audio and Data content).
Read Morecorrects a software hang at the "Scanning tracks" screen with Adaptec EZ-CD
Creator which is encountered when Copying a CD-Extra, CD-Plus, or Enhanced CD
media (or any CD media with Audio and Data content).
Version
1.13, A01
Release date
07 Jun 2001
Download Type
Firmware
Category
Patches And Fixes
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats
File Format: One or more self extracting disk images inside of a self extracting zip
File Name: DLGDVD01.exe
File Size: 388.5 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Microsoft MS-DOS
Installation instructions
To uprade the firmware on your LG DVD-ROM to version 1.13 drive perform the
following steps.
NOTE: To perform this upgrade you will need to have your DVD-ROM and floppy
disk drive connected to your computer. For instructions on how to attach your
floppy drive externally, see your system documentation.
Make sure that your computer is plugged in to AC power before attempting this
upgrade!
Step 1) After you have downloaded the firmware update, locate and
double click on the DLGDVD01.exe file.
Step 2) Insert a blank formatted floppy diskette into drive A: and
click "Setup".
Step 3) After clicking "Setup," follow the onscreen prompts and the files will be
automatically extracted to drive A:.
Step 4) After extracting the files, restart your computer with the floppy
diskette in the drive. If your system does not boot from the
LG DVD-ROM firmware upgrade diskette, see your system documentation
regarding changing the "Boot Sequence" in your system bios.
Step 5) The firmware upgrade process will begin automatically. During the
firmware upgrade process you will see a progress bar with the firmware
update status. Once it has completed, you will see a message with the
updated drive information. If you recieve a message stating "Current
drive is not supported..", your drive is not an LG DVD-ROM or is not
the correct model of LG DVD-ROM drive and this upgrade is not
applicable to your drive. Do not unplug or turn off your machine
while the upgrade is being performed!
Step 6) After the firmware upgrade process is complete, remove the floppy
diskette from the drive and restart the computer.
After restarting, the operating system may re-detect the drive and prompt another restart.
To confirm that the firmware upgrade was completed properly, perform the following steps.
Step 1) To view the firmware revision of the DVD-ROM drive you will need to
look in Windows Device Manager.
Step 2) In Windows 98SE, or Windows Millenium Edition you can access the
Device Manager by first right clicking on your "My Computer" icon.
Next, click on the "Device Manager" tab. Next, click on the "+" next
to "CDROM". Once you have clicked on the "+" next to "CDROM" double
click on "LG DVD-ROM". Next, click on the settings tab. The
"Firmware revision:" in the upper right hand corner should now be
"1.13". If the revision number still shows 1.11 or earlier, run
through the firmware upgrade steps again.
In Windows 2000, it will be necessary to locate the new firmware version in the LG
status window during the flash process, as Windows 2000 lacks a means to report the
firmware version.
following steps.
NOTE: To perform this upgrade you will need to have your DVD-ROM and floppy
disk drive connected to your computer. For instructions on how to attach your
floppy drive externally, see your system documentation.
Make sure that your computer is plugged in to AC power before attempting this
upgrade!
Step 1) After you have downloaded the firmware update, locate and
double click on the DLGDVD01.exe file.
Step 2) Insert a blank formatted floppy diskette into drive A: and
click "Setup".
Step 3) After clicking "Setup," follow the onscreen prompts and the files will be
automatically extracted to drive A:.
Step 4) After extracting the files, restart your computer with the floppy
diskette in the drive. If your system does not boot from the
LG DVD-ROM firmware upgrade diskette, see your system documentation
regarding changing the "Boot Sequence" in your system bios.
Step 5) The firmware upgrade process will begin automatically. During the
firmware upgrade process you will see a progress bar with the firmware
update status. Once it has completed, you will see a message with the
updated drive information. If you recieve a message stating "Current
drive is not supported..", your drive is not an LG DVD-ROM or is not
the correct model of LG DVD-ROM drive and this upgrade is not
applicable to your drive. Do not unplug or turn off your machine
while the upgrade is being performed!
Step 6) After the firmware upgrade process is complete, remove the floppy
diskette from the drive and restart the computer.
After restarting, the operating system may re-detect the drive and prompt another restart.
To confirm that the firmware upgrade was completed properly, perform the following steps.
Step 1) To view the firmware revision of the DVD-ROM drive you will need to
look in Windows Device Manager.
Step 2) In Windows 98SE, or Windows Millenium Edition you can access the
Device Manager by first right clicking on your "My Computer" icon.
Next, click on the "Device Manager" tab. Next, click on the "+" next
to "CDROM". Once you have clicked on the "+" next to "CDROM" double
click on "LG DVD-ROM". Next, click on the settings tab. The
"Firmware revision:" in the upper right hand corner should now be
"1.13". If the revision number still shows 1.11 or earlier, run
through the firmware upgrade steps again.
In Windows 2000, it will be necessary to locate the new firmware version in the LG
status window during the flash process, as Windows 2000 lacks a means to report the
firmware version.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.