請勿在更新 BIOS 時將電腦關機或拔除電源，電腦可能因此受損。更新期間，電腦將重新啟動，並且會暫時顯示黑色畫面。
更新前，請閱讀以下所述的安裝說明與重要資訊。
Dell Server DSS7500 BIOS Version 2.8.0
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This release contains new Intel Xeon Processor Scalable Family Processor Microcode to address CVE-2018-3639. CVE-2018-3640. This release contains BIOS firmware version 2.8.0 for Dell DSS 7500.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
- For memory sizes less than 1 TB, updated the MTRR algorithm to the same behavior as 2.4.3 and earlier BIOS versions.
- Network Stack IPv4 is enhanced by using RFC3021 to support the 31-bit subnet mask for point-to-point link.
New and enhanced features
- Enhancement to address security vulnerability CVE-2018-3639 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3639).
- Enhancement to address security vulnerability CVE-2018-3640 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3640).
- Updated the Intel Xeon Processor E5-2600 v4 Product Family Processor Microcode to version 0x0b00002E.
- Updated the Xeon Processor E5-2600 v3 Product Family Processor Microcode to version 0x3D.
- Added setup option QPI Link L1 Power Management. Default is set to Enabled.
- Added proper identification for maximum DIMM speed of 2666 MHz.
閱讀更多- For memory sizes less than 1 TB, updated the MTRR algorithm to the same behavior as 2.4.3 and earlier BIOS versions.
- Network Stack IPv4 is enhanced by using RFC3021 to support the 31-bit subnet mask for point-to-point link.
New and enhanced features
- Enhancement to address security vulnerability CVE-2018-3639 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3639).
- Enhancement to address security vulnerability CVE-2018-3640 (https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-3640).
- Updated the Intel Xeon Processor E5-2600 v4 Product Family Processor Microcode to version 0x0b00002E.
- Updated the Xeon Processor E5-2600 v3 Product Family Processor Microcode to version 0x3D.
- Added setup option QPI Link L1 Power Management. Default is set to Enabled.
- Added proper identification for maximum DIMM speed of 2666 MHz.
繁體中文版
2.8.0, 2.8.0
發佈日期
25 6月 2018
下載類型
系統 BIOS
類別
BIOS
重要性
緊急Dell Technologies 強烈建議儘快套用此重要更新。此更新包含的重大錯誤修正和變更，可改善 Dell 系統功能、可靠性及穩定性。其也可能包含安全性修正和其他增強功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (64 位元) 的更新套件。
檔案名稱： BIOS_JKT0V_WN64_2.8.0.EXE
檔案大小： 17.73 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
如果 Dell 更新套件為原生 Microsoft Windows 64 位元格式，則不需要在 Microsoft Windows Server 安裝 Microsoft WOW64。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
566ad3186689dafad70636223dc3f6a4
SHA1：
58ff9a9c694a40e8256db323e9f959368f8fc6f3
SHA-256：
7210ae98e05c18d037a5fcb35278b6d3dcb6e3e800d644f451286e0249b5a62a
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： BIOS_JKT0V_LN_2.8.0.BIN.sign
檔案大小： 226 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
845c544fb7c1df919bb037eced7f1ff9
SHA1：
133dc43c1927f56eacde943980846c81facae8a1
SHA-256：
93b458e5114b75ad7aab95c45af6d5de3c2d34e544b2832c9da9e43ef3b9495f
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： BIOS_JKT0V_WN32_2.8.0.EXE
檔案大小： 12.84 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
d01cb987fd0648a3220a64b9d297aa26
SHA1：
3516f57693df813876d7aaf1856ab504d1c54f75
SHA-256：
a037af5e0087e271ff416dfcc02f874c8486e300805231bd90032cf5a9383cca
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： BIOS_JKT0V_LN_2.8.0.BIN
檔案大小： 14.33 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
41bc4933d224dcd9cfd8628540a24eff
SHA1：
e5c2aaf911fd2118f0c97f0e55fb664f58e5b720
SHA-256：
3f2f18850a46cae20d1acec57f8dc1ffb4fb2bfd6be8355d0eca4dd3759cd1c2
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.
適用於
DELL Product DSS7500 BIOS
SWB,KENWORTH,BIOS,BW,Q1FY19
安裝指示
Dell Update Package Instructions for DRMK
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
-------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
-------------------------------------------------------------------------------
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign