Article Number: 000122283
Denne artikel viser, hvordan man konfigurerer en administrations-IP-adresse på Dell Networking Force10-switche.
Switchene har som standard ikke konfigureret en IP-adresse. For at kunne administrere switchen skal du først oprette forbindelse til konsolporten på switchen.
9600 baudhastighed
Ingen paritet
8 databits
1 stopbit
Ingen flowstyring
Konfigurer IP-adressen for administrationsporten
Kommando |
Formål |
FTOS# configure |
Gå til konfigurationstilstand. |
FTOS(conf)# interface management 0/0 |
Indtast grænsefladen til administrationsporten. |
FTOS(conf-if-ma-0/0)# ip address 192.168.0.1 255.255.255.0 |
Tildel IP-adressen til grænsefladen. Administrations-IP-undernettet må ikke overlappe andre grænseflade-IP-undernetintervaller. |
FTOS(conf-if-ma-0/0)# no shutdown |
Aktiver brugergrænsefladen. |
FTOS(conf-if-ma-0/0)# exit |
Afslut grænsefladen. |
FTOS(conf)# management route 0.0.0.0 /0 192.168.0.254 |
Indstil administrationsruten for administrationsporten. I eksemplet er standardgatewayen (Next Hop) for switchen 192.168.0.254. |
S25/S50 IP-konfiguration til administration
Kommando |
Formål |
FTOS# configure |
Gå til konfigurationstilstand. |
FTOS(conf)# interface gi0/1 |
Indtast den grænseflade, du vælger til administrationsadgang. |
FTOS(conf)# interface vlan 10 |
Du kan vælge en fysisk grænseflade eller en virtuel VLAN-grænseflade. |
FTOS(config-if-gi-0/1)# ip address 192.168.1.1 255.255.255.0 |
Tildel IP-adressen til grænsefladen. |
FTOS(config-if-gi-0/1)# no shutdown |
Aktiver brugergrænsefladen. |
Force10 S60-44T
10 Apr 2021
3
How To