Article Number: 000136764
Update the firmware version to 1.56.55 iDRAC7 or higher. Previous firmware version store debug log, which eventually causes the iDRAC7 memory to be full, recording logs as increases. As the available memory is reduced , the performance can decrease and finally the iDRAC7 may stop responding .
This occurs after about 45-100 days of continuous operation. The problem can be accelerated when OMSA is used.
Conduct a RACADM reset every 30 days or before the iDRAC7 unresponsive.
Once the iDRAC7 has stopped responding , you can reset the power rack and the tower model servers, or do a virtual reseat on a blade server.
28 Sep 2021
4
Solution