Recovering Windows on Alienware systems with the Dell Direct USB Key
Resumen:This article will help you to know what the Dell Direct USB key is and how to use it with your Alienware Computer.
Seleccione un producto para comprobar la relevancia del artículo
Este artículo se aplica a Este artículo no se aplica aEste artículo no está vinculado a ningún producto específico.No se identifican todas las versiones del producto en este artículo.
The Dell Direct USB Key or DUSB key is designed to provide a quick resolution if an operating system issue allowing you to recover Windows, back up your data and diagnose your hard drive all at once.
The key will install the following:
Operating System – Windows (the version originally shipped with the computer).
To use the DUSB key watch the video or follow the steps that are listed below:
Note: If you have a SSD (SSD 2.5", mSATA or M2 type and higher than 128GB of storage space) and you want to install the Operating System on it, move your SSD to the first Boot Priority in the Legacy Boot Options in the System Bios.
Power off the computer.
Disconnect all devices (except the keyboard, mouse and monitor if there is a desktop). For laptops, ensure the power adapter is connected.
Connect the DUSB key to the computer.
Power on the computer and tap the F12 key on the keyboard.
Choose the USB key (It may be listed by the device manufacturer, such as Toshiba) from the list and press Enter and then wait for the USB key to prepare the Recovery & Restore Environment.
Select the language.
In the End User License Agreement scroll to the bottom, check "I Accept", and click Continue
The next screen will provide the "Process Overview", click Continue.
They key will now test your Hard Drive. Once the Process is completed it will provide an Analysis of the test performed. Click Continue or Exit based on the analysis provided. If the issue is fixed, clicking on Exit will restart the system back to the desktop.
If the issue is not fixed and you click continue the key will automatically back up your information. If you click on Select More, you would be prompted to connect the external storage device for data backup and if you click on Skip it will just proceed to reinstall Windows from Scratch.
Once the process finishes, remove the DUSB key and click on restart.
The process will now continue automatically and the system may restart several times until finally it takes you to the desktop.
Once there, just follow the instructions on how to install any required additional drivers to have your system completely back up and running.