Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Unidades DVDRW TSST e PLDS não encontradas no Windows 7

Cet article a peut-être été traduit automatiquement. Si vous avez des commentaires concernant sa qualité, veuillez nous en informer en utilisant le formulaire au bas de cette page.

Contenu de l’article


Résolution

Specific DVDRW Drives Not Found in Windows 7 After Upgrade
 

 

Table of Contents:

 


 

 

 

Before You Begin: Automatically Detect Your DVDRW Drive Type and Storage Controller to Determine Your Solution

 


Problem: TSST or PLDS Optical Drive Not Seen in Windows 7

 

PLDS DS-8A3S and DL-8ATS DVD-/+RW drives might not be seen in Windows 7 or the drive icon is not shown in "My Computer". Also, TSST TS-L633B DVD-/+RW drives with a firmware version prior to FW10 might not be seen or recognized in Windows 7 when a disc is inserted into to the drive.

 

Back to Top

 


Solution 1: Update the PLDS Optical Drive Firmware (Windows Storage Controller)

Download the appropriate firmware for your DVDRW drive as listed in the automated tool above from the Dell Support Website:

 

Attempt to complete the instructions below as quickly as possible to avoid the optical drive disappearing again.

  1. Ensure the system is running on AC power.
  2. Extract the Windows flash utility to the Desktop.
  3. Insert a data disc into the drive, wait until the Auto Run windows pop up. You may need to re-insert the disc multiple times if the Auto Run window does not pop up.
  4. Execute the Windows flash utility as quick as possible after the "Auto Run" windows pop up.

 

 

Back to Top

 


 

Solution 2: Update the PLDS Optical Drive Firmware (Intel Storage Controller)

Download the appropriate firmware for your DVDRW drive as listed in the automated tool above from the Dell Support Website:

 

 

  1. Ensure the system is running on AC power.
  2. Under the SATA Drives category of Dell Drivers and Downloads for your system, download the Intel - Driver (Matrix Storage Manager - Notebooks). Execute and install it accordingly. For information on downloading and installing drivers for your Dell computer, visit the link below:

     

     

  3. Shut down the system (do not reboot the system by selecting Restart). Boot the system up again.
  4. If the drive is still not detected, insert a data disc into the drive, click Start, in the Search box type Device Manager. Find the DVD/CD-Rom drives category and right-click the drive. Click Scan for hardware changes, and the drive should be detected.
  5. Extract and execute the firmware flash utility.

 

 

Back to Top

 


Solution 3: Update the TSST Optical Drive Firmware (Windows Storage Controller)

Download the appropriate firmware for your DVDRW drive as listed in the automated tool above from the Dell Support Website:

TSST TS-L633B firmware version DW10 - R235097.EXE

 

  1. Remove any media in the drive.
  2. Verify that the drive is detected after removing the disc. Click Start, click Computer, and look for a DVD RW drive under Devices with Removable Storage.
  3. Follow the instructions provided to run the file above and update the firmware for the drive.

 

 

Back to Top

 


Solution 4: Update the TSST Optical Drive Firmware (Intel Storage Controller)

Download the appropriate firmware for your DVDRW drive as listed in the automated tool above from the Dell Support Website:

TSST TS-L633B firmware version DW10 - R235097.EXE

 

  1. Remove any media in the drive.
  2. Under the SATA Drives category of Dell Drivers and Downloads for your system, download the Intel - Driver (Matrix Storage Manager - Notebooks). Execute and install it accordingly. For information on downloading and installing drivers for your Dell computer, visit the link below:

     

     

  3. Shut down the system (do not reboot the system by selecting Restart). Boot the system up again.
  4. The drive will be detected once the storage driver is upgraded.
  5. Follow the instructions provided to run the file above and update the firmware for the drive.

 

 

Back to Top

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

Propriétés de l’article


Dernière date de publication

10 avr. 2021

Version

5

Type d’article

Solution