Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge T320 Systems Owner's Manual

PDF

Hard-Drive Indicator Patterns

Figure 1. Hard-Drive IndicatorsThe figure shows hard-drive indicators.
  1. hard-drive activity indicator (green)
  2. hard-drive status indicator (green and amber)
  • NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side) does not function and remains off.
Drive-Status Indicator Pattern (RAID Only)
Condition
Blinks green two times per second
Identifying drive or preparing for removal
Off
Drive ready for insertion or removal
  • NOTE: The drive status indicator remains off until all hard drives are initialized after the system is turned on. Drives are not ready for insertion or removal during this time.
Blinks green, amber, and off
Predicted drive failure
Blinks amber four times per second
Drive failed
Blinks green slowly
Drive rebuilding
Steady green
Drive online
Blinks green three seconds, amber three seconds, and off six seconds
Rebuild aborted

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\