Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge VRTX Enclosure Owner's Manual

Back panel features and indicators

Figure 1. Back panel features and indicators
The figure shows the back panel features and indicators.
Table 1. Back panel features and indicatorsItem 1 are the low-profile PCIe expansion card slots that allows you to connect up to five low-profile PCI Express expansion cards. Item 2 are the full height PCIe expansion card slots that allows you to connect up to three full-height PCI Express expansion cards. Item 3 is the CMC GbE port 2 that connects the network cable from the management system to the secondary CMC. Item 4 is the CMC GbE port 1 that connects the network cable from the management system to the primary CMC. Item 5 is DB-9 serial connector used for CMC configuration. Item 6 are the blower modules that provide for cooling for the server modules. Item 7 are the I/O module ports that provide network interface for I/O modules. Item 8 is the Power supply unit (PSU4) that has AC PSU of 1100 W or 1600 W. Item 9 is the Power supply unit (PSU3) that has AC PSU of 1100 W or 1600 W. Item 10 is the Power supply unit (PSU2) that has AC PSU of 1100 W or 1600 W. Item 11 is the Power supply unit (PSU1) that has AC PSU of 1100 W or 1600 W.
ItemIndicator, Button, or ConnectorIconDescription
1PCIe expansion card slots low-profile (5)Allows you to connect up to five low-profile PCI Express expansion cards.
2PCIe expansion card slots full height (3)Allows you to connect up to three full-height PCI Express expansion cards.
3CMC GbE port 2GbE port iconConnects the network cable from the management system to the secondary CMC.
4CMC GbE port 1GbE port iconConnects the network cable from the management system to the primary CMC.
5Serial connectorserial connector iconDB-9 serial connector for CMC configuration.
6Blower modules (4)Provide cooling for the server modules.
7I/O module portsNetwork interface for I/O modules.
8 Power supply unit (PSU) (PSU4)1100 W or 1600 W AC
9PSU (PSU3)1100 W or 1600 W AC
10PSU (PSU1)1100 W or 1600 W AC
11PSU (PSU2)1100 W or 1600 W AC

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\