Dell EMC OpenManage CIM Reference Guide Version 9.1

CIM_Slot

The CIM_Slot class listed in Table below represents connectors into which packages are inserted. For example, a physical package that is a hard drive can be inserted into a small computer system interface-single connector attachment (SCSI-SCA) slot. As another example, a card can be inserted into a 16-, 32-, or 64-bit expansion slot on a host board

Table 1. CIM_Slot Properties. The following table describes the properties and data type of the CIM Slot class.
Class Name: class CIM_Slot Parent Class:CIM_PhysicalConnector

Property	Description	Data Type
ConnectorType	See Connector Type Values	uint16
SupportsHotPlug	Indicates whether the slot supports hot-plug adapter cards.	Boolean
MaxDataWidth	Indicates the maximum bus width in bits of adapter cards that can be inserted into this slot. Values for the MaxDataWidth property are as follows: 0 - Unknown 1 - Other 8 - bits 16 - bits 32 - bits 64 - bits 128 - bits	uint16
SystemSlotType	Indicates the type of system slot. Values for the SystemSlotType property are as follows: 1 - Other 2 - Unknown 3 - ISA 4 - MCA 5 - EISA 6 - PCI 7 - PCMCIA 8 - VL-VESA 9 - Proprietary 10 - Processor card Slot 11- Proprietary memory card slot 12- I/O Riser card slot 13 - NuBus 14- PCI - 66MHz capable 15 - AGP 16 - AGP 2X 17 - AGP 4X 18 - PCI-X 19 - AGP 8X 160 - PC-98/C20 161 - PC-98/C24 162 - PC-98/E 163 - PC-98/Local bus 164 - PC-98/Card 165 - PCI Express 166 - PCI Express x1 167 - PCI Express x2 168 - PCI Express x4 169 - PCI Express x8 170 - PCI Express x16 171 - PCI Express Gen 2 172 - PCI Express Gen 2 x1 173 - PCI Express Gen 2 x2 174 - PCI Express Gen 2 x4 175 - PCI Express Gen 2 x8 176 - PCI Express Gen 2 x16

Welcome

Welcome to Dell

Dell EMC OpenManage CIM Reference Guide Version 9.1

CIM_Slot

Rate this content