- Notes, cautions, and warnings
- Introduction
- What’s New in this release
- Supported SNMP Versions
- Managed Object Used in This Document
- Server Administrator Instrumentation MIB
- Server Administrator Baseboard Management Controller, ASF MIB
- Server Administrator Storage Management MIB
- Server Administrator Field Replaceable Unit MIB
- Server Administrator Change Management MIB
- Basic Terminology
- Frequently Used Terms in Variable Names
- Tables
- Section Organization
- Other Documents You May Need
- Introduction to the Server Administrator SNMP Subagent
- Server Administrator Group
- Instrumentation MIB Version Group
- Systems Management Software Group
- System State Group
- Chassis Information Group
- Operating System Group
- System Resource Group
- Power Group
- Thermal Group
- Remote Flash BIOS Group
- Port Group
- Device Group
- Device Tables
- Pointing Device Table
- Keyboard Device Table
- Processor Device Table
- Processor Device Status Table
- Cache Device Table
- Memory Device Table
- Memory Device Mapped Address Table
- Generic Device Table
- PCI Device Table
- PCI Device Configuration Space Table
- Network Device Table
- Managed System Services Device Table
- SD Card Unit Table
- SD Card Device Table
- Device Group Variable Values
- Device Tables
- Slot Group
- Memory Group
- BIOS Setup Control Group
- Local Response Agent Group
- Cost of Ownership Group
- Cluster Group
- Baseboard Management Controller Group
- Field Replaceable Unit Group
- Storage Management Group
- Storage Management Group
- Storage Management Information Group
- Global Data Group
- Physical Devices Group
- Controller Table
- Channel Table
- Enclosure Table
- Array Disk Table
- Array Disk Enclosure Connection Table
- Array Disk Channel Connection Table
- Fan Table
- Fan Connection Table
- Power Supply Table
- Power Supply Connection Table
- Temperature Probe Table
- Temperature Probe Connection Table
- Enclosure Management Module Table
- Enclosure Management Module Connection Table
- Battery Table
- Battery Connection Table
- Tape Drive Table
- NVME adapter table
- Logical Devices Group
- Storage Management Event Group
- Change Management Group
- SNMP Traps
- Storage Management Alert Reference
- Standard Data Type Definitions
- SNMP Sample Output
Dell OpenManage SNMP Reference Guide Version 8.3
Power Group Variable Values
This section
includes definitions for server administrator-specific variable values
used in this section.
| Variable Name: DellPowerSupplyStateCapabilitiesUnique DellPowerSupplyStateCapabilitiesUnique | |
| Data Type: Integer Integer | |
| Possible Data Values | Meaning of Data Value |
| unknown(1) unknown(1) | The power supply’s capabilities are unknown. |
| onlineCapable(2) onlineCapable(2) | The power supply can be disabled (offline, a binary 0 value) or enabled (online, a binary 1 value). |
| notReadyCapable(4) notReadyCapable(4) | The power supply’s capabilities are not ready. |
| Variable Name: DellPowerSupplyStateSettingsUnique DellPowerSupplyStateSettingsUnique | |
| Data Type: Integer Integer | |
| Possible Data Values | Meaning of Data Value |
| unknown(1)unknown(1) | The power supply’s capabilities are unknown. |
| onLine(2) onLine(2) | The power supply’s state is disabled (offline, a binary 0 value) or enabled (online, a binary 1 value). |
| notReady(4)notReady(4) | The power supply’s state is not ready. |
| fanFailure(8)fanFailure(8) | The power supply fan has failed. |
| onlineAndFanFailure(10)onlineAndFanFailure(10) | The power supply is online and indicating that its fan is not working. |
| powerSupplyIsON(16) powerSupplyIsON(16) | The power supply is indicating that it is on. |
| powerSupplyIsOk(32)powerSupplyIsOk(32) | The power supply is indicating that it is OK. |
| acSwitchIsON(64)acSwitchIsON(64) | The power supply is indicating that the AC power switch is on. |
| onlineandAcSwitchIsON (66) onlineandAcSwitchIsON (66) | The power supply is online and indicating that the AC power supply switch capability is activated. |
| acPowerIsON(128) acPowerIsON(128) | The power supply is indicating that the AC power is on. |
| onlineAndAcPowerIsON (130) onlineAndAcPowerIsON (130) | The power supply is online and indicating that the AC power is on. |
| onlineAndPredictiveFail ure(210) onlineAndPredictiveFail ure(210) | The power supply is online and indicating that it has a problem. |
| acPowerAndSwitchAreOn PowerSupplyIsOnIsOkAnd Online(242) acPowerAndSwitchAreOn PowerSupplyIsOnIsOkAnd Online(242) | The power supply is online and OK. |
| Variable Name: DellPowerSupplyType DellPowerSupplyType | |
| Data Type: Integer Integer | |
| Possible Data Values | Meaning of Data Value |
| powerSupplyTypeIsOther(1) powerSupplyTypeIsOther(1) | The power supply type is not one of the following: |
| powerSupplyTypeIsUnknown(2) powerSupplyTypeIsUnknown(2) | The power supply type is unknown (not known or not monitored). |
| powerSupplyTypeIsLinear(3) powerSupplyTypeIsLinear(3) | The power supply type is a linear power supply. |
| powerSupplyTypeIsSwitching(4) powerSupplyTypeIsSwitching(4) | The power supply type is a switching power supply. |
| powerSupplyTypeIsBattery(5)powerSupplyTypeIsBattery(5) | The power supply type is a battery. |
| powerSupplyTypeIsUPS(6) powerSupplyTypeIsUPS(6) | The power supply type is an uninterruptable power supply. |
| powerSupplyTypeIsConverter(7) powerSupplyTypeIsConverter(7) | The power supply type is a power converter power supply. |
| powerSupplyTypeIsRegulator(8) powerSupplyTypeIsRegulator(8) | The power supply type is a regulator power supply. |
| powerSupplyTypeIsAC(9)powerSupplyTypeIsAC(9) | The power supply type is an AC power supply. |
| powerSupplyTypeIsDC(10) powerSupplyTypeIsDC(10) | The power supply type is a DC power supply. |
| powerSupplyTypeIsVRM(11)powerSupplyTypeIsVRM(11) | The power supply type is a voltage regulator module (VRM) power supply. |
| Variable Name: DellPowerSupplySensorState DellPowerSupplySensorState | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| presenceDetected(1) presenceDetected(1) | The power supply’s presence is detected. |
| psFailureDetected(2) psFailureDetected(2) | The power supply failure is detected. |
| predictiveFailure(4)predictiveFailure(4) | The power supply sensor detects predictive failure |
| psACLost(8) psACLost(8) | The power supply’s AC power is lost. |
| acLostOrOutOfRange(16) acLostOrOutOfRange(16) | The power supply’s AC power is lost or out of range. |
| acOutOfRangeButPresent(32) acOutOfRangeButPresent(32) | The power supply’s AC power is present, but it is out of range. |
| configurationError(64)configurationError(64) | The power supply sensor detects a configuration error. |
| Variable Name: DellPowerSupplyConfigurationErrorType DellPowerSupplyConfigurationErrorType | |
| Data Type: Integer Integer | |
| Possible Data Values | Meaning of Data Value |
| vendorMismatch(1) vendorMismatch(1) | The power supply configuration error type is vendor mismatch. |
| revisionMismatch(2) revisionMismatch(2) | The power supply configuration error type is revision mismatch. |
| processorMissing(3)processorMissing(3) | The power supply configuration error type is processor missing. |
| Variable Name: DellVoltageType DellVoltageType | |
| Data Type: Integer Integer | |
| Possible Data Values | Meaning of Data Value |
| voltageProbeTypeIsOther(1) voltageProbeTypeIsOther(1) | The voltage probe type is not one of the following: |
| voltageProbeTypeIsUnknown(2) voltageProbeTypeIsUnknown(2) | The voltage probe type is unknown (not known or not monitored). |
| voltageProbeTypeIs1Point5Volt (3) voltageProbeTypeIs1Point5Volt (3) | The voltage probe type is a 1.5-volt (V) probe. |
| voltageProbeTypeIs3Point3Volt (4) voltageProbeTypeIs3Point3Volt (4) | The voltage probe type is a 3.3-V probe. |
| voltageProbeTypeIs5Volt(5) voltageProbeTypeIs5Volt(5) | The voltage probe type is a 5-V probe. |
| voltageProbeTypeIsMinus5Volt (6) voltageProbeTypeIsMinus5Volt (6) | The voltage probe type is a –5-V probe. |
| voltageProbeTypeIs12Volt(7) voltageProbeTypeIs12Volt(7) | The voltage probe type is a 12-V probe. |
| voltageProbeTypeIsMinus12Volt (8) voltageProbeTypeIsMinus12Volt (8) | The voltage probe type is a –12-V probe. |
| voltageProbeTypeIsIO(9) voltageProbeTypeIsIO(9) | The voltage probe type is an I/O volt probe. |
| voltageProbeTypeIsCore(10) voltageProbeTypeIsCore(10) | The voltage probe type is a core volt probe. |
| voltageProbeTypeIsFLEA(11) voltageProbeTypeIsFLEA(11) | The voltage probe type is a FLEA (standby) volt probe. |
| voltageProbeTypeIsBattery(12)voltageProbeTypeIsBattery(12) | The voltage probe type is a battery volt probe. |
| voltageProbeTypeIsTerminator (13) voltageProbeTypeIsTerminator (13) | The voltage probe type is a SCSI termination volt probe. |
| voltageProbeTypeIs2Point5Volt (14) voltageProbeTypeIs2Point5Volt (14) | The voltage probe type is a 2.5-V probe. |
| voltageProbeTypeIsGTL(15) voltageProbeTypeIsGTL(15) | The voltage probe type is a ground termination logic (GTL) probe. |
| voltageProbeTypeIsDiscrete(16) voltageProbeTypeIsDiscrete(16) | The voltage probe type is a voltage probe with discrete reading. |
| Variable Name: DellVoltageDiscreteReading DellVoltageDiscreteReading | |
| Data Type: Integer Integer | |
| Possible Data Values | Meaning of Data Value |
| voltageIsGood(1) voltageIsGood(1) | The voltage probe discrete reading is good. |
| voltageIsBad(2) voltageIsBad(2) | The voltage probe discrete reading is bad. |
| Variable Name: DellAmperageType DellAmperageType | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| amperageProbeTypeIsOther(1) amperageProbeTypeIsOther(1) | The amperage probe type is not one of the following: |
| amperageProbeTypeIsUnknown(2) amperageProbeTypeIsUnknown(2) | The amperage probe type is unknown (not known or not monitored). |
| amperageProbeTypeIs1Point5Volt(3)amperageProbeTypeIs1Point5Volt(3) | The amperage probe type is a 1.5-ampere (A) probe. |
| amperageProbeTypeIs3Point3volt(4) amperageProbeTypeIs3Point3volt(4) | The amperage probe type is a 3.3-A probe. |
| amperageProbeTypeIs5Volt(5)amperageProbeTypeIs5Volt(5) | The amperage probe type is a 5-A probe. |
| amperageProbeTypeIsMinus5Volt(6) amperageProbeTypeIsMinus5Volt(6) | The amperage probe type is a –5-A probe. |
| amperageProbeTypeIs12Volt(7) amperageProbeTypeIs12Volt(7) | The amperage probe type is a 12-A probe. |
| amperageProbeTypeIsMinus12Volt(8) amperageProbeTypeIsMinus12Volt(8) | The amperage probe type is a –12-A probe. |
| amperageProbeTypeIsIO(9) amperageProbeTypeIsIO(9) | The amperage probe type is an I/O amperage probe. |
| amperageProbeTypeIsCore(10) amperageProbeTypeIsCore(10) | The amperage probe type is a core amperage probe. |
| amperageProbeTypeIsFLEA(11) amperageProbeTypeIsFLEA(11) | The amperage probe type is a FLEA (standby) amperage probe. |
| amperageProbeTypeIsBattery(12) amperageProbeTypeIsBattery(12) | The amperage probe type is a battery amperage probe. |
| amperageProbeTypeIsTerminator(13) amperageProbeTypeIsTerminator(13) | The amperage probe type is a Small Computer System Interface (SCSI) termination amperage probe. |
| amperageProbeTypeIs2Point5Volt(14) amperageProbeTypeIs2Point5Volt(14) | The amperage probe type is a 2.5-V amperage probe. |
| amperageProbeTypeIsGTL(15) amperageProbeTypeIsGTL(15) | The amperage probe type is a Gunning Transceiver Logic (GTL) probe. |
| amperageProbeTypeIsDiscrete(16) amperageProbeTypeIsDiscrete(16) | The amperage probe type is an amperage probe with discrete reading. |
| amperageProbeTypeIsPowerSupplyAmps(23) amperageProbeTypeIsPowerSupplyAmps(23) | The amperage probe type is power supply probe with reading in Amperes. |
| amperageProbeTypeIsPowerSupplyWatts (24) amperageProbeTypeIsPowerSupplyWatts (24) | The amperage probe type is power supply probe with reading in Watts. |
| amperageProbeTypeIsSystemAmps(25) amperageProbeTypeIsSystemAmps(25) | The amperage probe type is system probe with reading in Amperes. |
| amperageProbeTypeIsSystemWatts(26) amperageProbeTypeIsSystemWatts(26) | The amperage probe type is system probe with reading in Watts. |
| Variable Name: DellAmperageDiscreteReading DellAmperageDiscreteReading | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| amperageIsGood(1) amperageIsGood(1) | The amperage probe discrete reading is good. |
| amperageIsBad(2) amperageIsBad(2) | The amperage probe discrete reading is bad. |
| Variable Name: DellACPowerSwitchCapabilities DellACPowerSwitchCapabilities | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| unknownCapabilities(1) unknownCapabilities(1) | The AC power switch’s capabilities are unknown. |
| inputSourceCord1NoReturnCapable(2) inputSourceCord1NoReturnCapable(2) | Input source is AC power cord 1, with no return. |
| inputSourceCord1ReturnCapable(4) inputSourceCord1ReturnCapable(4) | Input source is AC power cord 1, with return. |
| inputSourceCord2NoReturnCapable(8) inputSourceCord2NoReturnCapable(8) | Input source is AC power cord 2, with no return. |
| inputSourceCord2ReturnCapable(16) inputSourceCord2ReturnCapable(16) | Input source is AC power cord 2, with return. |
| inputSourceSharedCapable(32) inputSourceSharedCapable(32) | Input source is shared. |
| Variable Name: DellACPowerSwitchSettings DellACPowerSwitchSettings | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| unknown(1) unknown(1) | The AC power switch’s settings are unknown. |
| inputSourceCord1NoReturn(2) inputSourceCord1NoReturn(2) | Input source is AC power cord 1, with no return. |
| inputSourceCord1Return(4) inputSourceCord1Return(4) | Input source is AC power cord 1, with return. |
| inputSourceCord2NoReturn(8)inputSourceCord2NoReturn(8) | Input source is AC power cord 2, with no return. |
| inputSourceCord2Return(16) inputSourceCord2Return(16) | Input source is AC power cord 2, with return. |
| inputSourceShared(32) inputSourceShared(32) | Input source is shared. |
| Variable Name: DellACPowerSwitchRedundancyMode DellACPowerSwitchRedundancyMode | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| nonRedundant(1) nonRedundant(1) | The AC power switch is not expecting redundancy. |
| redundant(2)redundant(2) | The AC power switch is expecting redundancy. |
| Variable Name: DellACPowerCordStateCapabilities DellACPowerCordStateCapabilities | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| unknown(1) unknown(1) | The AC power cord’s capabilities are unknown. |
| onlineCapable(2) onlineCapable(2) | The AC power cord can be disabled (offline) or enabled (online). |
| notReadyCapable(4)notReadyCapable(4) | The AC power cord’s capabilities are not ready. |
| Variable Name: DellACPowerCordStateSettings DellACPowerCordStateSettings | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| unknown(1) unknown(1) | The AC power cord’s state is unknown. |
| online(2) online(2) | The AC power cord’s state is disabled (offline) 0 or enabled (online) 1. |
| notReady(4)notReady(4) | The AC power cord’s state is not ready. |
| acPowerCordHasPower (8) acPowerCordHasPower (8) | The AC power cord has power. |
| acPowerCordIsActive Source(16) acPowerCordIsActive Source(16) | The AC power cord is the active source of AC power. |
| Variable Name: DellBatteryReading DellBatteryReading | |
| Data Type: IntegerInteger NOTE: These values are bit masks, so combination values are possible. |
|
| Possible Data Values | Meaning of Data Value |
| predictiveFailure(1) predictiveFailure(1) | Battery sensor detects predictive failure. |
| failed(2) failed(2) | Battery has failed. |
| presenceDetected(4) presenceDetected(4) | Battery presence is detected. |
| Variable Name: DellPowerCapCapabilities DellPowerCapCapabilities | |
| Data Type: IntegerInteger NOTE: These values are bit masks, so combination values are possible. |
|
| Possible Data Values | Meaning of Data Value |
| none(0) none(0) | No power cap capabilities are available. |
| enable(1) enable(1) | Power cap can be enabled. |
| disable(2) disable(2) | Power cap can be disabled. |
| Variable Name: DellPowerCapSetting DellPowerCapSetting | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| disabled(0) disabled(0) | Power cap is disabled. |
| enabled(1)enabled(1) | Power cap is enabled. |
| Variable Name: DellPowerProfileType DellPowerProfileType | |
| Data Type: IntegerInteger NOTE: These values are bit masks, so combination values are possible. |
|
| Possible Data Values | Meaning of Data Value |
| maxPerformance(1) maxPerformance(1) | Power profile type is Maximum Performance. |
| osControl(2) osControl(2) | Power profile type is OS control. |
| activePowerController(4) activePowerController(4) | Power profile type is Active Power Controller. |
| custom(8) custom(8) | Power profile type is Custom. |
| Variable Name: DellCPUPowerPerformanceManagementType DellCPUPowerPerformanceManagementType | |
| Data Type: Integer Integer NOTE: These values are bit masks, so combination values are possible. |
|
| Possible Data Values | Meaning of Data Value |
| maxPerformance(1) maxPerformance(1) | CPU power and performance management type is Maximum Performance. |
| minPower(2) minPower(2) | CPU power and performance management type is Minimum Power. |
| osDBPM(4) osDBPM(4) | CPU power and performance management type is OS Demand Based Power Management. |
| systemDBPM(8) systemDBPM(8) | CPU power and performance management type is System Demand Based Power Management. |
| Variable Name: DellMemoryPowerPerformanceManagementType DellMemoryPowerPerformanceManagementType | |
| Data Type: IntegerInteger NOTE: These values are bit masks, so combination values are possible. |
|
| Possible Data Values | Meaning of Data Value |
| maxPerformance(1) maxPerformance(1) | Memory power and performance management type is Maximum Performance. |
| mhz1333(2)mhz1333(2) | Memory power and performance is 1333 MHz. . |
| mhz1067(4)mhz1067(4) | Memory power and performance is 1067 MHz. |
| mhz800(8) mhz800(8) | Memory power and performance is 800 MHz. |
| minPower(16) minPower(16) | Memory power and performance management type is Minimum Power. |
| Variable Name: DellFanPowerPerformanceManagementType DellFanPowerPerformanceManagementType | |
| Data Type: IntegerInteger NOTE: These values are bit masks, so combination values are possible. |
|
| Possible Data Values | Meaning of Data Value |
| maxPerformance(1) maxPerformance(1) | Fan power and performance management type is Maximum Performance. |
| minPower(2)minPower(2) | Fan power and performance management type is Minimum Power. |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\