Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

PDF

Integrated Devices

Table 1. Integrated Devices Options
Group	Option	Valid Arguments	Description
Integrated Devices	`--EmbNicPort nBootProto`	`Unknown, None, Pxe, Iscsi`	Controls the legacy boot protocol of the LOM port specified by the embedded NIC port number. This is a write-only attribute. This attribute is for systems management software use, and does not appear in system BIOS setup. This attribute always returns Unknown, when read. There is no change to the LOM port legacy boot protocol setting when Unknown is returned. An error is returned if written with a setting ( `None, PXE, or iSCSI`) that is not supported by the LOM Port.
	`--EmbVideo`	`Enabled, Disabled`	Enables or disables the BIOS support for the Embedded Video Controller.
	`--IntegratedNetwork1`	`Enabled, DisabledOs,`	Enables or disables Integrated Network 1. NOTE: If set to `DisabledOs`, the Integrated NICs may still be available for shared network access by the embedded management controller. This function must be configured through the NIC management utilities provided with your system.
	`--IntegratedNetwork2`	`Enabled, DisabledOs`	Enables or disables Integrated Network 2. NOTE: If set to `DisabledOs`, the Integrated NICs may still be available for shared network access by the embedded management controller. This function must be configured through the NIC management utilities provided with your system.
	`--IntegratedRaid`	`Enabled, Disabled`	Enables or disables the integrated RAID controller.
	`--IntegratedSas`	`Enabled, Disabled`	Enables or disables the integrated SAS controller.
	`--InternalSdCard`	`On, Off`	Turns the internal SD card port on or off.
	`--InternalSdCardRedundancy`	`Mirror, Disabled`	Sets the internal SD card port redundancy to `Mirror` mode or `Disabled`. When set to `Mirror` mode, read-write operation occurs on both the secure digital (SD) cards. When one of the SD cards fails and is replaced, on booting, the data of the active card is copied to the offline card. When set to `Disabled`, read-write operation occurs only on SD card 1. NOTE: On Blade systems, disable the vflash key to configure this option. This option is applicable only on PowerEdge R810, R815, R910, M910, and PowerEdge 12G systems.
	`--InternalUsb`	`On, Off`	Turns the internal USB port on or off.
	`--InternalUsb1`	`On, Off`	Turns the internal USB port 1 on or off.
	`--InternalUsb2`	`On, Off`	Turns the internal USB port 2 on or off.
	`--IoatEngine`	`Enabled, Disabled`	Enables or disables the I/O Acceleration Technology (I/OAT) option.
	`--OsWatchdogTimer`	`Enabled, Disabled`	Aids in the recovery of the operating system when the system does not respond. When set to `Enabled`, the operating system is allowed to initialize the timer. When it is set to `Disabled` (default value), the timer has no effect on the system.
	`--SriovGlobalEnable`	`Enabled, Disabled`	Enables or disables support for Single Root I/O Virtualization (SR-IOV) devices. NOTE: This option is supported on PowerEdge R410, R510, R610, R710, R910, T410, T610, T710, and PowerEdge 12G systems with Intel Xeon processor 7500/6500 series.
	`--UsbPorts`	`AllOn, OnlyBackPortsOn, AllOff`	Sets the user accessible USB Ports. Selecting `OnlyBackPortsOn` disables front USB ports, and selecting `AllOff` disables both front and back USB ports.