- Notes, Cautions, and Warnings
- Introduction
- Preinstallation Setup
- Installing The iDRAC Service Module On Microsoft Windows Operating Systems
- Installing iDRAC Service Module On Supported Linux Operating System
- Installing The iDRAC Service Module on VMware ESXi
- Installing The iDRAC Service Module On Citrix XenServer
- Configuring The iDRAC Service Module
- Frequently Asked Questions
- Linux Installer Packages
iDRAC Service Module 1.0 Installation Guide
Introduction
This guide provides information and step-by-step instructions on how to install iDRAC Service Module on the supported operating systems.
The Integrated Dell Remote Access Controller(iDRAC) Service Module is a lightweight optional software application that can be installed on Dell 12G Server or later. The iDRAC Service Module complements iDRAC interfaces – Graphical User Interface (GUI), RACADM CLI and Web Service Management (WSMAN) with additional monitoring data. You can configure the features on the supported operating system depending on the features to be installed and the unique integration needs in a work environment.
The iDRAC Service Module architecture uses IP socket communication and provides additional Server Management data (OS/device driver) to iDRAC and presents one-to-many consoles with access to Systems Management data through OS standard interfaces.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"