Cost-effective and reliable data backups, archiving and offsite storage.
Rackable option for performing weekly backups of one or two servers with less than 6TB.
Fast, reliable data backup and archive with a low total cost of ownership.
Automate backups and save time with an affordable, high-density tape autoloader that features a compact 1U design and remote management.
|Dell-supported Tape Backup Software*:|
For a list of supported tape backup software, refer to the Dell PowerVault Tape Compatibility Matrix
|For a list of supported tape backup software, refer to the Dell PowerVault Tape Compatibility Matrix||There are two user interfaces: |
- Operator Control Panel. Located on the front of the PV TL1000 tape library, the user can use the LCD panel to check system status, run diagnostics, view system logs, check and set configurations, verify drive operations, run an inventory and manage the system.
- Remote Web Management. The web-based administration can be accessed via a 10/100 BASE-T connection through any standard web browser. The user can check system status, view system logs, check and set configurations, verify drive operations, run an inventory and manage the system. In addition, the user can upgrade the drive and library firmware via the Remote Management Unit (RMU).
|Dell™ and x86 IBM legacy, Lenovo and HP servers|
For a complete list of servers, refer to the Dell PowerVault Tape Compatibility Matrix: http://www.dell.com/support/home/us/en/04/product-support/product/powervault-lto7/manuals
|Form Factor: 2U Rack Mount|
Height: 86.9 mm (3.42 inch)
Width: 482.5 mm (19.00 inch)
Depth: 480.7 mm (18.93 inch) including bezel
Weight: 8.3 Kg (18.4 lbs)
LED for fan status
Power on/off switch
|Internal and External Drives Available|
1.69" (h) x 5.83 (w) x 8.29" (d)
Weight (3lbs 9 oz)
2.56"(h)x 8.74"(w) x 12.87"(d)
|1U form factor|
Height: 44 mm (1.73 in)
Width (chassis/bezel): 445 mm (17.52 in)/483 mm (19.02 in)
Length: 850 mm (33.46 in)
Weight: 13 kg (28.66 lb)
Orientation: Horizontal only
|Power Requirements: 100-127 VAC|
Power Consumption: Up to 85W with two drives in operation
|Operating Temperature: 50 to 100.4 degrees F, 10 to 38 degrees C|
Non-Operating Temperature (short term/archival): 16 to 35 degrees C (60.8 to 95 degrees F)/16 to 25 degrees C (60.8 to 77 degrees F)
Operating Humidity: 20 to 80% non-condensing
Non-Operating Humidity (short term/archival): 20 to 80%/20 to 50% non-condensing
50 to 100.4 degrees F, 10 to 38 degrees C
20% to 80% RH (non-condensing)
|6Gb SAS HBA for PowerEdge 12th generation servers|
12Gb SAS for PowerEdge 13th generation servers
|Serial Attached SCSI (SAS) at 6Gb/s|
SAS 6Gb HBA for 12th generation Dell PowerEdge servers
SAS 12Gb HBA for 13th generation PowerEdge servers
Internal Tape Adapter HBA for internal drives in 12th generation PowerEdge tower servers
PERC H330 HBA for internal drives in 13th generation PowerEdge tower servers
LTO4 - 800GB
|LTO specifications are an open format designed for interoperability|
Investment protection is assured through backwards compatibility
Linear Tape File System (LTFS) support provides easy data access and management allowing easy file share; LTFS-LE software is available for purchase
|LTO4 - 120MB/sec|
LTO5 - 140MB/sec
LTO6 - 160MB/sec
LTO7 - 300MB/sec
LTO6 and LTO7 drives support 2.5:1 compression. LTO4 and LTO5 drives support 2:1 compression.
|Rack mount standard|
|Library-managed encryption is only available on LTO-6 and later generation TL1000 tape libraries. |
Library-managed encryption enabled PowerVault TL1000 tape libraries can be purchased at point of sale only. Library-managed encryption cannot be enabled on existing TL1000 tape libraries and the feature cannot be purchased after point of sale.
IPv6 Phase 1 & 2 Ready and DoD APL