Broadcom 57810S Dual-Port 10GbE SFP+ CNA Details

intel® core™ processors
Save £80 on Precision 5510 with integrated HD 530 Graphics. Go to offer

Get 10GbE speed for your Dell PowerEdge tower and rack servers.


Bring the speed of dual 10GbE connectivity to your Dell™ PowerEdge™ rack or tower servers with a Broadcom® Converged Network Adaptor.

  • Powerful throughput: Provides two ports of 10 Gigabit Ethernet.
  • Flexible integration: Supports NIC partitioning (NPAR) on 10GbE ports to help improve resource utilization and deployment flexibility.
  • Streamlined management: Helps improve management efficiency through integration into Dell™ Lifecycle Controller 2.0.

Broadcom 57810S Dual-Port 10GbE SFP CNA

Bring 10GbE speed to your tower and rack server environment.

Bring the speed of 10GbE to your tower or rack servers with the Broadcom® 57810S Dual-Port 10GbE SFP+ Converged Network Adapter (CNA). It’s designed to give you fast performance in two- and four-socket Dell tower and rack servers where multiple network or storage connections are required.

  • Increase network efficiency in physical and virtual environments: Enjoy optimized bandwidth allocation with Broadcom’s switch-independent NIC partitioning (NPAR). This feature enables segmentation and reallocation of 10GbE ports according to bandwidth and resource needs.
  • Optimize server performance: Broadcom 10GbE adapters leverage stateless offload such as TCP/IP checksum, TCP segmentation offload (TSO), receive side scaling (RSS), large send offload (LSO) and others to help provide maximum flexibility and optimized performance. 
  • Simplify management: Broadcom 10GbE adapters easily integrate into Dell’s iDRAC7 and Lifecycle Control embedded management framework.


  • Broadcom 57810S

Data Path

  • Eight lanes PCIe – operable in x8 & x16 slots

Data Bus

  • PCI Express (PCIe) 2.0

Form Factor

  • 6.6” x 2.71” (168mm x 68.91mm)

Transfer Rate

  • 10Gbps

Ethernet Ports

  • Two

Wake On LAN

  • No

PXE Support

  • 2.1

Receive Side Scaling (RSS)

  • Yes


  • SFP+

TCP/IP Offload Engine (TOE)

  • Yes

iSCSI boot

  • Yes

Advanced Features

  • Support for:

    • VMware™ NetQueue and Microsoft™ VMQ – Helps to increase performance in virtual server environments
    • Switch independent NIC partitioning (NPAR) – Enables segmentation of a single 10Gigabit Ethernet port into as many as four partitions, allowing dynamic allocation of bandwidth to match application’s work load requirements, ensuring efficient utilization of the 10GbE link.
    • High performance hardware offload for iSCSI storage protocols
    • VLAN support (IEEE 802.1q VLAN tagging) – Helps to improve management efficiency, security and network flexibility
    Precision time protocol (PTP) IEEE 1588-ready – Provides more granular level of time synchronization between the constituents of an Ethernet network.

    • MSI-X – Enhances overall system performance, reduce system overhead, lower interrupt latency and increase host CPU utilization
    • Broadcom Advanced Control Suite (BACS) management application – Streamline management tasks, optimize performance and improve up-time
    • iSCSI remote boot support – Helps IT administrators significantly reduce time to deployment of new or replacement servers.

Standards Supported

  • Standards:
    PCI Express base specification 2.0
    PCI bus power management interface (rev 1.2)
    Advance error reporting
    TCP segmentation/large send offload
    Advanced Error Reporting (AER)
    PCI hot plug/hot swap
    ACPI v2.0 SMBus 2.0 IEEE 802.3ae
    IEEE 1588—Precision Time Protocol (PTP) –Ready
    IEEE 802.1q—Virtual LAN (VLAN) support — VLAN tagging support
    IEEE 802.3x (Flow Control)
    IEEE 802.3ad (Link aggregation)
    IEEE 802.3z (Clause 30) — Statistics for SNMP MIB II, Ethernet-like MIB and Ethernet MIB
    IEEE 802.1ab (Link Level Discovery Protocol)
    Teaming support
    MSI-X supports independent queues
    Data Center Bridging-ready (DCB):

    Compliance: RoHS (EU – Directive 2002/95/EC - and China), FCC Class A, UL, CE, VCCI, BSMI, CTICK, KC

Operating System ​ (Dell recommends Windows 10 Pro.)

  • Microsoft® Windows® 2008 and 2008 R2 Server all editions
    Red Hat Enterprise Linux® (RHEL) 5.x and 6.x
    SUSE® Linux Enterprise Server (SLES) 10 and 11
    VMware® vSphere 4.1 and 5.0

Performance Features

  • Automatic link aggregation and load balancing
    Large Send offload (LSO)
    Receive side scaling (RSS)
    Transmit side scaling (TSS)
    TCP,IP, UDP checksum offload
    VLAN support with VLAN tag
    MSI-X support
    IPv4 and IPv6 offload
    iSCSI HBA full offload
    FCoE- ready HBA full offload
    TCP/IP full offload (TOE)
    Advanced Error Reporting (AER)
    PCI hot plug/hot swap


    Collision Sense Multiple Access/Collision Avoidance
    802.2 Netbios

Environmental Operating Conditions

  • Temperature:
    Operating: 32° to 131°F (0° to 55°C)
    Storage: -40° to 158°F (-40° to 70°C)


  • 1-year limited warranty*
 You can only compare up to 7 products. To compare this item, deselect one of the other 7 products.