Transparently connect Dell™ M-Series blade servers into the LAN of your choice.
Connecting to XAUI-based 10GbE mezzanine cards (10Gb Ethernet Pass-Through II) and KR-based 10GbE mezzanine cards and NDCs (10Gb Ethernet Pass-Through-k).
Call for Pricing
32 total Ethernet ports: 16 internal (server) ports and 16 external (LAN) ports
1:1 Internal-external port pairs provide dedicated connections for isolated bandwidth between server and LAN
Ships with all 32-ports enabled
All external ports are hot-pluggable, enabling expansion without server interruption
All ports enabled standard
External ports also support 10Gb SFP+ LR optics and SFP+ Direct-Attach (copper) cables (0.5m, 1m, 3m, 5m, 7m)
Supported Adapters (by model):Adapter (NIC/CNA) support varies based on model of Pass Through
Dell 10Gb Ethernet Pass Through II supports the following XAUI-based adapters:
Broadcom 57710 mezzanine card
Broadcom 57711 mezzanine card
Intel X520 mezzanine card
Intel X520-x/k mezzanine card
QLogic QME8142 mezzanine card
Emulex OCm10102-f-m mezzanine card
Dell 10Gb Ethernet Pass Through-k supports the following KR-based adapters:
Brocade BR1741M-k mezzanine card
Broadcom 57712-k network daughter card (NDC)
Intel X520-x/k mezzanine card
Future 10Gb adapters for PowerEdge blade servers
Note: 1Gb NICs are not supported with either model of pass-through
- 10 Gigabit per second line speed per port, full duplex
- Connects Dell blade servers using 10 Gigabit Ethernet NIC blade mezzanine I/O cards to external switches
Great solution for Dell™ PowerConnect™, Cisco Catalyst/Nexus switches as well as your choice of external Ethernet switches
- Dell 10Gb Ethernet Pass Through Modules are transparent to all Ethernet topologies, providing connectivity from Dell blades to any vendor’s external LAN switch
- Connect to any industry standard Ethernet compliant device
- Module is unmanaged – all management occurs via NIC firmware or O/S, or external switch Device status is available through the M1000e Chassis Management Controller (CMC)
Dell 10GbE-k Pass-Through Module performs a power on self-test and various ongoing diagnostics to ensure proper operation
Height: 272.75 mm
Width: 32.48 mm
Depth: 307.24 mm
2.6 kg without SFP’s; 3.0 kg with SFP’s
10GbE SFP+ Optical Transceiver, SR, LC Connector
10GbE SFP+ Optical Transceiver, LRM, LC Connector
1m SFP+ Direct Attach Cable Transceiver Assembly
3m SFP+ Direct Attach Cable Transceiver Assembly
5m SFP+ Direct Attach Cable Transceiver Assembly
7m SFP+ Direct Attach Cable Transceiver Assembly
Environmental Operating Conditions
- Please see limits associated with M1000e blade enclosure
- DC Input:
2V from shared power supplies in M1000e blade enclosure
Approximately 20 Watts without SFP’s
Approximately 28 Watts with SFP’s
AssessmentsUsing specialized software, Dell professionals can pinpoint issues and expose flaws in your wired or wireless network. A report will then be issued that includes recommendations on how to improve performance, optimize devices and solutions to other identified problems.
|Network Topology Assessment|
Is your network complex and coiled? Dell can perform a detailed network evaluation to expose design flaws and give you advice on how to architect the future.
|Network Performance Assessment|
Network running slow? We’ll conduct an in-depth analysis to uncover network latency and performance issues of specific servers and applications.
|Wireless Site Survey|
Great wireless connectivity starts with a detailed site survey. Dell can analyze RF interference, identify optimal placement of devices, and recommend the best design.
|Network Security Assessment |
The network is under constant attack. Let our experts examine and uncover any potential holes in the network and provide a comprehensive security design assessment.
DeploymentThe Dell standardized deployment service guarantees that set-up and optimization is done correctly so that you can launch faster and focus on daily business
Mounting and cabling of wired and wireless devices can be tedious and time-consuming. Let Dell install it for you so you know it’s done right.
Setting up network protocols, and policies can be tricky. Dell certified network professionals can configure and optimize your new hardware remotely or onsite.
Dell open systems architecture allows you to interconnect existing network infrastructure from Cisco, HP, Juniper, and others. Our experts will seamlessly weave it all together so you don’t have to.
SupportDell offers a variety of onsite and remote support options that can be added at time of purchase. Dell ProSupport ensures problems are diagnosed and resolved by experts.
|Onsite and Remote Assistance|
Get immediate access to Dell ProSupport professionals who can help you troubleshoot and diagnose issues that may arise in your network.
Free yourself to focus on the business and allow Dell to manage your network with dedicated professional support.
Learn practical knowledge and operational techniques.
ConsultingWhen you need expert technical guidance, you can count on Dell. Our remote consulting team can help solve complex issues no matter where you're located. Plus, you can take advantage of the flexible pay-per-incident option.
Get professional insight with a half-day collaborative whiteboard session to discuss potential improvements. Contact us to request a workshop.
For those times when you need a little extra technical guidance, certified experts are available to discuss system design or help resolve complex issues.
|Available Remote Consulting Services|