Back to Previous Page
Reset chart
Viewing 1-4 of 6
Versatile 10GbE iSCSI SAN arrays built for enterprise environments
Previous
Next
 PS6110EImprove the capacity, performance and flexibility of your mid-tier storage center with the highly scalable EqualLogic™ PS6110E 10GbE iSCSI SAN arrays. View Details |  PS6110STake command of your most demanding enterprise applications with high-performance, low-latency, SSD-based Dell™ EqualLogic™ PS6110S 10GbE iSCSI arrays. View Details | PS6110XDeploy cost-effective performance and capacity for Microsoft® Exchange servers, databases and virtual servers with Dell™ EqualLogic™ PS6110X 10GbE arrays. View Details | PS6110XSExperience SSD low-latency performance with spinning media HDD capacity in one storage solution with the Dell™ EqualLogic™ PS6110XS 10GbE iSCSI array. View Details | PS6110XVMaster critical applications with high-performance Dell™ EqualLogic™ PS6110XV 10GbE iSCSI arrays, ideal for enterprise and corporate distributed sites. View Details | PS6110XV 3.5”Deploy performance and capacity without compromise for your enterprise storage with the cost-effective Dell™ EqualLogic™ PS6110XV 3.5” 10GbE iSCSI array. View Details |
GREAT FOR
Mid-tier scale-out iSCSI storage deployments that need flexible 10GbE connectivity, optimized scalability, maximum capacity and management simplicity. | The most demanding enterprise applications that require very low latency and enhanced random-read I/Os per second (IOPS) performance | Physical and virtual enterprise environments that require an efficient balance of high performance, high capacity and cost effectiveness | Companies seeking the combined advantages of high-speed, low-latency SSD performance and spinning media HDD capacity in one storage solution. | Companies that seek a compact, high-performance 10GbE storage solution for mission-critical enterprise applications. | Enterprise environments that require cost-effective storage arrays that combine high performance and high capacity in a single chassis. |
Product Configurations
| Storage Controllers Dual controllers, each with 4GB* memory for PS-series firmware. Each controller provides cache to flash for data protection. Hard Disk Drives Twenty-four (24) NL-SAS hot-pluggable hard disk drives Drive Capacities 3.5" 7,200 RPM NL-SAS drives available in 1 TB*, 2TB, or 3 TB (3TB also available in NL-SAS SED) System Capacities 12 TB using twenty-four (24) NL-SAS disk drives 24 TB using twenty-four (24) 1 TB NL-SAS disk drives 48 TB using twenty-four (24) 2 TB NL-SAS disk drives 72 TB using twenty-four (24) 3 TB NL-SAS or NL-SAS SED disk drives | Storage Controllers Dual controllers, each with 4GB memory for PS-series firmware. Each controller provides cache to flash for data protection. Hard Disk Drives Twenty-four (24) SSD hot-pluggable hard disk drives Drive Capacities 2.5" SSD drives available in 200 GB* and 400 GB* System Capacities 4.8 TB* using twenty-four (24) 200 GB* SSD drives 9.6 TB* using twenty-four (24) 400 GB* SSD drives | Storage Controllers Dual controllers, each with 4GB memory for PS-series firmware. Each controller provides cache to flash for data protection. Hard Disk Drives Twenty-four (24) 10K SAS (or SAS SED) hot-pluggable hard disk drives Drive Capacities 2.5" 10,000 RPM SAS drives available in 300 GB, 600 GB and 900 GB System Capacities 7.2 TB* using twenty-four (24) 300 GB 10,000 SAS disk drives 14.4 TB using twenty-four (24) 600 GB 10,000 SAS disk drives 21.6 TB using twenty-four (24) 900 GB 10,000 SAS (or SAS SED) disk drives | Storage Controllers Dual controllers, each with 4GB memory for PS-series firmware. Each controller provides cache to flash for data protection. Hard Disk Drives Seven (7) hot-pluggable Solid State Disk (SSD) drives and Seventeen (17) hot-pluggable SAS hard disk drives Drive Capacities Combines 2.5" 400 GB SSD drives and 2.5" 600 GB* 10,000 RPM SAS drives System Capacities 13 TB* using seven (7) 400 GB* SSD drives and seventeen (17) 600 GB 10,000 SAS disk drives | Storage Controllers Dual controllers, each with 4GB memory for PS-series firmware. Each controller provides cache to flash for data protection. Hard Disk Drives Twenty-four (24) 15K SAS hot-pluggable hard disk drives Drive Capacities 2.5" 15,000 RPM SAS drives available in 146 GB, 300GB, or 900GB (300GB also available in SAS SED) System Capacities 3.5 TB* using twenty-four (24) 146 GB* 15,000 SAS disk drives 7.2 TB using twenty-four (24) 300* GB 15,000 SAS (or SAS SED) disk drives | Storage Controllers Dual controllers, each with 4GB memory for PS-series firmware. Each controller provides cache to flash for data protection. Hard Disk Drives Twenty-four (24) 15K SAS hot-pluggable hard disk drives Drive Capacities 3.5” 15,000RPM SAS (or SAS SED) disk drives available in 600 GB System Capacities 14.4 TB* using twenty-four (24) 600 GB* 15,000 3.5" SAS (or SAS SED) disk drives |
Technical Highlights
| Volumes Up to 1,024 Snapshots 512 per volume / up to 10,000 total per group Volume Connections Up to 1,024 Host Protocol Any standards-compliant iSCSI initiator Operating Systems Supported Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3 / 3.5 / 4 / 4.1 / 5, ESXi 3.5 / 4 / 4.1 / 5, Citrix® XenServer™, Novell® NetWare® RAID Support RAID 5, RAID 6, RAID 10, and RAID 50 10GbE Network Interfaces 10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1) 10GbE SFP+ for fiber or twin-ax copper cabling, and one (1) 100BASE-TX dedicated management port per controller TCP Network Support IPv4, IPv6 core support Expansion Option Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group | Volumes Up to 1,024 Snapshots 512 per volume / up to 10,000 total per group Volume Connections Up to 1,024 Host Protocol Any standards-compliant iSCSI initiator Operating Systems Supported Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3 / 3.5 / 4 / 4.1 / 5, ESXi 3.5 / 4 / 4.1 / 5, Citrix® XenServer™, Novell® NetWare® RAID Support RAID 5, RAID 6, RAID 10, and RAID 50 10GbE Network Interfaces 10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1) 10GbE SFP+ for fiber or twin-ax copper cabling, and one (1) 100BASE-TX dedicated management port per controller TCP Network Support IPv4, IPv6 core support Expansion Option Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group | Volumes Up to 1,024 Snapshots 512 per volume / up to 10,000 total per group Volume Connections Up to 1,024 Host Protocol Any standards-compliant iSCSI initiator Operating Systems Supported Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3 / 3.5 / 4 / 4.1 / 5, ESXi 3.5 / 4 / 4.1 / 5, Citrix® XenServer™, Novell® NetWare® RAID Support RAID 5, RAID 6, RAID 10, and RAID 50 10GbE Network Interfaces 10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1) 10GbE SFP+ for fiber or twin-ax copper cabling, and one (1) 100BASE-TX dedicated management port per controller TCP Network Support IPv4, IPv6 core support Expansion Option Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group. | Volumes Up to 1,024 Snapshots 512 per volume / up to 10,000 total per group Volume Connections Up to 1,024 Host Protocol Any standards-compliant iSCSI initiator Operating Systems Supported Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3 / 3.5 / 4 / 4.1 / 5, ESXi 3.5 / 4 / 4.1 / 5, Citrix® XenServer™, Novell® NetWare® RAID Support RAID-6 Accelerated 10GbE Network Interfaces 10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1) 10GbE SFP+ for fiber or twin-ax copper cabling, and one (1) 100BASE-TX dedicated management port per controller TCP Network Support IPv4, IPv6 core support Expansion Option Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group | Volumes Up to 1,024 Snapshots 512 per volume / up to 10,000 total per group Volume Connections Up to 1,024 Host Protocol Any standards-compliant iSCSI initiator Operating Systems Supported Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3 / 3.5 / 4 / 4.1 / 5, ESXi 3.5 / 4 / 4.1 / 5, Citrix® XenServer™, Novell® NetWare® RAID Support RAID 5, RAID 6, RAID 10, and RAID 50 10GbE Network Interfaces 10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1) 10GbE SFP+ for fiber or twin-ax copper cabling, and one (1) 100BASE-TX dedicated management port per controller TCP Network Support IPv4, IPv6 core support Expansion Option Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group. | Volumes Up to 1,024 Snapshots 512 per volume / up to 10,000 total per group Volume Connections Up to 1,024 Host Protocol Any standards-compliant iSCSI initiator Operating Systems Supported Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3 / 3.5 / 4 / 4.1 / 5, ESXi 3.5 / 4 / 4.1 / 5, Citrix® XenServer™, Novell® NetWare® RAID Support RAID 5, RAID 6, RAID 10, and RAID 50 10GbE Network Interfaces 10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1) 10GbE SFP+ for fiber or twin-ax copper cabling, and one (1) 100BASE-TX dedicated management port per controller TCP Network Support IPv4, IPv6 core support Expansion Option Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group |
Reliability
| Vertical port sharing Redundant, hot-swappable controllers; power supplies / cooling fans, and hot-swappable disks Individual disk drive slot power control Cache-to-flash | Vertical port sharing Redundant hot-swappable controllers, power supplies / cooling fans, and hot-swappable disks Individual disk drive slot power control Cache-to-flash | Vertical port sharing Redundant hot-swappable controllers, power supplies / cooling fans, and hot-swappable disks Individual disk drive slot power control Cache-to-flash | Vertical port sharing Redundant hot-swappable controllers, power supplies / cooling fans, and hot-swappable disks Individual disk drive slot power control Cache-to-flash | Vertical port sharing Redundant hot-swappable controllers, power supplies / cooling fans, and hot-swappable disks Individual disk drive slot power control Cache-to-flash | Vertical port sharing Redundant hot-swappable controllers, power supplies / cooling fans, and hot-swappable disks Individual disk drive slot power control Cache-to-flash |
Enclosure Monitoring System
| Automatic spare configuration and utilization SMART Automatic bad block replacement Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drives | Automatic spare configuration and utilization SMART Automatic bad block replacement Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive | Automatic spare configuration and utilization SMART Automatic bad block replacement Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive | Automatic spare configuration and utilization SMART Automatic bad block replacement Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive | Automatic spare configuration and utilization SMART Automatic bad block replacement Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive | Automatic spare configuration and utilization SMART Automatic bad block replacement Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive |
Management
| SAN Headquarters multi-group performance and event monitoring tool Serial console Ability to configure a separate management network SNMP, telnet, SSH, HTTP, Web (SSL), host scripting Multi-administrator support | SAN Headquarters multi-group performance and event monitoring tool Serial console Ability to configure a separate management network SNMP, telnet, SSH, HTTP, Web (SSL), host scripting Multi-administrator support | SAN Headquarters multi-group performance and event monitoring tool Serial console Ability to configure a separate management network SNMP, telnet, SSH, HTTP, Web (SSL), host scripting Multi-administrator support | SAN Headquarters multi-group performance and event monitoring tool Serial console Ability to configure a separate management network SNMP, telnet, SSH, HTTP, Web (SSL), host scripting Multi-administrator support | SAN Headquarters multi-group performance and event monitoring tool Serial console Ability to configure a separate management network SNMP, telnet, SSH, HTTP, Web (SSL), host scripting Multi-administrator support | SAN Headquarters multi-group performance and event monitoring tool Serial console Ability to configure a separate management network SNMP, telnet, SSH, HTTP, Web (SSL), host scripting Multi-administrator support |
Security
| CHAP authentication Access control for iSCSI Access control for management interfaces including Active Directory, LDAP, or RADIUS support | CHAP authentication Access control for iSCSI Access control for management interfaces including Active Directory, LDAP, or RADIUS support | CHAP authentication Access control for iSCSI Access control for management interfaces including Active Directory, LDAP, or RADIUS support | CHAP authentication Access control for iSCSI Access control for management interfaces including Active Directory, LDAP, or RADIUS support | CHAP authentication Access control for iSCSI Access control for management interfaces including Active Directory, LDAP, or RADIUS support | CHAP authentication Access control for iSCSI Access control for management interfaces including Active Directory, LDAP, or RADIUS support |
Notification Methods
| SNMP traps, e-mail, syslog | SNMP traps, e-mail, syslog | SNMP traps, e-mail, syslog | SNMP traps, e-mail, syslog | SNMP traps, e-mail, syslog | SNMP traps, e-mail, syslog |
Power
| AC voltage: 100-240 VAC ±10% single phase 1080W (max, total), +5V up to 155W; +12V up to 924W;+5Vsb up to 10W Frequency: 50/60 Hz Power factor: 0.98 (minimum) Power supplies: Dual 1080 W | AC voltage: 100-240 VAC ±10% single phase, 700 W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W Frequency: 50/60 Hz Power factor: 0.98 (minimum) Power supplies: Dual 700 W | AC voltage: 100-240 VAC ±10% single phase Frequency: 50/60 Hz Power factor: 0.98 (minimum) Power supplies: Dual 700 W | AC voltage: 100-240 VAC ±10% single phase, 700 W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W Frequency: 50/60 Hz Power factor: 0.98 (minimum) Power supplies: Dual 700 W | AC voltage: 100-240 VAC ±10% single phase 700 W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W Frequency: 50/60 Hz Power factor: 0.98 (minimum) Power supplies: Dual 700W | AC voltage: 100-240 VAC ±10% single phase, 1080W (max, total), +5V up to 155W; +12V up to 924W;+5Vsb up to 10W Frequency: 50/60 Hz Power factor: 0.98 (minimum) Power supplies: Dual 1080 W |
Chassis
| Height: 4U / 17.5 cm (6.89 inches) Width: 44.63 cm (17.57 inches) Depth: 57.5 cm (22.6 inches) Weight: 45.36 kg (100 lbs) Packaged physical: Length: 905 cm (35.63 inches) Width: 616 cm (24.25 inches) Depth: 508 cm (20 inches) Packaged weight: 54.4338 Kg (120 lb) Rack Support Dell ReadyRails™ sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to snap into place with screws or other hardware Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to be mounted in racks whose posts have round holes | Height: 2U / 8.68 cm (3.41 inches) Width: 44.63 cm (17.57 inches) Depth: 54.1 cm (21.3 inches) Weight: 25.4 kg (56 lbs) Packaged physical: Length: 851 cm (33.50 inches) Width: 629 cm (24.75 inches) Depth: 395 cm (15.56 inches) Packaged weight: 37.1973 Kg (82 lb) Rack Support Dell ReadyRails™ sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to snap into place with screws or other hardware Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to be mounted in racks whose posts have round holes | Height: 2U / 8.68 cm (3.41 inches) Width: 44.63 cm (17.57 inches) Depth: 54.1 cm (21.3 inches) Weight: 25.4 kg (56 lbs) Packaged physical: Length: 851 cm (33.50 inches) Width: 629 cm (24.75 inches) Depth: 395 cm (15.56 inches) Packaged weight: 37.1973 Kg (82 lb) Rack Support Dell ReadyRails™ sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to snap into place with screws or other hardware Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to be mounted in racks whose posts have round holes | Height: 2U / 8.68 cm (3.41 inches) Width: 44.63 cm (17.57 inches) Depth: 54.1 cm (21.3 inches) Weight: 25.4 kg (56 lbs) Packaged physical: Length: 851 cm (33.50 inches) Width: 629 cm (24.75 inches) Depth: 395 cm (15.56 inches) Packaged weight: 37.1973 Kg (82 lb) Rack Support Dell ReadyRails™ sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to snap into place with screws or other hardware Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to be mounted in racks whose posts have round holes | Height: 2U / 8.68 cm (3.41 inches) Width: 44.63 cm (17.57 inches) Depth: 54.1 cm (21.3 inches) Weight: 25.4 kg (56 lbs) Packaged physical: Length: 851 cm (33.50 inches) Width: 629 cm (24.75 inches) Depth: 395 cm (15.56 inches) Packaged weight: 37.1973 Kg (82 lb) Rack Support Dell ReadyRails™ sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to snap into place with screws or other hardware Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to be mounted in racks whose posts have round holes | Height: 4U / 17.5 cm (6.89 inches) Width: 44.63 cm (17.57 inches) Depth: 57.5 cm (22.6 inches) Weight: 45.36 kg (100 lbs) Packaged physical: Length: 905 cm (35.63 inches) Width: 616 cm (24.25 inches) Depth: 508 cm (20 inches) Packaged weight: 54.4338 Kg (120 lb) Rack Support Dell ReadyRails™ sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to snap into place with screws or other hardware Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to be mounted in racks whose posts have round holes |
Environmental Operating Conditions
| Temperature range: 5° to 40°C (41° to 104°F) Storage temperature: –40° to 65°C (–40° to 149°F) Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft. Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations Acoustics Category 4: <=7.2 bels at 23C +/- 2C Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985 | Temperature range: 5° to 40°C (41° to 104°F) Storage temperature: –40° to 65°C (–40° to 149°F) Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft. Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations Acoustics Category 4: <=7.2 bels at 23C +/- 2C Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985 | Temperature range: 5° to 40°C (41° to 104°F) Storage temperature: –40° to 65°C (–40° to 149°F) Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft. Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations Acoustics Category 4: <=7.2 bels at 23C +/- 2C Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985 | Temperature range: 5° to 40°C (41° to 104°F) Storage temperature: –40° to 65°C (–40° to 149°F) Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft. Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations Acoustics Category 4: <=7.2 bels at 23C +/- 2C Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985 | Temperature range: 5° to 40°C (41° to 104°F) Storage temperature: –40° to 65°C (–40° to 149°F) Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft. Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only Acoustics Category 4: <=7.2 bels at 23C +/- 2C Air quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985 | Temperature range: 5° to 40°C (41° to 104°F) Storage temperature: –40° to 65°C (–40° to 149°F) Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft. Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hour Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations Acoustics Category 4: <=7.2 bels at 23C +/- 2C Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985 |