|

Dell W-Series instant access points

intel® xeon™
Windows XP support has ended.
It's not too late to save on a new Windows PC. Shop Now

WiFi without an external controller

Cost-effective, enterprise-class WiFi networking for a variety of environments. Easy to deploy, use and maintain.

  • Starting Price $41900
  • Total Savings $17200
  • Dell Price $24700
Select
 
 

 

Models

 

 

 

W-AP224 and W-AP225

 

 

 

W-IAP 155 and W-IAP 155P

 

 

 

W-IAP134 and W-IAP135

 

 

 

W-IAP114 and W-IAP115

 

 

 

W-IAP108 and
W-IAP109 (Remote IAPs)

 

 

 

Data rate

 

 

 

1.3 Gbps
3x3 MIMO
802.11ac

 

 

 

900 Mbps
3x3 MIMO

 

 

 

900Mbps (450Mbps each radio)

  

 

450 Mbps
3x3 MIMO

 

 

 

300Mbps

 

 

 

Radios

 

 

 

Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n
indoor

 

 

 

Dual radio, dual-band 802.11n indoor

 

 

 

Dual radios: Simultaneous operation in 2.4 and 5GHz band. (Concurrent operation of both radios in the same band is not supported.)

 

 

 

Dual radio, 5-GHz and 2.4-GHz 802.11n 3x3:3

 

 

 

Dual-radio, dual-band 802.11n indoor

 

 

 

Operating frequencies

 

 

 

2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz

 

 

 

2.400 to 2.4835GHz
5.150 to 5.250GHz
5.250 to 5.350GHz
5.470 to 5.725GHz
5.725 to 5.850GHz

 

 

 

2.4 to 2.5GHz, 5.150 to 5.950GHz with DFS support.

 

 

 

2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz

 

 

 

(Country-specific restrictions apply):
2.4 to 2.4835GHz, 5.150 to 5.875GHz

 

 

 

Antennas

 

 

 

AP-224: Three RP-SMA connectors for external dual-band antennas
AP-225: Six integrated down-tilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz.
Built-in antennas are optimized for horizontal ceiling mounted orientation of AP-225

 

 

 

2.4GHz: Two internal omni-directional antennas for 2x2 MIMO with maximum antenna gain of 5.5dBi
5GHz: Three internal omni-directional antennas for 3x3 MIMO with maximum antenna gain of 5.0dBi
Antennas are optimized for vertical orientation of the device

 

 

 

W-AP134: three RP-SMA for external
dual-band antennas
W-AP135: six internal
omni-directional, dual-band

 

 

 

10/100/1000BASE-T Ethernet network interface (RJ-45)
Auto-sensing link speed and MDI/MDX
802.3az Energy Efficient Ethernet (EEE)
PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+

 

 

 

RAP-108: Two RP-SMA connectors
for external dual-band antennas
RAP-109: Four integrated omni- directional antennas for 2x2 MIMO with maximum antenna gain of 5.0 dBi in both 2.4 and 5 GHz. Built-in antennas are optimized for vertical orientation

 

 

 

Network interfaces

 

 

 

Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
Auto-sensing link speed and MDI/MDX
Load balancing statement TBD
MACSec encryption and 802.3az EEE

 

 

 

ENET0 (uplink): One 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
ENET1-4 (local): Four 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
ENET1 & ENET2 capable of sourcing POE power

 

 

 

Two 100/1000Base-T Ethernet Auto- sensing MDI/MDX. Supports MACSec Encryption, 802.3az

 

 

 

DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
USB 2.0 host interface (Type A connector)
Serial console interface (RJ-45, TTL levels)

 

 

 

ENET0 (uplink): One
10/100/1000Base-T Ethernet (RJ-45),
auto-sensing link speed and MDI/
MDX
ENET1 (local): One 10/100Base-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX

 

 

 

Other interfaces

 

 

 

DC power interface, accepts 1.7/4.0mm center-positive circular
plug with 9.5mm length
USB 2.0 port (Type A connector)
Serial console interface (RJ45, TTL levels)

 

 

 

DC power interface:
12V dc +/- 5%

 

 

 

Console interface (RJ45)

 

 

 

Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source

 

 

 

One USB 2.0 port (Type A connector
One serial console interface (RJ-45)

 

 

 

Power over Ethernet (PoE) interfaces

 

 

 

POE-PD: 48 Vdc 802.3af POE or 802.3at POE+

 

 

 

802.3af or 802.3at power sourcing support (PSE) provided on two local Ethernet ports (ENET1, 2)
Device capable of supplying 1x full 802.3at power or 2x full 802.3af power

 

 

 

48V DC 802.3af or 802.3at or PoE+ interoperable with intellisource PSE sourcing intelligence (both ports)

 

 

 

Power sources sold separately
Direct DC source: 12 Vdc nominal, +/- 5%

 

 

 

802.3af (PoE) or 802.3at (PoE+) on uplink Ethernet port Note: When using PoE, the USB port will be enabled only when an
802.3at-compliant source is used

 

 

 

Power interfaces

 

 

 

Direct DC source: 12 Vdc nominal, +/- 5%
Power over Ethernet (POE): 48 Vdc (nominal) 802.3af or 802.3at
compliant source

 

 

 

W-IAP155: 12Vdc from external AC-to-DC power adapter
W-IAP155P: 54Vdc from external AC-to-DC power adapter

 

 

 

12V DC, 1.25A

 

 

 

Maximum power consumption: 13 watts, plus up to 2.5 watts for attached USB device.

 

 

 

One port for DC power connector
(DC Input from AC power adapter or
POE only)

 

 

 

Power consumption

 

 

 

15W, plus up to 2.5W for attached
USB device.

 

 

 

Without USB device connected: 17.5 W
With USB device: 20 W
When sourcing POE power (W-IAP155P only),total power consumption may increase by up to 34W

 

 

 

15 Watts (maximum)

 

 

 

Indoor

 

 

 

Without USB device connected: 12.5
watt
With USB device: 15 watts

 

 

 

Environmental Class

 

 

 

Indoor

 

 

 

Indoor

 

 

 

Indoor, plenum-rated

 

 

 

Operating:
­ Temperature: 0° C to +50° C (+32° F to +122° F)
­ Humidity: 5% to 95% non-condensing

 

 

 

Indoor

 

 

 

Operating temperature

 

 

 

Temperature: 0° C to +50° C (+32° F to +122° F)
Humidity: 5% to 95% non-condensing

 

 

 

Temperature: 0° C to +40° C (+32° F to +104° F)
Humidity: 5% to 95% non-condensing

 

 

 

0°C to 50°C (32°F to 122°F)

 

 

 

0°C to 50°C (32°F to 122°F)

 

 

 

Temperature: 0° C to 40°C (32°F to
104°F)
Humidity: 5% to 95% non-condensing

 

 

 


Regulatory Information:

Product Safety, EMC and Environmental Data Sheets
Dell Regulatory Compliance Home Page
Dell and the Environment 

Models

W-IAP175AC and W-IAP175P

W-IAP104 and W-IAP105

W-IAP92 and W-IAP93

W-AP93H+

W-IAP3WN and
W-IAP3WNP

Data rate

600Mbps (300Mbps each radio)

600Mbps (300Mbps each radio)

300Mbps

300Mbps

300Mbps

Radios

Dual radios: 2.4 and 5GHz band

Dual radios: 2.4 and 5GHz band

Single radio: 2.4 or 5GHz band

Single radio: 2.4 or 5GHz band

Single radio: 2.4 or 5GHz band

Operating frequencies

N/A

N/A

2.4-2.5 GHz

2.4-2.5 GHz

2.4-2.5 GHz

Antennas

Four N-type interfaces (two per band) for external 2.4 and 5GHz antennas

W-AP104: four RP-SMA for
external 2.4 and 5GHz antennas
W-AP105: four internal
omni-directional, dual-band

W-AP92: two RP-SMA for
W-AP93 two internal
omni-directional, dual-band

Two internal omni-directional,
dual-band antennas

Both models have two internal
omni-directional, dual-band antennas.

Network interfaces

One 100/1000Base-T Ethernet, auto- sensing MDI/MDX

One 10/100/1000Base-T Ethernet, Auto-sensing MDI/MDX

One 10/100/1000Base-T Ethernet, auto-sensing MDI/MDX

One 10/100/100/1000Base-T Ethernet, auto-sensing MDI/MDX,
Four 10/100Base-T, and One passive
RJ-45 pass-through interface (2 ports)

Three RJ45 ports 10/100Base-T Ethernet, Auto-sensing MDI/MDX and one USB port for connecting a cellular modem

Other interfaces

Console interface (USB)

Console interface (RJ45)

Console interface (RJ45)

Console interface (RJ45)

Console interface (custom)

Power over Ethernet (PoE) interfaces

W-AP175P:
802.3at-compatible PoE input (PD)
W-AP175AC and W-AP175DC: 802.3af
compatible PoE output (PSE)

W-AP175P:
802.3at-compatible PoE input (PD)
W-AP175AC and W-AP175DC: 802.3af
compatible PoE output (PSE)

48V DC 802.3af-compatible

48V DC 802.3af-compatible

W-IAP3WN: 802.3af PoE (15.4W)
on the E2 port

Power interfaces

12–48V DC or 100–240V AC

48V DC 802.3af-compatible

12V DC, 1.25A

12V DC, 1.25A

W-IAP3WN: 12V DC, 1.25A
W-IAP3WNP: 48V DC, 0.75A
W-IAP3WN: 100–240V, 0.5A
W-IAP3WNP: 100–240V, 0.75A

Power consumption

18 Watts (maximum)

12V DC, 1.25A
12.5 Watts (maximum)

10 Watts (maximum)

9 Watts (maximum)

W-IAP3WN: 4 watts/6.5 watts
W-IAP3WNP: 5.5, 8, or 26 watts

Environmental Class

Outdoor

Indoor, plenum-rated

Indoor, plenum-rated

Indoor

Indoor

Operating temperature

W-IAP175P: –30°C to +60°C (–22°F
to +140°F)
W-IAP175AC and W-IAP175DC:
–40°C to +55°C (–40°F to 131°F)

0°C to 50°C (32°F to 122°F)

0°C to 50°C (32°F to 122°F)

0°C to 40°C (32°F to 104°F)

0°C to +40°C (32°F to 104°F)


Regulatory Information:
Product Safety, EMC and Environmental Data Sheets
Dell Regulatory Compliance Home Page
Dell and the Environment 
Deploy with ease
Deploy with ease
Be up and running in minutes, provisioning your W-Series Instant Access Points (IAPs) in a few easy steps using virtually any laptop’s wireless connection. W-Series IAPs are designed to provide enterprise-class networking services without enterprise-size complexity and include an expanded wired + wireless IAP portfolio with high-end wireless features for hotspots and remote branches.

Protect your investment
As WLAN requirements grow, configuration settings can be used to easily convert the W-Series IAPs to campus APs that work with a centralized-controller architecture.
Enterprise-grade WiFi network
Combine enterprise capabilities with entry-level simplicity using WiFi network through W-Series IAPs with built-in virtual controllers. When multiple IAPs are connected, a single IAP acts as a primary virtual controller. If that controller fails, another W-Series IAP in the chain automatically takes over as the primary virtual controller without disrupting services. To expand your network, just add more W-Series IAPs. Configuration is automatically uploaded from the primary virtual controller.

The virtual controller technology is able to monitor and control critical network maintenance tasks, including:
  • Specialized Adaptive Radio Management functions that optimize WiFi client behavior, enabling IAPs to avoid RF interference
  • Auto-configuration for added IAPs
  • 802.1x authentication
  • Role- and device-based policy enforcement
  • Rogue detection
Wired + wireless instant or remote AP
Several W-Series IAP models provide both wired and wireless connectivity, ideal for small branches or teleworkers. The wired connectivity includes additional Ethernet ports to connect wired devices as well as a USB port to connect a 3G/4G modem for internet connectivity.
Confidently manage your WiFi networks
Confidently manage your WiFi networks
Securely manage and administer a W-Series IAP WiFi network from a single built-in web-based GUI.

Manage multiple W-Series IAP WiFi networks using Dell W-Series AirWave Software Management Suite (AWMS). AirWave manages local or geographically dispersed deployments and aggregates them into one console. It gives you a single, accurate picture of everything that affects service quality for your users — from the wired infrastructure to the RF environment to individual mobile devices.
Enhance RF management
Build wireless networks that adjust to how WiFi clients interact. W-Series IAPs with Dell Adaptive Radio Management (ARM) technology help ensure that data, voice and video applications have sufficient network resources to operate properly, allowing maximum client performance while enhancing stability and predictability of the entire WiFi network. ARM features include:
  • Spectrum load balancing that uniformly distributes clients across channels in high-density environments
  • Noise awareness that dynamically shifts clients away from channels hampered by outside interference
  • Band steering that enables IAPs with both radios available to dynamically transfer clients away from crowded bands and allows users to define client ratios across different bands
  • Airtime fairness that delivers equal airtime access to all WiFi clients, regardless of the client type, wireless chip or operating system
Global Support and Deployment Services
Global Support and Deployment Services
Reduce IT complexity, maximize uptime and help lower costs with Dell Services. These pre- and post-deployment network services include:

• Pre-sales assessment
• Virtual site planning session
• On-site WLAN survey
• WLAN Controller Install
• Remote Advisory Services
• Airwave Management Install
• Product Extended Life Limited Hardware Warranty*
• Dell ProSupport* Services
 W-Series IAP224/225 802.11ac Access Points
W-Series IAP224/225 802.11ac Access Points

W-Series IAP224 (external antenna) and W-Series IAP225 (internal antenna) are 802.11ac access points, supporting the new 5GHz industry standard for gigabit wireless data rates. These purpose-built 3x3 MIMO 802.11ac access points are designed to deliver blazing fast performance that is up to three times higher than comparable 802.11n access points. Dual-radio configurations enable flexible deployments:

 

  • 5GHz: 3x3 MIMO for 802.11ac, delivering data rates up to 1.3Gbps 
  • 2.4GHz: 3x3 MIMO for 802.11n, delivering data rates up to 450Mbps 

 

The IAP224 and IAP225 each include dual GbE ports to access wired backbones and are powered by Power-over-Ethernet 802.3at (PoE+) or an optional adapter.

 W-Series IAP155/155P Wired + Wireless Instant Access Points

 

W-Series IAP155/155P Wired + Wireless Instant Access Points

Dual-band, dual-radio IAPs offering wire-like data rates of up to 450Mbps per radio with instant or remote AP-mode options. The IAP155 and IAP155P each have four ports available to the wired network and a USB port to connect to 3G and 4G networks. The W-Series IAP155P has two Power-over-Ethernet (PoE)-capable LAN ports that can be used to power an external PoE-enabled device, such as an IP phone.

 

  • Dual-radio, concurrent dual-band access points
  • 2x2 MIMO with two spatial streams and up to 300Mbps wireless data rate in 2.4GHz
  • 3x3 MIMO with three spatial streams and up to 450Mbps wireless data rate in 5GHz

W-Series IAP134/135 Instant Access Points W-Series IAP134/135 Instant Access Points

Enterprise-grade W-Series IAP134 (external antenna) and IAP135 (internal antennas) are the highest-performing W-Series 802.11n dual-radio indoor access points, designed to deliver data rates of up to 450Mbps per radio, up to 900Mbps total for denser environments.
 W-Series IAP114/115 Instant Access PointsW-Series IAP114/115 Instant Access Points

W-Series IAP114 (external antenna) and IAP115 (internal antennas) high-performance, dual-radio 802.11n access points designed to deliver data rates up to 450Mbps per radio, suited for medium-density deployments.
 W-Series IAP 108/109 Wired + Wireless Instant Access Points

 

W-Series IAP 108/109 Wired + Wireless Instant Access Points

Multifunctional dual-radio W-Series IAP 108 (connecters for external antenna) and W-Series IAP 109 (four integrated antennas) are 802.11abgn, 2x2:2 MIMO access points with instant or remote AP modes for wireless and wired networking in large deployments. With 300Mbps wireless data rate per radio, each IAP features:

 

  • 10/100/1000BASE-T uplink port
  • 10/100BASE-T local port
  • USB port to connect to 3G and 4G networks
  • Desktop form factor with optional wall/ceiling-mount support
 W-Series IAP104/105 Instant Access Points

W-Series IAP104/105 Instant Access Points

W-Series IAP104 (external antenna) and W-Series IAP105 (internal antenna) are enterprise-grade dual-radio 802.11n indoor access points designed to deliver data rates of up to 300Mbps per radio, up to 600Mbps total for medium density deployments.

 

 W-Series IAP175 Outdoor Instant Access PointsW-Series IAP175 Outdoor Instant Access Points

Enterprise-grade family of mainstream dual-radio 802.11n outdoor access points designed to deliver data rates of up to 300Mbps per radio, up to 600Mbps total. Ideal for campuses, industrial parks and other harsh, outdoor open-air environments, W-Series IAP175 instant access points can be powered via PoE, AC or DC power sources and include convenient wall and mast mounting options as well as a solar shield.
 W-Series IAP92/93 Instant Access PointsW-Series IAP92/93 Instant Access Points

W-Series IAP92 (external antenna) and W-Series IAP93 (internal antenna) are entry-level, enterprise-grade, single-radio 802.11n indoor access points designed to deliver data rates of up to 300Mbps.
 W-Series IAP3WN/IAP3WNP Wired + Wireless Instant Access PointsW-Series IAP3WN/IAP3WNP Wired + Wireless Instant Access Points

Enterprise-grade portable or desktop 802.11n indoor access points that offer data rates of up to 300Mbps.

W-Series IAP3WN features:
  • Two 10/100Mbps LAN ports
  • One 10/100/1000Mbps WAN port
  • One USB port to connect to external cellular modem

W-Series IAP3WNP has one PoE-capable LAN port that can be used to power an external PoE-enabled device, such as an IP phone.

close
 
 
CS01