Dell PowerEdge M610
Next-generation half-height blade server featuring Intel® Xeon® processor architecture
- Enhanced memory capacity
- Great virtualization and database performance
- Designed for increased energy efficiency
- Intel® Xeon® processor 5500 and 5600 series
Six-core Intel® Xeon®
Quad-core Intel® Xeon®
Operating System (Dell recommends Windows 10 Pro.)
- Microsoft® Windows Server® 2012.
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2008 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008 R2 SP1, x64 (includes Hyper-V v2)
Microsoft Windows® HPC Server 2008
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux®
Microsoft Hyper-V through Microsoft Windows Server 2008
VMware® vSphere® ESX™ and ESXi™
Red Hat Enterprise Virtualization®
- Intel® 5520
- Up to 192GB (12 DIMM slots): 1GB/2GB/4GB/8GB/16GB ECC DDR3
Up to 1333MHz
Embedded Hypervisor (Optional)
- Citrix® XenServer®
Microsoft® Windows Server® 2008, with Hyper-V™
VMware® vSphere™ 4.1 (including VMware ESX® 4.1 or VMware ESXi™ 4.1)
- Hot-plug Hard Drive Options:
2.5" SAS SSD, SATA SSD, SAS (15K, 10K), nearline SAS (7.2K), SATA (7.2K)
- Hot-Swap options available:
Up to two 2.5" SAS or SSD drives
I/O Mezzanine Card Options
Fully populated mezzanine card slots and switch modules will yield 3 highly available, redundant I/O fabrics for each blade.
1Gb and 10Gb Ethernet:
Broadcom® Dual-Port 1Gb Ethernet with TOE (BCM-5709S)
Intel Quad-Port 1Gb Ethernet
Broadcom Quad-Port 1Gb Ethernet (BCM-5709S)
Broadcom Dual-Port 10Gb Ethernet (BCM-57711)
10Gb Enhanced Ethernet and Converged Network Adapters (CEE/DCB):
Intel Dual-Port 10GB Enhanced Ethernet Server Adapter X520-DA2 (FcoE ready for future enablement)
QLogic® Dual-Port CNA (QME8142) (supports CEE/DCB 10GbE + FCoE)
QLogic Dual-Port CNA (QME8242-k) (supports 10GbE + NPAR)
Brocade® BR1741M-k Dual-Port Mezzanine CNA
QLogic Dual-Port FC8 Fibre Channel Host Bus Adapter (HBA) (QME2572)
Emulex® Dual-Port FC8 Fibre Channel HBA (LPe1205-M)
Emulex 8 or 4 Gb/s Fibre Channel Pass-Through Module
Mellanox® ConnectX® Dual-Port Quad Data Rate (QDR) InfiniBand
Mellanox ConnectX Dual-Port Dual Data Rate (DDR) InfiniBand
PERC H200 Modular (6Gb/s)
PERC H700 Modular (6Gb/s) with 512MB battery-backed cache
SAS 6/iR Modular
CERC 6/i Modular
PERC 6/i Modular with 256MB battery-backed cache
- Two embedded Broadcom® NetXtreme II™ 5709 Gigabit Ethernet NICs with failover and load balancing TOE (TCPIP Offload Engine) supported on Microsoft® Windows Server 2003, SP1 or higher with Scalable Networking Pack. iSCSI Offload supported on Microsoft Windows Server 2008, Microsoft Windows Server 2003 SP1 or higher, Red Hat® Linux® Enterprise 5, and SUSE LINUX Enterprise Server 10. Scalable Networking Pack for Microsoft Windows Server 2003 is not required.
Boot from SAN (iSCSI and FC) supported
Optional add-in NICs:
Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement)
See I/O Mezzanine Card Options
Intel® Gigabit ET Dual Port Server Adapter
Intel® Gigabit ET Quad Port Server Adapter
Brocade® BR1741M-k Dual-Port Mezzanine CNA
Emulex® 8 or 4 Gb/s Fibre Channel Pass-Through Module
Optional add in HBAs:
See I/O Mezzanine Card Options
Fully populated mezz card slots and switch modules will yield 3 highly available, redundant I/O fabrics for each blade.
- Supplied by Dell’s M1000e Blade Chassis
- Matrox G200
- The PowerEdge M610 blade server fits in the M1000e blade enclosure. A total of 8 full-height or 16 half-height blades can fit into every M1000e enclosure. Full height and half height blades can be mixed in M1000e enclosures with no limitations.
M610 Dimensions and Weight (blade only):
Height: 18.9 cm (7.4 in)
Width: 5 cm (2 in)
Depth: 48.6 cm (19.2 in)
Weight (Maximum Configuration): 5.2-6.4 kg (11.5-14.0 lb)
Full height blade fits inside the M1000e Blade Enclosure
Maximum of 8 per blade chassis
Dell™ OpenManage™ featuring Dell Management Console
Unified Server Configurator Lifecycle Controller
BMC, IPMI2.0 compliant
iDRAC6 Enterprise with optional vFlash
Remote Management: iDRAC6 Enterprise with optional vFlash
The Dell OpenManage systems management portfolio, including Dell PowerEdge server embedded management feature integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller, helps IT Administrators efficiently manage Dell servers in physical, virtual, local and remote environments, operating in band or out of band, with or without a systems management software agent. Irrespective of the operating system or hypervisor you deploy, iDRAC with Lifecycle Controller automates the most essential and frequently performed server management tasks to help your IT resources become more productive and your IT environment more cost-effective and well-maintained. Dell OpenManage also integrates and connects to leading third-party systems management solutions you may already own, so you can maintain your single point of control and capitalize on your existing investment.
Solutions and Systems Management
Dell Desktop Virtualization Solutions
With Dell Compellent, Dell EqualLogic and Dell PowerVault, we have created a comprehensive and innovative portfolio of storage products, all of which are easy to deploy, manage and grow. Whether you use network attached storage (NAS), direct attached storage (DAS), internet SCSI (iSCSI) or Fibre Channel (FC), Dell has a product that can meet your business needs and reduce the cost and complexity of storage.
|The Value of Dell Storage: |
Dell’s open, standards-based solutions let customers of all sizes integrate new technologies without sacrificing performance or their existing IT investments.
|Direct-Attached Storage: |
The Dell PowerVault MD storage family offers easy and economical expansion for Dell PowerEdge servers enabling high availability and scalability for demanding business applications.
|Disk-to-Disk Backup |
Due to expanding volumes of data that must be backed up and protected along with shrinking backup windows, many IT departments have moved to or added disk-based backups.
NAS is a specialized storage server with its own IP address that is made available to multiple clients and servers on a local area network (LAN) or wide area network (WAN).
|Object-Based Storage |
The Dell DX Object Storage Platform is designed to intelligently access, store, protect and distribute fixed digital content.
Storage Area Network
A storage area network (SAN) is a network of shared storage devices, such as disk storage arrays and tape automation
Considered the first and last line of defense against data loss, tape and removable disks can be used for long-term data storage and backup.
Unified Storage is a term that describes the ability to manage both file- and block-level data.
Designed for Power EfficiencyThe Dell™ PowerEdge™ M1000e blade enclosure with the M610 delivers exceptional performance per watt. The M1000e enclosure takes advantage of thermal design efficiencies, such as ultraefficient power supplies, dynamic power-efficient fans and optimized airflow design that can efficiently cool the chassis to enable exceptional performance in a lower power envelope.
The Intel® Xeon® processor series is designed to adapt in real time to your software, enabling multiple tasks to be done simultaneously while boosting performance with Intel® Turbo Boost Technology as business usage demands it most. It proactively puts your server into lower power states using Intel® Intelligent Power Technology during periods of low demand, helping reduce operating costs.
This dynamic power management technology allows you to set high/low power thresholds to enable efficient energy management.
Increased Memory Capacity for I/O Intensive ApplicationsThe M610 is designed with 50 percent more memory capacity than the previous generation M600, a critical component to virtualization and database performance.
New Double Data Rate 3 (DDR3) memory offers higher bandwidth and lower power consumption than previous FBD or Double Data Rate 2 (DDR2) RAM technologies. The increased memory slots allow you to use smaller, less expensive dual in-line memory modules (DIMMs) that meet your computing needs and increase your savings.
Virtualization PerformanceThe Dell™ PowerEdge™ M610 allows for quick virtualization deployment with embedded hypervisors from world-class vendors using a Secure Digital (SD) card or internal USB. Intel® VT FlexMigration integrates multiple generations of Intel® Xeon® processor-based servers, improving flexibility and investment protection. The M610’s enhanced memory capacity is crucial for virtualization performance while lower-cost memory configurations can help balance cost.
Simplified Systems ManagementThe next generation Dell OpenManage™ suite offers enhanced operations and standards-based commands designed to integrate with existing systems for effective control.
The new Dell Management Console, powered by Altiris from Symantec, delivers a single view and a common data source into the entire infrastructure. Dell Management Console is built on the Symantec™ Management Platform (formerly Altiris® Notification Server), an easily extensible, modular foundation that can provide basic hardware management or more advanced functions such as asset and security management. Dell Management Console helps reduce or eliminate manual processes so less time and money is spent keeping the lights on and more time can be spent on strategic uses of technology.
Lifecycle Controller is the engine for advanced systems management integrated on the server. Lifecycle Controller simplifies administrator tasks to perform a complete set of provisioning functions such as system deployment, system updates, hardware configuration and diagnostics from a single intuitive interface called Unified Server Configurator (USC) in a pre-OS environment. This eliminates the need to use and maintain multiple pieces of disparate CD/DVD media.
The Dell Unified Server Configurator delivers a single access point for secure, efficient and user-friendly infrastructure management. Embedded and integrated into the system, it provides quick and consistent access, excellent flexibility and advanced capabilities. With built-in driver installations, firmware updates, hardware configuration and diagnostics, the USC tool is a one-stop shop for operating system deployment.
Flexibility RedefinedOnly Dell M-Series provides complete, snap-in FlexIO scalability down to the switch interconnects. FlexIO technology is the foundation of the M1000e I/O subsystem that has the flexibility you need to design today’s solution and the scalability you require to add or change data center options to meet future demands.
Dell's fully modular Ethernet switches provide great flexibility, with choices of 1Gb to 10Gb speeds, flexible modular uplinks of varying media types, and many other valuable features. This portfolio offers a selection of switches that can meet even the most extreme networking demands.
Brocade 16Gb Fibre Channel Switches provide powerful connectivity to Fibre Channel SANs, such as those offered by Dell/EMC. The M6505 includes 16 internal and 8 external fabric port options as well as a performance pack for enhanced features and management.
For heterogeneous integration into any Fibre Channel network, the Brocade M5424 8Gb Fibre Channel switch can even be enabled in Access Gateway mode. Based on N_Port ID Virtualization (NPIV) functionality, Access Gateway mode delivers the cable aggregation benefits and cost savings offered by Dell’s M-Series blade solutions without separate management or configuration requirements.
For high-performance computing (HPC) or other environments requiring the highest bandwidth and lowest latency available, the M-Series offers InfiniBand™ switches and adapter cards. Dell offers chassis-integrated fourteen data rate (FDR) InfiniBand switches from Mellanox, with speeds of up to 56Gbps. Each switch features 16 internal ports and 8 external ports to ensure the availability and redundancy needed for the most demanding applications.
FlexIO for M-Series: Delivering the speed you need, when you need it.
Dell ProSupport offers a suite of support services that enable you to choose support models based on how you use technology and where you want to allocate resources. We recommend Dell ProSupport Plus withSupportAssist for mission-critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. For hyper-scale data centers, we also offer ProSupport Flex for Data Center. Contact your Dell representative today for more information*.
Dell Enterprise Deployment Services
ProDeploy Enterprise Suite* offers a full range of deployment services and professional certifications to help you get more out of your technology starting on day one. Choose ProDeploy Plus for the most complete deployment offer available in the market, ProDeploy for expert configuration and installations, or Basic Deployment for worry-free hardware installations.
Dell Training Services
Dell Education Services offers PowerEdge Server training courses designed to help you achieve more with your hardware investment. The curriculum is designed in conjunction with the server development team, as well as Dell’s technical support team, to ensure that the training delivers the information and practical, hands-on skills you and your team need to confidently deploy, manage and maintain your Dell Server solution. To learn more or register for a class today, click here.