Designed for flexibility and performance
Accelerate the migration to higher performance with Dell Networking S-Series 1/10/40GbE switches.
|Switching fabric capacity||192 Gbps||176 Gbps|
|User traffic capacity||144 Mpps||132 Mpps|
|Link aggregation||8 links per group, 128 groups per stack||8 links per group, 128 groups per stack|
|Stacking capacity||48 Gbps per stack member||96 Gbps per stack member|
|Queues per port||4 queues||4 queues|
|VLANs with 4096 tag value support||1024||1024|
|Line-rate Layer 2 switching — All protocols, including IPv4 and IPv6||S||S|
|Line-rate Layer 3 routing — IPv4 and IPv6||S||S|
|LAG load balancing — Based on Layer 2, IPv4 or IPv6 headers||S||S|
|Switching latency||<5 µs for 64 byte frames||<9 µs for 64 byte frames|
|Packet buffer memory||4MB||1.25GB|
|IPv4 host table size||N/A||N/A|
|IPv6 host table size||N/A||N/A|
|IPv4 Multicast table size||N/A||N/A|
|Ring stacking topology with dynamic master election||S||S|
|Dual modular slots with up to four 10 GbE ports||S||S|
|Link aggregation across stack members||S||S|
|Built-in power redundancy||S||S|
|Hot swappable redundant AC or DC power||S||S|
|Hot swappable redundant fans||N||S|
|Line-rate ports||44 - 10/100/1000 Base-T ports||44 RJ45 10/100/1000 Base-T ports|
|1 RJ45 console/management port with RS232 signaling||S||S|
|1 RJ45 Ethernet management port||N||N|
|USB Ports||2 USB 2.0 ports (1 USB A, 1 USB B)||2 USB 2.0 ports (1 USB A, 1 USB B)|
|2 line-rate ports 10 Gigabit Ethernet XFP Modules||N||N|
|2 line-rate ports 10 Gigabit Ethernet CX4 Modules||N||N|
|2 line-rate ports 12 Gigabit Stacking Modules||S||N|
|2 line-rate ports 10 Gigabit Ethernet SFP+ Modules||S||S|
|1 line-rate port 24 Gigabit Stacking Modules||N||S|
|Size||1 RU, 1.7 h x 17.32 w x 18.06" d (4.3 h x 44 w x 45.87 cm d)||1 RU, 1.7 h x 17.32 w x 20.5" d (4.3 h x 44 w x 52.07 cm d)|
|Weight||14.39 lbs (6.54 kg)||14.39 lbs (6.54 kg)|
|ISO 7779 A-weighted sound pressure level||59.6 dBA at 73.4°F (23°C)||59.6 dBA at 73.4°F (23°C)|
|32° to 122°F (0° to 50°C)||S||S|
|10 to 85% (RH), noncondensing||S||S|
|–40° to 158°F (–40° to 70°C)||S||S|
|5 to 95% (RH), noncondensing||S||S|
|Power supply||100–240 VAC 50/60 Hz, –44 to -60 VDC||100–240 VAC 50/60 Hz, –44 to -60 VDC|
|Max. thermal output:||443 BTU/h||531 BTU/h|
|Max. current draw per system||2 A at 100/120 VAC, 1 A at 200/240 VAC, 3.6 A at -48 VDC||2 A at 100/120 VAC, 1 A at 200/240 VAC, 3.6 A at -48 VDC|
|Max. power consumption||130 W||N|
|Max. PoE power||N||N|
|Reliability||MTBF 169,315 hours||MTBF 169,315 hours|
|EN 60825-1 Safety of Laser Products Part 1: Equipment||S||S|
|EN 60825-2 Safety of Laser Products Part 2: Safety of||S||S|
|EN 60950-1, Second Edition||S||S|
|Equipment Classification Requirements and User's Guide||N||N|
|FDA Regulation 21 CFR 1040.10 and 1040.11||S||S|
|IEC 60950-1, Second Edition Including all National||S||S|
|Optical Fibre Communication Systems||N||N|
|UL/CSA 60950-1, Second Edition||S||S|
|Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A||S||S|
|Canada: ICES-003, Issue-4, Class A||S||S|
|Europe: EN 55022: 2006 (CISPR 22: 2006), Class A||S||S|
|Japan: VCCI V3/2007.04 Class A||S||S|
|USA: FCC CFR 47 Part 15, Subpart B, Class A||S||S|
|EN 300 386 V1.3.3: 2005 EMC for Network Equipment||S||S|
|EN 55024: 1998 + A1: 2001 + A2: 2003||S||S|
|EN 61000-3-2: Harmonic Current Emissions||S||S|
|EN 61000-3-3:Voltage Fluctuations and Flicker||S||S|
|EN 61000-4-2: ESD||S||S|
|EN 61000-4-3: Radiated Immunity||S||S|
|EN 61000-4-4: EFT||S||S|
|EN 61000-4-5: Surge||S||S|
|EN 61000-4-6: Low Frequency Conducted Immunity||S||S|
|All S Series components are EU RoHS compliant.||S||S|
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home Page
Dell and the Environment
|IPv6 routes||8K (shared CAM space with IPv4)||8K (shared CAM space with IPv4)||8K (shared CAM space with IPv4)||8K (shared CAM space with IPv4)|
|Switching fabric capacity||1.28 Tbps (full-duplex)|
640 Gbps (half-duplex)
|1.28 Tbps (full-duplex)|
640 Gbps (half-duplex)
|1.28 Tbps (full-duplex)|
640 Gbps (half-duplex)
|2.56 Tbps (full-duplex)|
1.28 Tbps (half-duplex)
|User traffic capacity||960 Mpps||960 Mpps||960 Mpps||1462 Mpps|
|Link aggregation||8 links per group, 128 groups per stack||8 links per group, 128 groups per stack||8 links per group, 128 groups per stack||8 links per group, 128 groups per stack|
|Queues per port||4 queues||4 queues||4 queues||8 queues|
|Line-rate Layer 2 switching — All protocols, including IPv4 and IPv6||S||S||S||S|
|Line-rate Layer 3 routing — IPv4 and IPv6||S||S||S||S|
|LAG load balancing — Based on Layer 2, IPv4 or IPv6 headers||S||S||S||S|
|Packet buffer memory||9MB||9MB||9MB||12MB|
|IPv4 host table size||4,000||8,000||8,000||48,000|
|IPv6 host table size||4,000||8,000||8,000||32,000|
|IPv4 Multicast table size||4,000||8,000||8,000||64,000|
|Ring stacking topology with dynamic master election||S||S||S||N|
|Dual modular slots with up to four 10 GbE ports||S||S||S||N|
|Link aggregation across stack members||S||S||S||S|
|Built-in power redundancy||S||S||S||S|
|Hot swappable redundant AC or DC power||S||S||S||S|
|Hot swappable redundant fans||S||S||S||S|
|Line-rate ports||48 - 10 Gigabit Ethernet SFP+ ports||48 - 10 GBASE-T ports||48 - 10 Gigabit Ethernet SFP+ ports & FC/FCoE ports||32 ports of 40GbE or in breakout mode, 104x10GbE or 96x10GbE and 8x40GbE|
|SFP Ports||4 - 40 Gigabit Ethernet QSFP+ ports||4 - 40 Gigabit Ethernet QSFP+ ports||4 - 40 Gigabit Ethernet QSFP+ ports||32 - 40 Gigabit Ethernet QSFP+ ports|
|1 RJ45 console/management port with RS232 signaling||S||S||S||S|
|1 RJ45 Ethernet management port||N||N||N||S|
|2 line-rate ports 10 Gigabit Ethernet XFP Modules||N||N||N||N|
|2 line-rate ports 10 Gigabit Ethernet CX4 Modules||N||N||N||N|
|2 line-rate ports 12 Gigabit Stacking Modules||N||N||N||N|
|2 line-rate ports 10 Gigabit Ethernet SFP+ Modules||N||N||N||N|
|1 line-rate port 24 Gigabit Stacking Modules||N||N||N||N|
|Size||1 RU, 1.73 h x 17.32 w x 18.11" d (4.4 h x 44 w x 46 cm d)||1 RU, 1.71 h x 17.09 w x 18.11" d (4.35 h x 43.4 w x 46 cm d)||1RU, 1.73 h x 17.32 w x 28" d (4.4 h x 44 w x 46 cm d)||RU, 1.73 h x 17.32 w x 18.11" d (4.39 h x 43.99 w x 46 cm d)|
|Weight||14.39 lbs (6.54 kg)||21.7 lbs (9.86 kg)||34 lb (15.42 kg)||14.41 lbs (6.54 kg)|
|ISO 7779 A-weighted sound pressure level||59.6 dBA at 73.4°F (23°C)||65 dBA at 78.8°F (26°C)||59.6 dBA at 73.4°F (23°C)||20 dBA at 73.4°F (23°C)|
32° to 122°F (0° to 50°C)
|32° to 104°F (0° to 40°C)||32° to 113°F (0° to 45°C)||32° to 104°F (0° to 40°C)||32° to 113°F (0° to 45°C)|
10 to 85% (RH), noncondensing
|10 to 85% (RH), noncondensing||10 to 90% (RH), noncondensing||10 to 85% (RH), noncondensing||10 to 90% (RH), noncondensing|
–40° to 158°F (–40° to 70°C)
5 to 95% (RH), noncondensing
|Power supply||100–240 VAC 50/60 Hz||100–240 VAC 50/60 Hz||100–240 VAC 50/60 Hz|
-48 to -60 VDC
|100–240 VAC 50/60 Hz|
|Max. thermal output:||955.36 BTU/h||1433 BTU/h||1878 BTU/h||1265.9 BTU/h|
|Max. current draw per system||2 A at 100/120 VAC, 1 A at 200/240 VAC||4.2A at 100/120VAC, 2.1A at 200/240VAC, 1.04A at 40.5VDC, 7A at 60VDC||7A at 100/120VAC, 3.5A at 200/240VAC, 15.2A at -46VDC, 11.7A at -60VDC||3.8A at 100/120 VAC, 1.6A at 200/240 VAC|
|Max. power consumption||350 Watts||460 Watts||550 Watts||371 Watts|
|Max. PoE power||N||N||N||N|
|EN 60825-1 Safety of Laser Products Part 1: Equipment||S||S||S||S|
|EN 60825-2 Safety of Laser Products Part 2: Safety of||S||S||S||S|
|EN 60950-1, Second Edition||S||S||S||S|
|Equipment Classification Requirements and User's Guide||S||S||S||S|
|FDA Regulation 21 CFR 1040.10 and 1040.11||S||S||S||S|
|IEC 60950-1, Second Edition Including all National||S||S||S||S|
|Optical Fibre Communication Systems||S||S||S||S|
|UL/CSA 60950-1, Second Edition||S||S||S||S|
|Australia/New Zealand: AS/NZS CISPR 22: 2009, Class A||S||S||S||S|
|Canada: ICES-003, Issue-4, Class A||S||S||S||S|
|Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A||S||S||S||S|
|Japan: VCCI V3/2009 Class A||S||S||S||S|
|USA: FCC CFR 47 Part 15, Subpart B:2009, Class A||S||S||S||S|
|EN 300 386 V1.4.1: 2008 EMC for Network Equipment||S||S||S||S|
|EN 55024: 1998 + A1: 2001 + A2: 2003||S||S||S||S|
|EN 61000-3-2: Harmonic Current Emissions||S||S||S||S|
|EN 61000-3-3:Voltage Fluctuations and Flicker||S||S||S||S|
|EN 61000-4-2: ESD||S||S||S||S|
|EN 61000-4-3: Radiated Immunity||S||S||S||S|
|EN 61000-4-4: EFT||S||S||S||S|
|EN 61000-4-5: Surge||S||S||S||S|
|EN 61000-4-6: Low Frequency Conducted Immunity||S||S||S||S|
|All S Series components are EU RoHS compliant.||S||S||S||S|
Product Safety, EMC and Environmental Datasheets (in English)
Dell Regulatory Compliance Home Page (in English)
Dell and the Environment (in English)
Designed for performanceDell Networking switching technology enables outstanding productivity for virtualized data center and cloud computing environments. The wide range of S-Series switches includes the S6000 10/40G high-density top-of-rack (ToR) switch, a compact 1RU fixed switch with full L2/L3 capability, including Data Center Bridging (DCB) and Virtual Link Trunking (VLT).
- Added flexibility to configure 32 x 40GbE ports or 96 x 10GbE plus 8 x 40GbE ports
- Low latency with superb performance and high density with hardware and software redundancy
- DCB for reliable, high-performance Ethernet in large data center networks
- Streamlined connectivity and workflow operation across physical and virtual resources with multi-tenancy capabilities
- Support for Network Virtualization with VXLAN Gateway hardware support integrated into the switch
- Integrated automation, scripting and programmatic management for enhanced network flexibility in virtualized environments
Developed for flexibilityThe Dell Networking S-Series switches offer a family of products that enable you to find the ideal solution for your specific needs.
- Deliver versatility with line-rate performance and port densities from 48 x 1/10Gb Base T line-rate ports in the S4820T switches to 32 x 40GbE ports in the S6000
- Scale quickly with efficient stacking offered in many of the S-Series models, including S4810/S4820T/S5000 (10/40Gb) platforms
- Powered by our industry-hardened and feature-rich operating system for maximum dependability and uptime
- Full support for iSCSI storage area networks including support for DCB
The Open Automation Framework takes full advantage of Dell FTOS software capabilities to bring network automation into virtual data center environments. This helps the S-Series switches efficiently respond and adapt to changes in application requirements.
Networking Services and Support
Is your network complex and coiled? Dell can perform a detailed network evaluation to expose design flaws and give you advice on how to architect the future. Detailed report includes insight into connected devices, multi-device relationships, topologies of the network, and potential security threats. Contact Dell for more information.
Network running slow? Let Dell conduct an in-depth analysis to uncover network latency and performance issues of specific servers and applications. Detailed report and remediation plan provided at end of analysis. Contact Dell for more information.
Setting up network protocols, and policies can be tricky. Dell certified network professionals can configure and optimize your new hardware remotely or onsite. Dell can also interconnect existing network infrastructure from Cisco, HP, Juniper, and others. Let Dell seamlessly weave it all together. Add deployment services to your hardware purchase.
Are there times when you need a little extra technical guidance? Certified experts are available to discuss networking design or help you resolve issues pertaining to the wired or wireless network. Call Dell to speak with certified network consulting experts.
Choose Dell’s premium support service, Dell ProSupport*, for 24/7 direct telephone and online access to advanced-level technicians based in your region. Whether you have one office or hundreds around the world, protect your investments with this simple yet flexible approach.
The S6000 supports top-of-rack (ToR), middle-of-row (MoR) and end-of-row (EOR) connectivity to 10GbE servers and 40GbE fabrics for enterprise and midmarket implementations. The 1U S6000 enables streamlined connectivity and workflow operation with low latency operation and includes support for Network Virtualization with VXLAN Gateway hardware built-in. Virtual Link Trunking (VLT) helps eliminate spanning tree protocol (STP)-blocked ports and provides fast convergence if a link or device fails
Dell Networking S5000 10/40G Unified Storage Switch
The S5000 enables converging LAN and SAN traffic in a single 1U top-of-rack switch. It features a unique modular design to enable adding Ethernet and Fibre Channel/FcoE modules when needed, and DCB support for lossless Ethernet. In addition, the S5000 helps standardize and simplify the Dell Active System Infrastructure pre-integrated systems.
Dell Networking S4820T 10G Base T Switch
Deploy 1/10GbE for 10G copper terminations to server with the S4820T 10G Base T switch. The high-density switch features 48 ports of 1/10GbE and four 40GbE uplinks in a 1U rack chassis. Powered by the Dell Networking Operating System (FTOS), it offers non-blocking, line-rate performance for top-of-rack storage solutions and Dell 12G rack servers as well as 12G blade servers with Dell Networking MXL switches.
Dell Networking S4810 High-Performance 10/40GbE Switch
Deliver low-latency throughput with the S4810. The 1/10/40GbE top-of-rack, aggregation or core switch features a 1.28 Tbps (full-duplex), non-blocking, cut-through switching fabric designed to deliver line-rate performance under full load with 800ns latency.
Dell Networking S60 High-Performance 1/10GbE Switch
Optimized to improve manageability at the network edge, the S60 is a stackable, 48-port GbE top-of-rack switch that delivers non-blocking, line-rate switching and routing with a 1.25GB deep-packet buffer to help eliminate congestion.
Dell Networking S55 High-Performance 1/10GbE Switch
Designed for high-performance data center applications, the S55 features a 176 Gbps switch fabric that supports line-rate, non-blocking switching with less than five microseconds of latency.
Network assessments offer a holistic view of your multivendor environment and a reference point for how your infrastructure is performing. Our experts can pinpoint and expose issues in your network using specialized software and diagnostic tools. These unbiased and insightful analytics are aggregated into comprehensive reports that can include recommendations on how to improve performance, optimize devices and remediate problems.
Is your network complex and coiled? Dell can perform a detailed audit and inventory of all multivendor devices in the network to provide visibility and identify configuration issues.
Network Optimization Assessment
Many networks are a multivendor patchwork of devices not running at their optimal state. We can analyze devices from all leading vendors and make recommendations to optimize the entire multivendor design, fine-tune devices and maximize performance of the holistic environment.
Application Performance Assessment
When business applications and databases begin to show signs of latency or completely shut down, we can conduct a comprehensive analysis to uncover performance issues, isolate problems and accelerate troubleshooting of the enterprise infrastructure and software applications.
Moving to a Voice-over-IP (VoIP) solution requires the right network infrastructure to support real-time voice protocols. Simulated load testing, analysis and review can identify the next steps to building a VoIP platform or fixing issues of an existing one.
Network Security Assessment
Safeguard your network from constant attack. Let our experts examine and uncover potential vulnerabilities and provide a comprehensive security design assessment.
Wireless Site Survey
Great wireless connectivity starts with a detailed site survey. Dell can analyze existing infrastructure, identify RF interference and recommend the best design and optimal placement of new devices.
The Dell standardized deployment service guarantees that setup and optimization are done correctly so that you can launch faster and focus on daily business.
Expert planning and execution seamlessly weaves Dell’s open systems architecture with existing network infrastructure from Cisco, HP, Juniper and others. Choose ProDeploy Plus, the most complete deployment offer on the market for complex environments.
Setting up network protocols, and policies can be tricky. Dell certified network engineers can configure and optimize your new hardware remotely or on-site and get new technology up and running fast .
Mounting and cabling of wired and wireless devices can be tedious and time-consuming. Get worry-free hardware installations with experienced Dell technicians who do deployments every day .
Dell offers a variety of on-site and remote support options that can be added at time of purchase. Dell ProSupport ensures problems are diagnosed and resolved by experts.
|On-site and Remote Assistance|
Get immediate access to Dell ProSupport professionals who can help you troubleshoot and diagnose issues that may arise in your network.
Free yourself to focus on the business and allow Dell to manage your network with dedicated professional support.
Learn practical knowledge and operational techniques.
Dell network consulting provides on-site or remote access to highly skilled professionals who provide project assistance and guidance across a variety of technologies for a specific project or timeframe.
Get professional insight with a half-day collaborative whiteboard session to discuss potential improvements.
For those times when you need a little extra technical guidance, certified experts are available to discuss system design or help resolve complex issues that can be billed by the day, week or by the phone call. Time-based consulting is as flexible as you are.
• Access Distribution Networking
• Gateway and Security
• Microsoft Exchange
• Wireless Networking
• Systems Management
• Core Layer/MPLS Networking
• Data Protection and Recovery
• Storage Area Networking (SAN)
• Storage Technologies