High availability and exceptional I/O capacity
The PowerEdge M805 is an AMD processor-based 2-socket, full-height blade server providing high-bandwidth and scalable memory capacity for virtualization and other mainstream applications.
- Quad-core Intel® Xeon®
- Microsoft® Windows® Essential Business Server 2008
Microsoft® Windows Server® 2008 SP2, x86/x64 (x64 includes Hyper-V™)
Microsoft® Windows Server® 2008 R2, x64 (includes Hyper-V™ v2)*
Microsoft® Windows® HPC Server 2008
Novell® SUSE® Linux® Enterprise Server
Red Hat® Enterprise Linux®
Microsoft® Hyper-V™ via Microsoft® Windows Server® 2008
VMware® vSphere™ 4.1 (including VMware ESX® 4.1 or VMware ESXi™ 4.1)
For more information on the specific versions and additions, visit www.dell.com/OSsupport.
- NVIDIA MCP55
- 16 DIMM slots
1GB/2GB/4GB ECC DDR2 667/800MHz Options
Support up to 128GB* using 16 x 8GB DIMMs
Embedded Hypervisor (Optional)
- VMware Infrastructure 3, standard or enterprise; with VMware® vSphere™ 4.1 (including VMware ESX® 4.1 or VMware ESXi™ 4.1)
Citrix XenServer Dell Express & Enterprise Editions*
- Up to two Hot-Swappable Internal Drives:
2.5" SAS (10K rpm): 73GB* , 146GB*, 300GB*, 600GB*
2.5" SAS (15K rpm): 36GB*, 73GB* or 146GB*GB*
25GB* or 50GB* Solid State Drive (SSD)
Maximum Internal Storage
Up to 600GB*per blade via two 2.5" 300GB* hot-swappable SAS (10k rpm) hard drives
Disk Storage Options
Dell/EMC fibre channel and/or iSCSI external storage, including Dell/EMC CX300, CX3-10c , CX3-20, CX3-40, and CX3-80; CX4-120, CX4-240, CX4-480 and CX4-960
- Two 2.5” Hot-Swappable SAS/Solid State Drives
2.5" 500GB* SATA
I/O Mezzanine Card Options
- Fully populated mezz card slots and switch modules will yield 3 highly available, redundant I/O fabrics for each blade.
1Gb & 10Gb Ethernet: Dual-Port Broadcom Gb Ethernet w/ TOE (BCM-5709S)
Quad-Port Intel Gb Ethernet (82576)
Quad-Port Broadcom Gb Ethernet (BCM-5709S)
Dual-Port Broadcom 10Gb Ethernet (BCM-57711)
10Gb Enhanced Ethernet & Converged Network Adapters (CEE/DCB):
Dual-Port Qlogic® Converged Network Adapter (QME8142) - Supports CEE/DCB 10GbE + FCoE
Brocade® BR1741M-k Dual-Port Mezzanine CNA
Dual-Port QLogic FC8 Fibre Channel Host Bus Adapter (HBA) (QME2572)
Dual-Port Emulex FC8 Fibre Channel Host Bus Adapter (HBA) (LPe1205-M)
Emulex® 8 or 4 Gb/s Fibre Channel Pass-Through Module
Dual-Port Mellanox ConnectX Quad Data Rate (QDR) InfiniBand
Dual-Port Mellanox ConnectX Dual Data Rate (DDR) InfiniBand
- Four embedded Broadcom® NetXtreme II™ 5709 Gigabit Ethernet NICs with failover and load balancing TOE (TCPIP Offload Engine) supported on Microsoft® Windows® Server 2003, SP1 or higher with Scalable Networking Pack. iSCSI Offload supported on Microsoft® Windows® Server 2008, Microsoft Windows Server 2003 SP1 or higher, Red Hat® Linux® Enterprise 5, and SUSE LINUX Enterprise Server 10. Scalable Networking Pack for Microsoft Windows Server 2003 is not required.
Boot from SAN (iSCSI and FC) supported
Optional add-in NICs:
Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement)
See I/O Mezzanine Card Options
Intel® Gigabit ET Dual Port Server Adapter
Intel® Gigabit ET Quad Port Server Adapter
Optional add in HBAs:
See I/O Mezzanine Card Options
Fully populated mezz card slots and switch modules will yield 3 highly available, redundant I/O fabrics for each blade.
- Supplied by Dell’s M1000e Blade Chassis
- ATI RN50 (32MB Memory)
- The PowerEdge M805 blade server only fits in the M1000e blade enclosure. A total of 8 x M805/M905’s or 16 x M600/M605’s can fit into every M1000e enclosure. Full height and half height blades can be mixed in M1000e enclosures with no limitations.
M805 physical dimensions:
Height: 38.5cm (15.2 in)
Width: 5cm (2 in)
Depth: 48.6cm (19.2 in)
Weight (Maximum Configuration): 11.1kg (24.5lb)
Full height blade fits inside the M-1000e Blade Chassis
Maximum of 8 per blade chassis
- Dell OpenManage™ software tools:
IT Assistant-manage multiple Dell servers from a single console
OpenManage Server Administrator - 1:1 monitoring agents
Integration with 3rd party management solutions via Dell’s Certified Partner Program
Altiris Deployment Solution for Dell Blade Servers:
Designed to help reduce deployment time from hours to minutes
Integrated Dell Remote Access Controller (iDRAC) with:
Out of Band alerting, status, inventory, and troubleshooting via Secure Web GUI / CLI (telnet/SSH)
Remote Virtual Media (vMedia) and Virtual KVM (vKVM)
vMedia (virtual media) Map media from remote workstation/network to the blade
vKVM (virtual KVM) out of band remote console, supports Java or ActiveX plug-ins
IPMI 2.0 support
Environmental Operating Conditions
- Operating Temperature: 10º C to 35º C (50º F to 95º F)
Storage Temperature: -40º C to 65º C (-40º F to 149º F)
Operating Relative Humidity (non-condensing twmax=29C): 8% to 80% non-condensing
Maximum humidity gradient: 10% per hour, operational and non-operational conditions
Storage Relative Humidity: 5% to 95% non-condensing (twmax=38C)
Operating Vibration: 0.26Grms at 10Hz to 350Hz for 15 minutes
Storage Vibration: 1.54Grms Random Vibration at 10Hz to 250Hz for 15 minutes
Operating Shock: 1 shock pulse of 41G for up to 2ms
Storage Shock: 6 shock pulses of 71G for up to 2ms
Operating Altitude: -16 to 3,048m (-50 ft to 10,000 ft)
Storage Altitude: -16m to 10,600m (-50 ft to 35,000 ft)
Exceptional I/O CapabilityThe Dell™ PowerEdge™ M805 helps ensure high availability and redundancy by delivering full fabric redundancy (on all three fabrics) for exceptional I/O capacity.
Increased RAM CapacityMemory is a critically important component to virtualization and database performance. Expanding to a full-height form factor enabled Dell to greatly increase the total memory capacity of the M805 with 16 dual in-line memory module (DIMM) slots and up to 128 GB* of total RAM.
Enhanced Virtualization PerformanceThe Dell PowerEdge M805 blade server allows quick virtualization with software from leading industry vendors with an Secure Digital (SD) card for embedded hypervisors.
AMD Virtualization™ (AMD-V™) technology with Rapid Virtualization Indexing enables hardware-based virtual memory management to speed the performance of many virtualized workloads, and tagged TLB facilitates more efficient.
High-Performance ProcessorsIncorporating the latest business-class Six-Core AMD Opteron™ processors, the Dell PowerEdge M805 blade server delivers powerful performance in virtual and non-virtual environments.
Opteron processors enable:
- Globally recognized stability and longevity
- Exceptional performance
- Energy efficiency
- High levels of interoperability
- Essential security and manageability
Dell ProSupport — Faster, more reliable support services designed to address the technology challenges you face today. This new support portfolio is focused on your needs, time demands and budgets.
Need professional support services that take care of both you and your employees’ IT needs 7x24? Choose Dell ProSupport to get access to a certified technician in two minutes or less.
Got an IT staff? Choose Dell ProSupport for IT and get tech-to-tech support with Fast-Track Dispatch, along with 7x24 access to Dell-certified technicians.
|Dell ProSupport Service Model|
|Dell ProSupport||Dell ProSupport for IT|
Designed for organizations with limited or no dedicated IT staff.
Designed to provide tech-to-tech support for IT Professionals, Database Administrators and internal Service Desks or helpdesks.
Next, Dell ProSupport Options align to the way you use technology – rapidly responding to your needs, protecting your investment, your productivity and your sensitive data, and providing enhanced proactive support services to help reduce the risk and complexity of managing your infrastructure.
|SPEED OF RESPONSE||PROTECTION||PROACTIVE|
|Mission Critical — Perfect for server and storage environments where avoiding unplanned downtime and reducing recovery time through priority response are a must. The package includes priority 4-hour Onsite Service after Remote Diagnosis* or optional 2-hour response with 6-hour hardware repair, Dell’s proven Critical Situation process, and emergency dispatch.||Data Management and Protection ||Proactive Maintenance — Maximizes the availability and stability of your infrastructure proactively. The package includes a detailed system assessment and implementation of driver or firmware updates and upgrades for your server or storage systems. |
|Basic Hardware Support|
Ideal for non-essential application environments. This service offers business-hour, phone-based support* for hardware-only issues with Next Business Day On-Site Service* following completion of phone-based troubleshooting
|Customization and Set-Up|
Go from factory to deployment with Dell server installation services. Our modular suite of installation services allows you to customize the right package of services needed to rapidly implement your new system.
Get the skills you need to keep pace in today's competitive IT environment with comprehensive training and certification courses. Dell offers a vast array of instructor-led classes and online training courses in a range of topics from server maintenance to in-depth technical overview of specific systems.
Dell Management Plug-in for VMware vCenter
What if you could manage your physical infrastructure from your virtual console?
What if you could rapidly and consistently provision hardware and deploy virtual machines from within VMware vCenter?
What if you could reduce the number of steps needed to deploy virtual infrastructure?
With the Dell Management Plug-In for VMware vCenter installed in your VMware environment, you can:
• Get deep-level detail from Dell servers for inventory, monitoring and alerting— all from within vCenter
• Deploy BIOS and firmware updates to Dell servers from within vCenter
• Build hardware and hypervisor profiles and deploy any combination of the two on bare-metal Dell PowerEdge servers without a preboot execution environment (PXE)
• Automatically perform Dell-recommended vCenter actions based on Dell hardware alerts
• Access Dell hardware warranty information online
And, to give you even more power, we deliver our plug-in as a virtual appliance. That makes it easier to deploy and configure and offers integration directly into the vCenter console, providing more information inside of vCenter itself — unlike many other vendors who provide only "link-and-launch" capabilities to point to their own proprietary consoles.
The combination of the Dell Management Plug-In for VMware vCenter and the revolutionary embedded management features offered by Integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller in Dell PowerEdge servers gives you an unmatched level of integration between vCenter and your server hardware.