Dell™ PowerEdge™ M905 Blade Server
- Quad-core Intel® Xeon®
Microsoft® Windows® Essential Business Server 2008Virtualization Options:
Microsoft® Windows Server® 2008 SP2, x86/x64 (x64 includes Hyper-V™)
Microsoft® Windows Server® 2008 R2, x64 (includes Hyper-V™ v2)1
Microsoft® Windows® HPC Server 2008
Novell® SUSE® Linux® Enterprise Server
Red Hat® Enterprise Linux®
Microsoft® Hyper-V™ via Microsoft® Windows Server® 2008
VMware® vSphere™ 4.1 (including VMware ESX® 4.1 or VMware ESXi™ 4.1)
For more information on the specific versions and additions, visit www.dell.com/OSsupport
- NVIDIA® MCP55
- 24 DIMM slots
1GB/2GB/4GB ECC DDR2 667/800MHz Options
Support for up to 192GB* using 24x8GB DIMMs
Embedded Hypervisor (Optional)
- VMware Infrastructure 3, standard or enterprise; with VMware® vSphere™ 4.1 (including VMware ESX® 4.1 or VMware ESXi™ 4.1)
Citrix XenServer Dell Express & Enterprise Editions*
- Up to two Hot-Swappable Internal Drives:
2.5" SAS (10K rpm): 73GB*, 146GB*, 300GB*, 600GB*
2.5" SAS (15K rpm): 36GB*, 73GB* or 146GB*
25GB* or 50GB* Solid State Drive (SSD)
Maximum Internal Storage:
Up to 600GB* per blade via two 2.5" 300GB* hot-swappable SAS (10k rpm) hard drives
Dell/EqualLogic PS5000 Series
PowerVault NX1950 Unified Storage Solution
Dell/EMC fibre channel and/or iSCSI external storage, including Dell/EMC CX300, CX3-10c , CX3-20, CX3-40, and CX3-80; CX4-120, CX4-240, CX4-480 and CX4-960
- Two 2.5” Hot-Swappable SAS/Solid State Drives
2.5" 500GB SATA
- SAS6/IR (Raid 0/1) hardware based
CERC6/IR (Raid 0/1 w/ Cache)
PERC 6i Modular (RAID 0/1 w/ battery-backed cache)
PERC 6.2 Firmware
- Four embedded Broadcom® NetXtreme II™ 5709 Gigabit Ethernet NICs with failover and load balancing TOE (TCPIP Offload Engine) supported on Microsoft® Windows® Server 2003, SP1 or higher with Scalable Networking Pack. iSCSI Offload supported on Microsoft® Windows® Server 2008, Microsoft Windows Server 2003 SP1 or higher, Red Hat® Linux® Enterprise 5, and SUSE LINUX Enterprise Server 10. Scalable Networking Pack for Microsoft Windows Server 2003 is not required.
Boot from SAN (iSCSI and FC) supported
Optional add-in NICs:
Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement)
See I/O Mezzanine Card Options
Intel® Gigabit ET Dual Port Server Adapter
Intel® Gigabit ET Quad Port Server Adapter
Optional add in HBAs:
See I/O Mezzanine Card Options
Fully populated mezz card slots and switch modules will yield 3 highly available, redundant I/O fabrics for each blade.
- Supplied by Dell’s M1000e Blade Chassis
- ATI RN50 (32MB Memory)
- The PowerEdge M905 blade server only fits in the M1000e blade enclosure. A total of 8 x M805/M905’s or 16 x M600/M605’s can fit into every M1000e enclosure. Full height and half height blades can be mixed in M1000e enclosures with no limitations.
M905 physical dimensions:
Height: 38.5cm (15.2 in)
Width: 5cm (2 in)
Depth: 48.6cm (19.2 in)
Weight (Maximum Configuration): 11.1kg (24.5lb)
Full height blade fits inside the M-1000e Blade Chassis
Maximum of 8 per blade chassis
- Dell OpenManage™ software tools
IT Assistant-manage multiple Dell servers from a single console
OpenManage Server Administrator - 1:1 monitoring agents
Integration with 3rd party management solutions via Dell’s Certified Partner Program
Altiris Deployment Solution for Dell Blade Servers
Designed to help reduce deployment time from hours to minutes
Integrated Dell Remote Access Controller (iDRAC) with:
Out of Band alerting, status, inventory, and troubleshooting via Secure Web GUI / CLI (telnet/SSH)
Remote Virtual Media (vMedia) and Virtual KVM (vKVM)
vMedia (virtual media) Map media from remote workstation/network to the blade
vKVM (virtual KVM) out of band remote console, supports Java or ActiveX plug-ins
IPMI 2.0 support
Environmental Operating Conditions
- Operating Temperature: 10º C to 35º C (50º F to 95º F)
Storage Temperature: -40º C to 65º C (-40º F to 149º F)
Operating Relative Humidity (non-condensing twmax=29C): 8% to 80% non-condensing
Maximum humidity gradient: 10% per hour, operational and non-operational conditions
Storage Relative Humidity: 5% to 95% non-condensing (twmax=38C)
Operating Vibration: 0.26Grms at 10Hz to 350Hz for 15 minutes
Storage Vibration: 1.54Grms Random Vibration at 10Hz to 250Hz for 15 minutes
Operating Shock: 1 shock pulse of 41G for up to 2ms
Storage Shock: 6 shock pulses of 71G for up to 2ms
Operating Altitude: -16 to 3,048m (-50 ft to 10,000 ft)
Storage Altitude: -16m to 10,600m (-50 ft to 35,000 ft)
Exceptional I/O CapabilityThe Dell PowerEdge M905’s exceptional I/O capacity is enhanced by its ability to deliver highly available, fully redundant I/O to the system motherboard on all three fabrics. This is critically important in data centers where high availability and redundancy are a must.
Increased RAM CapacityMemory is one of the critical components for heavy virtualization and high-end database needs. Dell’s new full-height four-socket M905 Blade Server delivers 24 DIMM slots to provide truly impressive memory capacity, up to 192 GB.
High-Performance Data ManagementThe Dell PowerEdge M905 Blade Server is designed to increase the overall efficiency and performance of your data management infrastructure by delivering tremendous system resources in a blade form factor.
The Dell PowerEdge M905 features robust network and virtualization capabilities including highly available I/O bandwidth that is fully redundant to the mother board level. With enhanced memory capacity, the four-socket PowerEdge M905 Blade Server is built to address critical business and IT needs such as:
- Management of server resources
- Control of server sprawl
- Reduction of energy consumption and cooling costs inside your datacenter
Add the compact dimensions of the Dell M1000e enclosure and you have a potent server solution that’s compact, easy to deploy and easy to manage.
Optimized for Virtual EnvironmentsThe Dell PowerEdge M905 Blade Server is a performance powerhouse in virtual environments featuring:
- The newest generation of six-Core AMD Opteron™ Processors
- AMD Virtualization™ (AMD-V) technology that serves as the foundation for driving near-native application performance in virtualized environments
- An internal Secure Digital (SD) card for embedded hypervisors, designed to maximize virtualization performance
- High memory capacity and truly redundant throughput capacities
Only Dell M-Series provides complete, snap-in FlexIO scalability down to the switch interconnects. FlexIO technology is the foundation of the M1000e I/O subsystem and delivers the flexibility to design the solution to meet your requirements today, and the scalability to add or change options as warranted by your data center or future technologies in the future.
The M-Series enclosure supports a broad set of modular Ethernet blade switches including PowerConnect and Cisco Catalyst.
Dell's fully-modular PowerConnect switches provide great flexibility with choices in models from 1Gb to 10GbE speeds, flexible modular uplinks of varying media types, and many other valuable features. The PowerConnect portfolio, including the M6220 and M8024, offers a selection of switches for a variety of needs.
Spanning entry-level GbE to GbE with stacking and 10GbE uplinks – Cisco models include the Catalyst 3032, 3130G, and 3130X. The 3130 switches feature Cisco's Virtual Blade Switch functionality, enabling customers to interconnect up to 9 switches to create a single logical switch, thereby simplifying the manageability of their data center.
Learn More about Ethernet Blade Switches
Learn More about Ethernet Blade Mezzanine Cards
Brocade 4Gb and 8Gb Fibre Channel Switches provide powerful connectivity to fibre channel SANs, such as those offered by Dell/EMC. Models currently available include the M4424 and M5424.
For heterogeneous integration into any Fibre Channel network, these Brocade FC Switches can be configured as in Access Gateway mode. Based on NPIV functionality, Access Gateway mode delivers the cable aggregation benefits and cost savings offered by Dell’s M-Series blade solution.
Learn More about Fibre Channel Blade Switches
Learn More about Ethernet Blade Mezzanine Cards
For High-Performance Computing (HPC) or other environments requiring the highest bandwidth and lowest latency available, the M-Series offers two levels of InfiniBand switches. The industry’s first chassis-integrated Quad Data Rate IB switch is available in the Mellanox M3601Q, with speeds of up to 40Gbps. For Dual Data Rate (DDR) InfiniBand infrastructures, the M-Series can be equipped with Cisco M7000E or Mellanox M2401G switches. Each switch features 16 ports in and 8 ports out to ensure the availability and redundancy needed for the most demanding applications.
Learn More about InfiniBand Blade Switches
Learn More about InfiniBand Blade Mezzanine Cards
FlexIO for M-Series: Delivering the speed you need, when you need it
Learn More about M-Series Blade I/O Options
Dell offers storage technology that can enable you to derive maximum value from your information infrastructure.
No other company knows more about storing and protecting information on Dell servers and storage arrays than Dell. Direct feedback from customers drives the design and development of a broad range of storage products for organizations of all sizes.
|Storage Area Network (SAN): |
A network of shared storage resources
|Network Attached Storage (NAS): |
A storage server that connects to a network
|Disk Storage Arrays: |
Disk enclosures that connect to a server or network
|Tape Automation: |
Automated tape systems for consolidated backup
|Tape Drives and Removable Disk Drives: |
Tape and Removable Disk Drive devices used to back up and restore information