Fast solid-state storage
Take command of your most demanding enterprise applications with high-performance, low-latency, SSD-based Dell™ EqualLogic™ PS6110S 10GbE iSCSI arrays.
Enterprise power with everyday simplicity
Master your data-hungry tasks with EqualLogic™ PS6110S high-performance, low-latency 10GbE iSCSI arrays for highly consolidated enterprise environments.
Designed to scale with your business
Experience the low-latency advantage of solid-state storage with the PS6110S 10GbE iSCSI array. It’s a Dell Fluid Data™ solution with a virtualized scale-out architecture that delivers enhanced storage performance and reliability that is easy to manage.
Experience the low-latency advantage of solid-state storage with the PS6110S 10GbE iSCSI array. It’s a Dell Fluid Data™ solution with a virtualized scale-out architecture that delivers enhanced storage performance and reliability that is easy to manage.
- Leverage your existing infrastructure with 10GbE SFP+ or build out your network with new, cost-effective 10GBASE-T (both supported).
- Help eliminate downtime and performance penalties with smooth, incremental SAN expansion.
- Grow your virtual storage alongside your virtual server growth.
- Change hardware without disruption.
- Add or remove arrays at will, according to policy, age, application or business needs.
- Easily mix new disk or network technologies in the SAN.
- Move volumes (databases/VMs) online between any pool or disk resources.
- Avoid forklift upgrades or data-in-place migrations that cost time and money.
- Automatically balance loads across disks and multiple arrays in a pool.
- Help eliminate manual redistribution of capacity or application workloads (downtime and services costs).
Feature-rich architecture
Build new levels of performance for your enterprise storage needs using PS6110S arrays. With high-speed 200GB or 400GB solid-state drives (SSDs) and up to 9.6TB* of capacity, the PS6110S 10GbE iSCSI array offers the highest random-read IOPS performance and lowest latency in the EqualLogic PS6110 line. It features:
Build new levels of performance for your enterprise storage needs using PS6110S arrays. With high-speed 200GB or 400GB solid-state drives (SSDs) and up to 9.6TB* of capacity, the PS6110S 10GbE iSCSI array offers the highest random-read IOPS performance and lowest latency in the EqualLogic PS6110 line. It features:
- Dual 10GbE controllers and dual power supplies designed for built-in redundancy.
- Dedicated 10/100 management port per controller.
- 6G SAS backplane
- 24 high-speed, low-latency SSDs
- Cache-to-flash memory de-staging
- Peer-scaling architecture that scales performance linearly
- Vertical Port Sharing, designed to enable you to maintain full bandwidth if a networking port fails
- Group Manager, which integrates all management into one console for both file- and block-storage protocols
- EqualLogic Host Software that extends the functionality of the array-based software to enable cooperation with the host
- Host Integration Tools for Microsoft®, VMware® and Linux® products as well as EqualLogic SAN Headquarters (SANHQ) management software
Grow confidently with advanced Array Software features
Meet your current storage needs and future data management requirements with EqualLogic™ Array Software.- Synchronous Replication: Maintain two identical copies of a volume across two different storage pools in the same PS Series for real-time data protection.
- Volume Unmap: Recover unused space previously allocated to thin-provisioned volumes for better storage capacity utilization and cost-effectiveness.
- Snapshot Space Borrowing: Temporarily increase the available snapshot space for a volume by borrowing from the snapshot reserve of other volumes and pool free space improving your capacity management.
Product Configurations
- Storage Controllers
Dual controllers, each with 4GB memory for PS-series firmware. Each controller provides cache to flash for data protection.
Hard Disk Drives
Twenty-four (24) SSD hot-pluggable hard disk drives
Drive Capacities
2.5" SSD drives available in 200 GB* and 400 GB*
System Capacities
4.8 TB* using twenty-four (24) 200 GB* SSD drives
9.6 TB* using twenty-four (24) 400 GB* SSD drives
Technical Highlights
Volumes
Up to 1,024
Snapshots
512 per volume / up to 10,000 total per group
Volume Connections
Up to 1,024
Host Protocol
Any standards-compliant iSCSI initiator
Operating Systems Supported
Windows® 2000 Server, Windows Server® 2003, Windows Server® 2008, including Hyper-V™, Windows Vista®, Windows Server® 2008 R2 including Hyper-V™, Windows XP®, Red Hat® Enterprise Linux®, SUSE® Linux® Enterprise, Sun™ Solaris™, IBM® AIX®, HP-UX, Mac OS® X, VMware® ESX Server 3 / 3.5 / 4 / 4.1 / 5, ESXi 3.5 / 4 / 4.1 / 5, Citrix® XenServer™, Novell® NetWare®
RAID Support
RAID 5, RAID 6, RAID 10, and RAID 50
10GbE Network Interfaces
10GbE connectivity with one (1) 10GBASE-T with RJ45, one (1) 10GbE SFP+ for fiber or twin-ax copper cabling, and one (1) 100BASE-TX dedicated management port per controller
TCP Network Support
IPv4, IPv6 core support
Expansion Option
Can be combined with other EqualLogic PS Series arrays in the same SAN group, online. Up to 16 total members per group
Reliability
- Vertical port sharing
Redundant hot-swappable controllers, power supplies / cooling fans, and hot-swappable disks
Individual disk drive slot power control
Cache-to-flash
Enclosure Monitoring System
- Automatic spare configuration and utilization
SMART
Automatic bad block replacement
Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drive
Management
- SAN Headquarters multi-group performance and event monitoring tool
Serial console
Ability to configure a separate management network
SNMP, telnet, SSH, HTTP, Web (SSL), host scripting
Multi-administrator support
Security
- CHAP authentication
Access control for iSCSI
Access control for management interfaces including Active Directory, LDAP, or RADIUS support
Notification Methods
- SNMP traps, e-mail, syslog
Power
- AC voltage: 100-240 VAC ±10% single phase, 700 W (max, total), +5V up to 155W; +12V up to 624W; +5Vsb up to 10W
Frequency: 50/60 Hz
Power factor: 0.98 (minimum)
Power supplies: Dual 700 W
Chassis
- Height: 2U / 8.68 cm (3.41 inches)
Width: 44.63 cm (17.57 inches)
Depth: 54.1 cm (21.3 inches)
Weight: 25.4 kg (56 lbs)
Packaged physical: Length: 851 cm (33.50 inches) Width: 629 cm (24.75 inches) Depth: 395 cm (15.56 inches)
Packaged weight: 37.1973 Kg (82 lb)
Rack Support
Dell ReadyRails™ sliding rails for square-hole 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to snap into place with screws or other hardware
Dell VersaRails sliding rails for 4-post and 2-post racks 1U/2U Rail Attachment Brackets, designed to enable PS Arrays to be mounted in racks whose posts have round holes
Environmental Operating Conditions
- Temperature range: 5° to 40°C (41° to 104°F)
Storage temperature: –40° to 65°C (–40° to 149°F)
Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft.
Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation
of 10% per hour
Operational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations only
Operating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientations
Acoustics Category 4: <=7.2 bels at 23C +/- 2C
Air Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985
Dell delivers comprehensive end-to-end solutions to help you store and manage your data so you can efficiently move the right data to the right place at the right time for the right cost. EqualLogic™ array software and host software are part of these solutions and are included with your EqualLogic array purchase — providing all the tools your organization needs for a complete storage area network (SAN) solution.
Learn More
Learn More
 |  | EqualLogic Array Software Each EqualLogic array ships with a powerful set of features that help you manage, protect and optimize your data. The EqualLogic Group Manager helps streamline storage and data management while the EqualLogic Manual Transfer Utility helps minimize downtime when transferring large amounts of data. EqualLogic PS Series Firmware is the foundation of the EqualLogic software family. Integrated across the entire family of EqualLogic PS arrays, the EqualLogic Firmware is a SAN operating system based on a unique peer storage architecture that:
Learn More |
 | EqualLogic Host Integration Tools This family of host-based software provides tight integration between the EqualLogic array and the host. Dell provides host integration tools for Microsoft®, VMware® and Linux® environments, providing customers with the following benefits:
Learn More |
 | EqualLogic SAN Headquarters Dell EqualLogic SAN Headquarters (SAN HQ) is a centralized monitoring and reporting tool that gathers and provides in-depth information on performance, capacity and alerts across multiple groups of EqualLogic PS arrays, helping improve performance and effective allocation of group resources. Learn More |
| Support Services |
Dell Services
Dell believes that a well-planned and maintained storage infrastructure can support growing data requirements without the corresponding increase in cost and complexity. Intelligent data management allows organizations to optimize the value of their storage investment with a better use of resources. Dell™ Data Management Services can help customers design, implement, manage and maintain storage infrastructures that satisfy data availability, retention and recovery requirements.Dell ProSupport™ — Faster, more reliable support services designed to address the technology challenges you face today. This new support portfolio is focused on your needs, time demands and budgets.
Need professional support services that take care of both you and your employees’ IT needs 7x24? Choose Dell ProSupport* to get access to a certified technician in 2 minutes or less.
Got an IT staff? Choose Dell ProSupport for IT and get tech-to-tech support, along with 7x24 access to Dell-certified technicians.
Dell ProSupport Service Model | |
| Dell ProSupport | Dell ProSupport for IT |
Designed for organizations with limited or no dedicated IT staff. Includes:
| |
| Designed to provide tech-to-tech support for IT Professionals, Database Administrators and internal service desks or helpdesks. Includes:
| |
Next, Dell ProSupport Options align to the way you use technology — rapidly responding to your needs, protecting your investment, your productivity and your sensitive data, and providing enhanced proactive support services to reduce the risk and complexity of managing your infrastructure.
SPEED OF RESPONSE PROTECTION PREMIUM PROACTIVE Mission Critical — Perfect for server and storage environments where avoiding unplanned downtime and reducing recovery time through priority response are a must. The package includes priority 4-hour on-site service or optional 2-hour response with 6-hour hardware repair, Dell’s proven Critical Situation process, and emergency dispatch. Data Management and Protection Enterprise-Wide Contract — Provides enhanced proactive capabilities through:
Dell Server and Storage Deployment Services Customization and Setup
Dell provides a comprehensive set of remote and on-site installation services for PowerEdge™ and PowerEdge SC servers, as well as PowerVault™, Dell | EMC and Dell EqualLogic storage products to help reduce the time required to get your system up and running. These installation services help:
- Speed up deployment
- Supply necessary expertize for correct installation
- Minimize disruptions to your business
Comprehensive Training Training
Get the skills you need to keep pace in today's competitive IT environment with comprehensive training courses. Dell offers a vast array of instructor-led classes and online training courses in a range of topics from server maintenance to in-depth technical overview of specific systems.
Learn More