How to Adjust Color Registration on the C5765dn Dell Laser Printer

How to Adjust Color Registration on the C5765dn Dell Laser Printer


Table of Contents:

  1. How to Adjust Color Registration on the C5765dn Dell Laser Printer

This article provides information on "How to Adjust Color Registration on the C5765dn Dell Laser Printer"


1. How to Adjust Color Registration on the C5765dn Dell Laser Printer


Alignment issues can cause print quality issues as shown in this picture.


Resolving alignment print quality issues can be resolved by following the instructions in this article.

  1. Login to Admin Mode.
    1. Press the Login / Out Button on the operator panel.
    2. Enter "Admin" for the Admin’s login ID.
  2. Press the Tools Button.
  3. Under Features column, press the down arrow once.
  4. Press the Maintenance button.
  5. Press the down arrow twice.
  6. Select Side Color Registration.
  7. Print a registration page – this print is defaulted to A4 size but will print on letter.
    1. Load a sheet of paper in the MPF.
    2. Press Sample Print Out.

    Below is an example of an incorrect alignment.

  8. Select the color to modify and the amount to modify it by.
    1. You can set L/R values up +/-5 for all three colors before applying the change.

    Below is an example of what the alignment should look like after it is corrected. These steps may need to be repeated depending on the + and - of the alignment that was entered.


Back to Top




Artikel-id: SLN296382

Laatste wijzigingsdatum: 03/16/2015 02:08 PM


Beoordeel dit artikel

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
Ja Nee
Stuur ons feedback
Opmerkingen mogen geen speciale tekens bevatten: <>() \
Excuses, ons feedbacksysteem is momenteel offline. Probeert u het later nog eens.

Hartelijk dank voor uw feedback.