Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Número del artículo: 000139515


Interpreting LCD and Embedded Diagnostic (ePSA) event messages

Resumen: The server LCD presents an error message, or an error message is generated when running the Enhanced Pre-Boot System Assessment (ePSA)

Es posible que este artículo se traduzca automáticamente. Si tiene comentarios sobre su calidad, háganoslo saber mediante el formulario en la parte inferior de esta página.

Contenido del artículo


Síntomas

The server LCD presents an error message, or an error message is generated when running the Enhanced Pre-Boot System Assessment (ePSA).

Resolución

Refer to:  Dell Event Message Reference (Event and Error Message Reference Guide for 14th Generation Dell EMC PowerEdge Servers)

The Event Message Reference contains the error and event information generated by firmware and other agents that monitor system components.  These events might be logged, presented to the user on one of the system management consoles, or both logged and displayed.

Additional Information:

To run the Embedded System Diagnostics (also known as Enhanced Pre-Boot System Assessment).
  1. As the system boots, press <F11>.
  2. Use the up and down arrows keys to select System Utilities -> Launch Dell Diagnostics

Propiedades del artículo


Producto comprometido

Servers, PowerEdge

Fecha de la última publicación

21 feb 2021

Versión

3

Tipo de artículo

Solution