Interpreting LCD and Embedded Diagnostic (ePSA) event messages

Interpreting LCD and Embedded Diagnostic (ePSA) event messages


The server LCD presents an error message, or an error message is generated when running the Enhanced Pre-Boot System Assessment (ePSA).



Refer to: Dell Event Message Reference

The Event Message Reference contains the error and event information generated by firmware and other agents that monitor system components. These events might be logged, presented to the user on one of the system management consoles, or both logged and displayed.

Additional Information:

To run the Embedded System Diagnostics (also known as Enhanced Pre-Boot System Assessment).
  1. As the system boots, press <F11>.
  2. Use the up and down arrows keys to select System Utilities -> Launch Dell Diagnostics


ID del artículo: SLN288656

Última fecha de modificación: 04/04/2017 05:33 PM


Valorar este artículo

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
No
Envíenos sus comentarios
Los comentarios no pueden contener caracteres especiales: <>()\
Lo sentimos. El sistema de envío de comentarios no está operativo en estos momentos. Vuelva a intentarlo más tarde.

Gracias por sus comentarios