Precision R5400 Rack Mounted Workstation : A Visual Guide

Precision R5400 Rack Mounted Workstation : A Visual Guide

Table of Contents:

  1. Front View
  2. Rear View
  3. Front Bezel Removal
  4. System Cover Removal
NOTE: For a more detailed description about each location, please go to the system manuals at

This article provides a Visual Guide to your Precision R5400 Rack Mounted Workstation

1. Front View

The image below displays the Precision rack after the front bezel has been removed.

1 Power Button, Power LED 2 Drive Activity Light
3 Network Activity light (2) 4 Diagnostic Lights (1234)
5 USB 2.0 Connectors (2) 6 Optical CD/DVD Drive
7 Optical Drive eject button 8 Hard drive bays (2)

Back to Top

2. Rear View

1 Power Connector 2 PCI Expansion Card Slots, Full-height (5)
3 Back Panel Connectors (See below)

Back Panel Connectors

1 Network Link Integrity Light 2 Network Adapter Connector (Primary)
3 Network Activity Light 4 Line-out Connector
5 Line-in/Microphone Connector 6 Serial Port connectors (2)
7 PS/2 Keyboard Connector 8 PS/2 Mouse connector
9 USB 2.0 Connectors (3) 10 Network Activity Light
11 Network Adapter Connector (Secondary) 12 Network Link Integrity Light

Back to Top

3. Front Bezel Removal

1. Unlock the front bezel using the supplied key.

2. Press the tab at the left end of the bezel, then rotate the left end of the bezel away from the computer to release the right end of the bezel and pull the bezel away from the computer.

3. The removal is complete.

Back to Top

4. System Cover Removal

1. Establishing image.

2. To remove the computer cover, turn the latch release lock counterclockwise to the unlocked position.

3. Lift the latch on top of the computer. NOTE: The cover slides slightly toward the back of the computer when you lift the latch.

4. Grasp the cover on both sides and carefully lift the cover away from the chassis.

5. Complete.

Back to Top

Article ID: SLN295982

Last Date Modified: 08/06/2015 11:48 AM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.