iDRAC6 Web Interface Will Not Accept ": Colon Character in User Password

iDRAC6 Web Interface Will Not Accept ": Colon Character in User Password


Article Summary: This article provides information on the iDRAC6 web GUI will not accept a ":" (colon) character in user password.



Question

If a user attempts to create or change a user password in the iDRAC6 web GUI, a colon is not accepted. The iDRAC6 web page will flash, and the password does not take.

A colon is an acceptable ASCII character, and is allowed to be used in the user password.



Answer

Use the local or remote RACADM CLI utilityto set the password when using a colon.

For more information on the RACADM CLI utility, see the Systems Management WIKI page RACADM Command Line Interface for DRAC.


Note: A fix was included in iDRAC6 firmware 1.30.

For more information on updating the iDRAC firmware, see the Systems Management WIKI page Dell Remote Access Controller - DRAC / iDRAC .



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

文章 ID: SLN283382

上次修改日期: 08/28/2018 05:11 PM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
評語中不得包含下列特殊字元:<>()\
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您的寶貴意見。