OptiPlex FX170: Setting up DTOS Operating System

OptiPlex FX170: Setting up DTOS Operating System

Article Summary: Article describes an overview of Setting up the FX170 with DeTOS Operating System.

Table of Contents:
  1. Setting up the FX170 with DeTOS Operating System


Setting up the FX170 with DeTOS Operating System

NOTE: Dell does not support changing the embedded OS from what was factory installed.

NOTE: Hardware configurations cannot be changed in the field. If a different OS is needed, customer has to contact Dell and reorder a correct OS.

Setting up the FX170 with DeTOS Operating System

  1. Plug the power cord into the power adapter, plug the cord from the brick to the power connector on the terminal and plug the power cord into a known working outlet.

  2. Upon plugging in the power cord a green light should light up on the adapter itself.

  3. Connect your monitor's cable firmly to the thin client (Or DVI/VGA splitter if needed) and the monitor itself making sure all connections are securely fastened.

  4. Plug in your USB Keyboard & Mouse (Or PS/2 Keyboard & Mouse if using a PS/2 Splitter)

  5. Connect the Ethernet cable to the Ethernet port at the user's workspace and to the Ethernet port on the terminal itself.

  6. Press the power button on the terminal.

  7. As DETOS boots up for the first time you will select “Accept” on the end user's license agreement screen to continue.

  8. You will then boot to a blank DETOS desktop with a system tray and DETOS button.

  9. Select the Blue DETOS button in the lower left hand side of the screen and select the Control Panel Option.

  10. An IP address will be displayed at the bottom of the DETOS control Panel if received.

Click the button below to Tweet feedback or request assistance on anything in the above article. Twitter

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identificación del artículo: SLN286301

Última fecha de modificación: 12/19/2013 12:00 AM

Califique este artículo

Fácil de comprender
¿Este artículo fue útil?
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.