Baza wiedzy

How to Remove and Install the Fuser on the B5460dn / B5465dnf / S5830dn Dell Laser Printer


Table of Contents:

  1. How to Remove and Install the Fuser on the B5460dn / B5465dnf / S5830dn Dell Laser Printer

This article provides information on "How to Remove and Install the Fuser on the B5460dn / B5465dnf / S5830dn Dell Laser Printer"


1. How to Remove and Install the Fuser on the B5460dn / B5465dnf / S5830dn Dell Laser Printer

Caution: To prevent electric shock, always turn off the printer and disconnect the power cable from the grounded outlet before cleaning the printer or performing maintenance.
Note: It is recommended that only Dell Branded fusers are used in Dell Laser Printers as Dell cannot guarantee compatibility or the print quality of any 3rd party fusers.

Replace the Fuser on the Dell B5460dn and B5465dnf Laser Printers (1:46) - English Only.

WARNING: Turn off the printer, unplug the power cable and wait for 30 minutes.
  1. Switch the printer power off.

  2. Disconnect the power cable from the rear of the printer.

  3. Partially open the rear door. Pull the door to remove and set to the side.



  4. Push down on the levers to unlock and release the fuser door.



  5. The fuser is held in place by two screws with blue plastic heads. Turn counter-clockwise to release.

  6. Remove the old fuser by pulling the handle.

  7. Unpack the replacement fuser from the package.

  8. Insert replacement fuser into printer.

  9. Turn blue head screws clockwise to lock fuser into printer.

  10. Close the fuser down and lift the two levers to lock.

  11. Re-attach the rear door to the printer.

  12. Close the rear door.

  13. Connect the power cord to the printer and power on.

  14. Place used fuser in the packaging the replacement fuser was shipped and send to recycle.

For recycling information click on "Dell Recycling".

More info can be found in the B5460dn User’s Guide or the B5465dnf User’s Guide or the S5830dn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



Identyfikator artykułu: SLN291323

Data ostatniej modyfikacji: 01/10/2018 05:13 PM


Oceń ten artykuł

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
Tak Nie
Wyślij nam swoją opinię
Komentarze nie mogą zawierać znaków specjalnych: <>()\
Niestety, nasz system przekazywania opinii jest obecnie niedostępny. Spróbuj ponownie później.

Dziękujemy za uwagi.