Clean, Invert or Replace Feed Rollers on Dell 3330dn Laser Printers

Clean, Invert or Replace Feed Rollers on Dell 3330dn Laser Printers



Follow the steps below to Clean, Invert or Replace the Feed Rollers on Dell 3330dn Laser Printers.


Clean, Invert or Replace Feed Rollers Dell 3330dn

  1. Switch the printer off.
  2. Remove the paper tray.
  3. Turn the printer on to its side.

    Printer is shown turned on to its left side. A blue plastic tray is visible on the underside

  4. Open the blue plastic duplex tray to expose the pickup assembly. If the duplex tray is opened to 90° it will come loose from its mounting points. Only open the tray as far as is shown.

    The tray is pulled down revealing a T shaped arm with two wheels.

  5. Pass the pickup arm through the opening in the duplex tray.

    The arm is shown being passed through an opening in the blue plastic tray.

  6. Peel the rubber tyres off the pickup assembly wheels.

    A rubber tyre, similar to an elastic band is shown being peeled of the rim of the pickup wheel.

  7. Thoroughly clean and dry the tyres before refitting them to the pickup assembly.
  8. If paper feed issues persist after cleaning fit new or known good tyres if available. If no new or known good parts are available turn the tyres inside out to expose a fresh surface to the paper.

    A rubber tyre is shown turned inside out so that the raised treads are on the inside.


Printer support
More information can be found in the User Guide for your model printer, or visit our Printer Support site for additional information, troubleshooting articles and videos.

Purchase Toner and other Dell Laser Printer Supplies (select your country in the dropdown shown)

Dell Recycling

It is recommended that only Dell Branded toner, drums, transfer rollers or other consumables are used in our laser printers. Dell cannot guarantee compatibility or the print quality of any 3rd party consumables.




Код статьи: SLN290598

Дата последнего изменения: 09/25/2018 03:27 PM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.