How to Adjust Color Registration on the C5765dn Dell Laser Printer

How to Adjust Color Registration on the C5765dn Dell Laser Printer


Table of Contents:

  1. How to Adjust Color Registration on the C5765dn Dell Laser Printer

This article provides information on "How to Adjust Color Registration on the C5765dn Dell Laser Printer"


1. How to Adjust Color Registration on the C5765dn Dell Laser Printer


Alignment issues can cause print quality issues as shown in this picture.


Resolving alignment print quality issues can be resolved by following the instructions in this article.

  1. Login to Admin Mode.
    1. Press the Login / Out Button on the operator panel.
    2. Enter "Admin" for the Admin’s login ID.
  2. Press the Tools Button.
  3. Under Features column, press the down arrow once.
  4. Press the Maintenance button.
  5. Press the down arrow twice.
  6. Select Side Color Registration.
  7. Print a registration page – this print is defaulted to A4 size but will print on letter.
    1. Load a sheet of paper in the MPF.
    2. Press Sample Print Out.

    Below is an example of an incorrect alignment.

  8. Select the color to modify and the amount to modify it by.
    1. You can set L/R values up +/-5 for all three colors before applying the change.

    Below is an example of what the alignment should look like after it is corrected. These steps may need to be repeated depending on the + and - of the alignment that was entered.


Back to Top




Artikel-ID: SLN296382

Senast ändrad: 03/16/2015 02:08 PM


Betygsätt den här artikeln

Korrekt
Användbart
Lätt att förstå
Var den här artikeln till nytta?
Ja Nej
Skicka dina synpunkter
Kommentarer får inte innehålla följande specialtecken: <>()\
Vårt feedbacksystem är tyvärr ut funktion just nu. Försök igen senare.

Tack för dina synpunkter.