PERC - Dell PowerEdge™ 12G Servers With Numerous PERC H710 or H810 RAID Controllers May Take 30 Minutes to Boot Into UEFI

PERC - Dell PowerEdge™ 12G Servers With Numerous PERC H710 or H810 RAID Controllers May Take 30 Minutes to Boot Into UEFI


This article provides information on Dell PowerEdge 12G Servers With Numerous PERC H710 or H810 RAID Controllers May Take 30 Minutes to Boot Into UEFI.

Issue


PowerEdge 12G servers may take 30 minutes to boot into the UEFI interface.


Answer


PowerEdge 12G servers that have numerous PERC H710 and H810 controllers with very large quantities of hard disk drives attached may take an extended period of time to boot into the LifeCycle controller. In rare cases, it may take up to 30 minutes. There is no work around except to wait the approximate 30 minutes, at which time the system should enter the Life Cycle controller.



Need more help?
Find additional PowerEdge and PowerVault articles

Visit and ask for support in our Communities

Create an online support Request




Identifikátor článku: SLN266200

Dátum poslednej zmeny: 08/29/2016 10:05 AM


Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.