Databáza poznatkov

Bluetooth drivers failing to load using Dell CAB drivers while imaging Latitude Exx40 systems



This article contains information regarding "Bluetooth drivers failing to load using Dell CAB drivers while imaging Latitude Exx40 systems".


Bluetooth driver fails to install during imaging load from WIM file

After imaging a Latitude Exx40 system from a WIM file, you may notice that the Bluetooth device will fail to discover or that the Bluetooth device will show an error in device manager "wPCI Downstream Controller".


Run the full Bluetooth installer

This is working as designed and there is not hardware failure.

This issue is occurring because the Bluetooth driver being installed by the inf installer. For proper functionality, this device requires the full Bluetooth installation package to be installed for the wireless device in the system.

Download and run the Bluetooth installation utility for the effected system from the Dell Support Website.


Click the button below to Tweet feedback or request assistance on anything in the above article.




Identifikátor článku: SLN291560

Dátum poslednej zmeny: 09/12/2014 10:07 AM


Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.