024-360, MCU Down Load Error, 2155, firmware" />

024-360 MCU Down Load Error on the Dell 2155cn/cdn Laser Printer

024-360 MCU Down Load Error on the Dell 2155cn/cdn Laser Printer


Article Summary: This article provides Information on 024-360 MCU Down Load Error on the Dell 2155cn/cdn Laser Printer


Table of Contents:
  1. 024-360 MCU Down Load Error on the Dell 2155cn/cdn Laser Printer

1.

024-360 MCU Down Load Error on the Dell 2155cn/cdn Laser Printer

  1. Turn off the Printer and remove the communication cables (USB or Ethernet, depending on Set-Up)

  2. Power the Printer on and Print a System Settings Report

  3. If the error recurs download the latest Firmware from the Dell Support Site

  4. NOTE: Do Not turn off the Printer while the Firmware update is being applied as it may damage the controller card in the Printer, follow the on-screen instructions carefully.

  5. Print another System Settings Report and verify if error has recurred

  6. If the error has recurred, please contact Dell via the Twitter button, to advise of a technical fault

Back to Top

If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.




Article ID: SLN286302

Last Date Modified: 09/28/2016 09:02 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.