10GbE and FCoE Transit Switch for PowerEdge M1000e
Ease transition to 10GbE in your data center and expand the value of your blade investments with the Dell Networking M8024-k 10GbE and FCoE transit switch.
Chassis
- Single-wide I/O Module for M1000e blade enclosure
267 x 258 x 31mm (W x D x H)
10.5" x 10.2" x 1.2"
Approximate weight: 2.7kg, 5.8 lbs
Performance
- Switch Fabric Capacity 480 Gbps aggregate bandwidth (bi-directional)
Forwarding Rate 357 Mpps
Up to 16K MAC Addresses
512MB of CPU SDRAM
32MB of Flash Memory
Security
- IEEE 802.1x based edge authentication -- supports single and multiple host access, guest access, voice authorization, and Microsoft Active Directory
Switch access password protection
User-definable settings for enabling or disabling Web, SSH, Telnet, SSL management access
Port-based MAC Address alert and lock-down
IP Address filtering for management access via Telnet, HTTP, HTTPS/SSL, SSH and SNMP
RADIUS and TACACS+ remote authentication for switch management access
SSLv3 and SSHv2 encryption for switch management traffic
Management access filtering via Management Access Profiles
ACL Limits
Maximum Number of ACLs (any type) - 100
Maximum Number Configurable Rules per List - 1023
Maximum ACL Rules per Interface and Direction (IPv4/L2) - 1023 ing/ 511 egr
Maximum ACL Rules per Interface and Direction (IPv6) - 509 ing/ 255 egr
Maximum ACL Rules (system-wide) - 4096
Maximum ACL Logging Rules (system-wide) - 128
Routing
- Layer 3 Routing Protocols
Static routes
Routing Information Protocol (RIP) v1/v2
Open Shortest Path First (OSPF) v1/v2/v3
Classless Inter-Domain Routing (CIDR)
Internet Control Message Protocol (ICMP)
ICMP Router Discover Protocol (IRDP)
Virtual Redundant Routing Protocol (VRRP)
Address Resolution Protocol (ARP)
Internet Group Management Protocol (IGMP) v2
Distance-Vector Multicast Routing Protocol (DVMRP)
DHCP – Helper/Relay
Support IGMP v3
Layer 3 Routing Performance
Up to 128 RIP Routing Interfaces
Up to 128 OSPF Routing Interfaces; up to 128 OSPF Areas; up to 128 Routing Interfaces per OSPF
Area; up to 32 routes for ECMP Routing; up to 4 next hops per ECMP
Up to 128 VLAN Routing Interfaces
Up to 256 Multicast Forwarding Entries
Up to 8K ARP entries; Up to 4K NDP entries
Regulatory
- Regulatory Model: PCM8024-k
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home Page
Dell and the Environment
Management
- Default mode of operation is Simple Switch (port aggregator) mode to allow auto configuration of complex network settings
User configurable to full managed switch mode
Web-based management interface
Industry-standard CLI accessible via Telnet or Local Serial Port
SNMPv1, SNMP v2c and SNMPv3 supported
4 RMON groups supported (history, statistics, alarms and events)
TFTP transfers of firmware and configuration files
Dual Firmware images
Multiple Configuration file upload/download supported
Statistics for error monitoring and performance optimization including port summary tables
BootP/DHCP IP address management supported
Syslog remote logging capabilities
Temperature sensors for environmental monitoring
VLAN
- VLAN support for tagging and port-based as per IEEE 802.1Q
Double VLAN tagging (QinQ)
Up to 1024 VLANs supported
Dynamic VLAN with GVRP support
Quality of Service
- Layer 2 Trusted Mode (IEEE 802.1p tagging)
Layer 3 Trusted Mode (DSCP)
Layer 4 Trusted Mode (TCP/UDP)
Advanced Mode using Layer 2/3/4 flow-based Policies, including metering/rate limiting, marking and bandwidth guarantees; up to 100 ACLs can be used for QoS flow identification via Class-maps
8 Priority Queues per Port
Adjustable Weighted-Round-Robin (WRR) and Strict Queue Scheduling
Port-based QoS Services Mode
Flow-based QoS Services Mode
Priority Flow Control (PFC)
iSCSI Optimization based on Link Layer Discovery Protocol (LLDP)
Multicast
- Layer 2 Multicast
Static IP Multicast
Dynamic Multicast Support – 1024 Multicast groups supported in IGMP Snooping
IGMP snooping for IP multicast support
IGMP Querier
Protocol Independent Multicast (PIM-DM, PIM-SM)
Other Switching
- Link Aggregation with support for up to 12 static aggregated links, 8 dynamic aggregated links per switch and up to 8 member ports per aggregated link; LACP support (IEEE 802.3ad)
- RFC 1213 MIB II
RFC 1215 Standard Traps
RFC 1442 SMIv2 (SNMPv2 MIB)
RFC 1451 Manager-to-Manager MIB
RFC 1492 TACACS+
RFC 1493 Definitions of Managed Objects for Bridges
RFC 1573 Evolution of Interfaces
RFC 1643 Etherlike MIB
RFC 1757 Remote Network Monitoring (RMON) MIB
RFC 1907 SNMP v2 MIB
RFC 2011 Internet Protocol (IP) MIB using SMIv2
RFC 2012 Transmission Control Protocol (TCP) MIB using SMIv2
RFC 2013 User Datagram Protocol (UDP) MIB using SMIv2
RFC 2233 Interfaces Group using SMIv2
RFC 2618 RADIUS MIB
RFC 2665 Ethernet-like Interface Types MIB
RFC 2666 Identification of Ethernet Chip sets
RFC 2674 MIB for Bridge with Traffic Classes, Multicast Filtering and VLAN Extension (IEEE802.1p/q MIB)
RFC 2737 ENTITY-MIB
RFC 2819 RMON MIB
RFC 2863 Interface Evolution
Environmental Operating Conditions
- Operating Temperature: 0º C to 45º C
Storage Temperature: -20º C to 70º C
Operating Relative Humidity: 10% to 90% non-condensing
Storage Relative Humidity: 10% to 95% non-condensing

Improved 10Gb Ethernet connectivity for M-Series blades
Simplify 10GbE blade deployment and management with the Dell Networking M8024-k. Provide 10GbE connectivity for up to 16 M-Series blade servers equipped with the latest KR-based 10Gb network daughter cards (NDCs) or mezzanine cards.Not ready for 10GbE? Don't worry. The M8024-k also supports GbE connections, to both the server and the local area network (LAN), helping to ensure that you will be ready to quickly adopt 10GbE when the time comes. This kind of flexibility, along with the improved 10GbE bandwidth and performance, helps you meet the changing demands of data centers that embrace virtualization and other I/O (input/output)-intensive technologies.
The Dell Networking M8024-k is also an FCoE transit switch that can be attached to an external converged data center network to extend an available FCoE fabric. With the 4.2 firmware upgrade, the M8024-k uses FCoE Initialization Protocol (FIP) to perform functions of FC_BB_E device discovery, initialization and maintenance.
The FIP snooping feature enables the M8024-k to link Dell™ M-Series blades to an external top-of-rack or end-of-row FCoE forwarding switch and provides FCoE connectivity to the servers. This feature, along with Internet SCSI optimization, iSCSI TLV, and DCBx discovery and monitoring, enables seamless 10GbE performance in an end-to-end data center solution.
Connect with the benefits of virtualization
Meet the high-bandwidth demands of multi-core CPUs and server virtualization with up to 24 10GbE ports in the Dell Networking M8024-k. When combined with PowerEdge™ M710HD blades that feature 10Gb network daughter cards, the M8024-k provides end-to-end 10Gb Fabric A connectivity, leaving room for growth or additional technologies in Fabrics B and C.
Supporting connectivity to M-Series KR-based 10Gb network interface cards (NICs) and converged network adapters (CNAs), the M8024-k opens the door to cutting-edge networking features, such as NIC partitioning (NPAR), single-root I/O virtualization (SR-IOV) and iSCSI.
Flex and grow with FlexIO and scalable stacking
Build for the future with 16 internal 1/10GbE ports, four integrated external 1/10GbE enhanced small-form-factor pluggable (SFP+) ports and a FlexIO bay for easy growth as your business expands. With FlexIO, modular uplinks can be added or swapped as needed:
- 4-port SFP+ FlexIO Module
- 2-port 10GBASE-T FlexIO Module
- 3-port CX-4 FlexIO Module
Get started quickly with Simple Connect for LAN
Deploy and manage 10Gb-based blade configurations simply and with minimal network administration using the default Simple Switch mode of operation. The Simple Switch option features port aggregation and auto configuration when connecting to any external LAN.
Alternatively, when operating in full switch mode, enjoy a shortened learning curve and seamless integration of the M8024-k into existing Cisco® or any other LAN that uses industry-standard CLI (IS-CLI). These capabilities — combined with enterprise-class quality of service (QoS), security and management features — help to ensure that the M8024-k meets your in-chassis Ethernet switching needs today and in the future.
Both modes of operation pave the way for deploying and managing M-Series blades simply and efficiently using 10Gb Ethernet — the ideal solution for improving data center utilization, helping to save both time and money.
Alternatively, when operating in full switch mode, enjoy a shortened learning curve and seamless integration of the M8024-k into existing Cisco® or any other LAN that uses industry-standard CLI (IS-CLI). These capabilities — combined with enterprise-class quality of service (QoS), security and management features — help to ensure that the M8024-k meets your in-chassis Ethernet switching needs today and in the future.
Both modes of operation pave the way for deploying and managing M-Series blades simply and efficiently using 10Gb Ethernet — the ideal solution for improving data center utilization, helping to save both time and money.
Navigate network complexity with Dell EMC Services
Our global team of network experts understands the complexities of IT ecosystems, including multi-vendor environments. We have the skillset and experience to not only quickly resolve performance issues but also transform your network to meet the demands of your business.

Consulting
Dell EMC network consultants provide expert guidance to help you optimize and transform the network environment for the demands of today’s multi-cloud infrastructures. Our deep infrastructure and application expertise combined with sophisticated network analysis toolsets address a wide range of network technology and process challenges.

Deployment
Leverage the Dell EMC ProDeploy Enterprise Suite to get your network installed and configured. Our experts can free your IT staff to focus on your core business, minimize downtime and give you the confidence that the job will be done right, the first time.

Support
Gain access to ProSupport technical experts who can assist with your most complex networking challenges. The Dell EMC ProSupport Enterprise Suite provides networking support around the clock and around the globe, helping your team maintain a high level of productivity.

Education
Dell EMC offers flexible training programs so your staff can build the right skills to successfully manage and utilize your network to its full potential. Through our personalized approach, your staff gets the exact training they need to improve productivity and adoption, decrease downtime, and reduce end-user support calls.

