浏览
帮助
登录
未解决
此帖子已超过 5 年
evsny_zhang
3 消息
0
2682
2012年6月17日 22:00
控制器CPU指示灯蓝橙交替闪烁
回复(3)
进入com,检查信息如下:
service@spa spa:~> svc_diag --state=basic
======== Now executing basic state ========
* System Friendly Host Name is: (none)
* Current Software version: NeoBP1_SP1-2.0.3.13400-MAGNUM-RETAIL
* Unisphere IP address: Unable to determine Unisphere IP address in Service Mode
* SSH Status: SSH is disabled on this system.
* Boot Mode: Rescue_Mode
* Post Faults: No faults detected. (code 0x0000)
* Backend Faults: No faults detected. (code 0x0000)
* Boot Control Faults: A user has placed this Storage Processor into Service Mode (USER). (code 0x0905)
* Rescue Reason: A user has placed this Storage Processor into Service Mode (USER). (code 0x0905)
*** WARNING *** This Storage Processor is in Service Mode *** WARNING ***
*** Run "svc_diag --state=basic" to view more system state information ***
请问,如何把控制器退出服务模式?
yanzs
2 Intern
•
913 消息
1
那说明你的存储在不断重启,你可以通过串口线进去看看在启动过程中是不是报了什么错误,再根据提示做相应的操作
Anonymous
5 Practitioner
274.2K 消息
2012年6月18日 02:00
您可以尝试一下命令:
1)svc_rescue_state -c
2)svc_shutdown -r
系统重启后应该就会恢复到正常模式了
戴尔支持资源
查看更多
查看全部
Top
evsny_zhang
3 消息
0
2012年6月17日 22:00
进入com,检查信息如下:
service@spa spa:~> svc_diag --state=basic
======== Now executing basic state ========
* System Friendly Host Name is: (none)
* Current Software version: NeoBP1_SP1-2.0.3.13400-MAGNUM-RETAIL
* Unisphere IP address: Unable to determine Unisphere IP address in Service Mode
* SSH Status: SSH is disabled on this system.
* Boot Mode: Rescue_Mode
* Post Faults: No faults detected. (code 0x0000)
* Backend Faults: No faults detected. (code 0x0000)
* Boot Control Faults: A user has placed this Storage Processor into Service Mode (USER). (code 0x0905)
* Rescue Reason: A user has placed this Storage Processor into Service Mode (USER). (code 0x0905)
*** WARNING *** This Storage Processor is in Service Mode *** WARNING ***
*** Run "svc_diag --state=basic" to view more system state information ***
请问,如何把控制器退出服务模式?
yanzs
2 Intern
2 Intern
•
913 消息
1
2012年6月17日 22:00
那说明你的存储在不断重启,你可以通过串口线进去看看在启动过程中是不是报了什么错误,再根据提示做相应的操作
Anonymous
5 Practitioner
5 Practitioner
•
274.2K 消息
1
2012年6月18日 02:00
您可以尝试一下命令:
1)svc_rescue_state -c
2)svc_shutdown -r
系统重启后应该就会恢复到正常模式了