Highlighted
3 Cadmium

コマンドによるUnityの正常性確認

解決策を見る

コマンドでUnityの正常性を確認したいのですが、コマンドをご教示をお願い出来ないでしょうか。

0 件の賞賛
返信
1 件の受理された解決策

受理された解決策
Highlighted
モデレーター
モデレーター

Re: コマンドによるUnityの正常性確認

解決策を見る

todehi daneyoさん

コマンドで公開されているのは/sys/general healthcheck になります。

詳細の確認であれば/sys/general show -detail になります。

 

出力例>

service@UnityXT/user# uemcli /sys/general healthcheck

 

1:    Error code = Error: The health check has failed. A problem was detected on one or more of the remote systems, which will cause the upgrade to fail. Check the remote system connections and correct any issues.  If the problem persists, record the error code and search the Online Support website for available support options. [Error Code: platform::check_replication_health_2]

 

Operation completed successfully.

 

service@UnityXT/user# uemcli /sys/general show -detail

1:    System name             = UnityXT

      Model                   = Unity 480F

      Platform type           = EMC Storage System

      UUID base               = 0

      Product serial number   = APM001936xxxx

      Auto failback           = on

      Health state            = OK (5)

      Health details          = "The system is operating normally."

      Power (Present)         = 575 watts

      Power (Rolling Average) = 577 watts

      Supported SP upgrades   =

 

参考KB:Dell EMC Unity: How to perform health check

元の投稿で解決策を見る

0 件の賞賛
返信
1件の返信1
Highlighted
モデレーター
モデレーター

Re: コマンドによるUnityの正常性確認

解決策を見る

todehi daneyoさん

コマンドで公開されているのは/sys/general healthcheck になります。

詳細の確認であれば/sys/general show -detail になります。

 

出力例>

service@UnityXT/user# uemcli /sys/general healthcheck

 

1:    Error code = Error: The health check has failed. A problem was detected on one or more of the remote systems, which will cause the upgrade to fail. Check the remote system connections and correct any issues.  If the problem persists, record the error code and search the Online Support website for available support options. [Error Code: platform::check_replication_health_2]

 

Operation completed successfully.

 

service@UnityXT/user# uemcli /sys/general show -detail

1:    System name             = UnityXT

      Model                   = Unity 480F

      Platform type           = EMC Storage System

      UUID base               = 0

      Product serial number   = APM001936xxxx

      Auto failback           = on

      Health state            = OK (5)

      Health details          = "The system is operating normally."

      Power (Present)         = 575 watts

      Power (Rolling Average) = 577 watts

      Supported SP upgrades   =

 

参考KB:Dell EMC Unity: How to perform health check

元の投稿で解決策を見る

0 件の賞賛
返信