VNX Warning通知を止めたい

FTP疎通環境がないため、automatic transfer featureを無効にしております。

結果、weeklyのnas_checkupでwarningとして返され、トラップが通知されてきてしまっています。

該当の通知（nas_checkup実行時のwarning通知）のみを止めたいのですが、、、可能でしょうか。

sys_logより抜粋

Sep 18 03:51:28 2016:CS_PLATFORM:Checkup:WARNING:112:::::Scheduled nas_checkup has posted a warning. See /nas/log/checkup.160918-034802.log for more details.

/nas/sys/nas_eventlog.cfgより抜粋

# CS_PLATFORM:Checkup

#

facilitypolicy  6:142, 7

        disposition range=1-199, logfile "/nas/log/sys_log"

        disposition range=112-113, mail user　　　　　　<==★　　コメントアウト？

        disposition range=122-123, mail user

        disposition range=301-301 severity=6-6, callhome immediate

## need to check later

上記設定だとメール通知だけのように見えますが、SNMP通知もされるのでしょうか。

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Control Station: Check auto transfer status

Warning HC_CS_18800050418: The automatic transfer feature is disabled.

Action :

         EMC recommends the automatic transfer feature to be enabled via

         command:

         /nas/tools/automaticcollection -enable

         or from Unisphere:

         1. Select VNX -> System tab -> Click the link "Automatic Log Transfer

            for File" under "Service Tasks"

         2. Select Enable Automatic Transfer.

         3. Click Apply.

         By default, support materials will be transferred to ftp.emc.com,

         but you can modify the location in the

         /nas/site/automaticcollection.cfg file. For more information, search

         the Knowledgebase on Powerlink as follows:

         1. Log in to http://support.emc.com and go to Support > Knowledgebase

            Search> Support Solutions Search.

         2. Use ID emc221733 to search.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~