※上記ドキュメントより抜粋 The integrated Dell Remote Access Controller (iDRAC) delivers advanced, agent-free local, and remote administration. iDRAC is embedded in every F200 and F600 node and provides a secure means to automate specific node management tasks. The node management tasks include remote reboot or shutdown by using IPMI commands.
IDRAC does not require any additional software installation.
【参考】
以下記載の通り、F200で利用できるiDRACの機能は制限されている点にはご注意ください。 NOTE: Although iDRAC is preinstalled in F200 and F600 nodes, caution is recommended when using iDRAC. Some iDRAC features and functionality are accessible with the iDRAC interface, but are not supported. OneFS only supports the following IPMI commands with the iDRAC interface: ● Shutdown (power off) ● Reboot (power cycle) ● Startup (power on) ● Power Status (read-only)
Uehara Y.
Community Manager
Community Manager
•
5.1K メッセージ
0
2021年4月26日 22:00
uchiyさん
iDRACはPowerScale F200がPowerEdgeの筐体を利用しているので付属されるようになった機能です。
"iDRAC Enterprise"はiDRACのライセンスの種類なのですが、Solve Onlineで作成出来る「PowerScale F200: PowerScale Node Installation Guide」というドキュメントを確認したところ、iDRACの使用にあたって特に明示的に追加のアクションが必要となるものではありません。
※上記ドキュメントより抜粋
The integrated Dell Remote Access Controller (iDRAC) delivers advanced, agent-free local, and remote administration. iDRAC is embedded in every F200 and F600 node and provides a secure means to automate specific node management tasks. The node management tasks include remote reboot or shutdown by using IPMI commands.
IDRAC does not require any additional software installation.
【参考】
以下記載の通り、F200で利用できるiDRACの機能は制限されている点にはご注意ください。
NOTE: Although iDRAC is preinstalled in F200 and F600 nodes, caution is recommended when using iDRAC. Some iDRAC features and functionality are accessible with the iDRAC interface, but are not supported. OneFS only supports the following IPMI commands with the iDRAC interface:
● Shutdown (power off)
● Reboot (power cycle)
● Startup (power on)
● Power Status (read-only)