3 Cadmium

怎么开启交换机NPIV功能?

跳至解决方案

请问如何在SAN交换机上面开启npiv功能?

标签 (1)
0 项奖励
1 解答

已接受的解答
3 Cadmium

Re: 怎么开启交换机NPIV功能?

跳至解决方案

Brocade:

     DS_5100B:root> portcfgnpivport --enable [slot/]port ---开启指定端口的npiv功能

     DS_5100B:root> portcfgnpivport --disable [slot/]port ---关闭指定端口的npiv功能

     DS_5100B:root> portcfgshow ---查看端口npiv功能状态

         

     DS_5100B:root> portcfgshow 1

     Area Number:              1

     Speed Level:              AUTO(HW)

     Fill Word:                0(Idle-Idle)

     AL_PA Offset 13:          OFF

     Trunk Port                ON

     Long Distance             OFF

     VC Link Init              OFF

     Locked L_Port             OFF

     Locked G_Port             OFF

     Disabled E_Port           OFF

     Locked E_Port             OFF

     ISL R_RDY Mode            OFF

     RSCN Suppressed           OFF

     Persistent Disable        OFF

     LOS TOV enable            OFF

     NPIV capability           ON   ---npiv功能开启

     QOS E_Port                AE

     Port Auto Disable:        OFF

     Rate Limit                OFF

     EX Port                   OFF

     Mirror Port               OFF

     Credit Recovery           ON

     F_Port Buffers            OFF

     NPIV PP Limit:            126

     CSCTL mode:               OFF

   

Cisco:

     switch# config terminal

     switch(config)# npiv enable ---开启npiv功能

     switch(config)# no npiv enable ---关闭npiv功能

在原帖中查看解决方案

0 项奖励
1 回复
3 Cadmium

Re: 怎么开启交换机NPIV功能?

跳至解决方案

Brocade:

     DS_5100B:root> portcfgnpivport --enable [slot/]port ---开启指定端口的npiv功能

     DS_5100B:root> portcfgnpivport --disable [slot/]port ---关闭指定端口的npiv功能

     DS_5100B:root> portcfgshow ---查看端口npiv功能状态

         

     DS_5100B:root> portcfgshow 1

     Area Number:              1

     Speed Level:              AUTO(HW)

     Fill Word:                0(Idle-Idle)

     AL_PA Offset 13:          OFF

     Trunk Port                ON

     Long Distance             OFF

     VC Link Init              OFF

     Locked L_Port             OFF

     Locked G_Port             OFF

     Disabled E_Port           OFF

     Locked E_Port             OFF

     ISL R_RDY Mode            OFF

     RSCN Suppressed           OFF

     Persistent Disable        OFF

     LOS TOV enable            OFF

     NPIV capability           ON   ---npiv功能开启

     QOS E_Port                AE

     Port Auto Disable:        OFF

     Rate Limit                OFF

     EX Port                   OFF

     Mirror Port               OFF

     Credit Recovery           ON

     F_Port Buffers            OFF

     NPIV PP Limit:            126

     CSCTL mode:               OFF

   

Cisco:

     switch# config terminal

     switch(config)# npiv enable ---开启npiv功能

     switch(config)# no npiv enable ---关闭npiv功能

在原帖中查看解决方案

0 项奖励