开始新对话

此帖子已超过 5 年

Solved!

Go to Solution

3422

2014年7月24日 04:00

请教powerpath路径咋聚合呢?

请教powerpath路径咋聚合呢?同样的映射的规则在一个主机上就正常的在另外主机上就多了。

正常的因该是

LGDAME23-ok.jpg

但是到了另外一台主机,虽然映射的LUN不是同一个但规则是一样的确变成了一下的。

LGDAME24-unnormal.jpg

正常的应该是2424,在非常的主机上却变成了222222了。

咋改回来呢?

具体的log在附件中。

2个附件

109 消息

2014年7月25日 00:00

之前我给的答复错了,HP-UX还是不熟悉啊。

这个其实不是什么问题,Vbit也确实都启用了。造成两台主机上面powermt display 显示的条目数量不一样,是因为这些设备Map的时候,Vbus ID分配的不完全一样。

对于“正常”的那台主机,map lun的时候使用了两个vbus id,0和1

对于另外一台主机,map lun的时候总共用到了三个vbus id,0,1和2.

每增加一个Vbus ID,虽然还是同一个HBA卡,HP-UX会使用一个不同的controller编号,而PP是根据这个编号来聚合powermt display 的条目的。

要改的话,需要删设备,unmap设备,换一个Vbus ID再map一遍设备,再ioscan。还是算了吧。

3.2K 消息

2014年7月24日 19:00

自己UP一下

3.2K 消息

2014年7月24日 21:00

开了case 但是好像转给老外了,这该咋回答呢?

Hello,

From the emcgrabs outputs attached to the Service Request, this appears to be the current GateKeeper allocation on both servers:

LGDAME24

/dev/rdsk/c4t0d0 GK     EMC       SYMMETRIX    5773 5700022000 2880

/dev/rdsk/c8t0d0 GK     EMC       SYMMETRIX    5773 5700022000 2880

/dev/rdsk/c8t0d1   GK     EMC SYMMETRIX    5773 57001EF000       2880

/dev/rdsk/c8t0d2   GK     EMC SYMMETRIX    5773 57001F0000       2880

LGDCBCN1

/dev/rdsk/c4t0d0 GK     EMC       SYMMETRIX    5773 5700022000 2880

/dev/rdsk/c4t0d1   GK     EMC SYMMETRIX    5773 5700247000       2880

/dev/rdsk/c4t0d2   GK     EMC SYMMETRIX    5773 5700248000       2880

/dev/rdsk/c6t0d0 GK     EMC       SYMMETRIX    5773 5700022000 2880

/dev/rdsk/c6t0d1   GK     EMC SYMMETRIX    5773 5700207000       2880

/dev/rdsk/c6t0d2   GK     EMC SYMMETRIX    5773 5700208000       2880

Clearly device 022 is visible to both hosts and should not be.  Can you confirm this is the only problem or is there another issue that I'm not aware with?

Also, please confirm the following:

  1. 1. 

Which server should have visibility to GateKeeper device 0022?

  1. 2. 

Which server should NOT have visibility to GateKeeper device 0022?

  1. 3. 

Which is the original server?

  1. 4. 

Which is the 'cloned' server?

  1. 5. 

What method was used to clone the servers?

  1. 6. 

Is this causing an actual impact right now? e.g unable to run symcli commands on one or both of the servers?

  1. 7. 

Have you tried to unmask the GK device from the server where it should not be visible?

Regards,

1.6K 消息

2014年7月24日 22:00

打个电话进去,报下case号,要求中国工程师来处理吧。现在还是中国上班时间,应该是有人帮你的

Community Manager

 • 

6.2K 消息

2014年7月24日 22:00

刘兄,

你这个问题我也爱莫能助啊~~

但刚和Powerpath team的人沟通了一下。你现在打电话进去,他们应该是可以协调中文工程师来帮你处理的。

3.2K 消息

2014年7月25日 01:00

thank

3.2K 消息

2014年7月25日 01:00

thanks

3.2K 消息

2014年7月25日 01:00

thanks

找不到事件!

Top