具体mirror分配intend log的cli是什么啊？

没看懂。多码点字说明一下。

MirrorView有专门的CLI命令手册：

《MirrorView/Asynchronous Command Line Interface (CLI) Reference》

https://support.emc.com/docu10320_MirrorView/Asynchronous_Command_Line_Interface_(CLI)_Reference.pdf?language=en_US

《MirrorView/Synchronous Command Line Interface (CLI) Reference》

https://support.emc.com/docu10318_MirrorView/Synchronous_Command_Line_Interface_(CLI)_Reference.pdf?language=en_US

楼主在MirrorView/A这份手册里搜索write intent log相关操作就行。两份文档都需要Powerlink帐号才能下载。

另外再推荐几本常用的命令手册：

《Navisphere Command Line Interface (CLI) Reference》:

https://support.emc.com/docu10323_Navisphere_Command_Line_Interface_(CLI)_Reference.pdf?language=en_US

《SnapView Command Line Interfaces (CLI) Reference》:

https://support.emc.com/docu10317_SnapView_Command_Line_Interfaces_(CLI)_Reference.pdf?language=en_US

《Unisphere Analyzer Command Line Interface (CLI) Reference》:

https://support.emc.com/docu10326_Unisphere__Analyzer_Command_Line_Interface_(CLI)_Reference.pdf?language=en_US

《VNX for Block Command Line Interface (CLI) Reference》:

https://support.emc.com/docu31547_VNX_for_Block_Command_Line_Interface_(CLI)_Reference_1.0.pdf?language=en_US

write intent log配置的标准流程就是先创建两个128M的LUN, 要求是传统的LUN(Raid Group)里创建出来的, 再把这两个LUN配置成write intent log, 如果都用命令行做,把上面的几个命令结合起来就可以了. 没有单一命令直接创建并配置成write intent log.

Celia大侠挺久没看你出现了嘛，最近在忙啥呀？