3 Silver

HP-UNIX安装高端存储服务器操作

跳至解决方案

希望详细一些。

标签 (1)
0 项奖励
1 解答

已接受的解答
3 Zinc

Re: HP-UNIX安装高端存储服务器操作

跳至解决方案

这个是中端的,如果是高端的是差不多的在服务器端:

The steps (described later in this section) are:

1. Install the HBA.

2. Set the Unique Device Identifier (UDID) for the storage system.

3. Establish a preliminary single-initiator zone to one SP only.

4. Create Initiator records with the correct properties for the storage

system connection to the HBA(s).

5. Create a storage group on the array.

6. Prepare the LUN(s) for installing the operating system.

7. Use wwidmgr to identify the boot device that will contain Tru64

UNIX to the SRM console.

8. Boot from the CD-ROM and install Tru64 UNIX.

9. Apply any necessary patch kits and driver updates.

10. Update /etc/ddr.dbase with an entry for the VNX series and

CLARiiON storage system.

11. Shut down the server.

12. Complete zoning for this VNX series and CLARiiON system.

13. Create remaining Initiator records for the second SP.

14. Update the wwidmgr information to reflect the complete zoning.

15. Update bootdef_dev information and boot the server.

在原帖中查看解决方案

0 项奖励
4 回复数
5 Tungsten

Re: HP-UNIX安装高端存储服务器操作

跳至解决方案

support上就有

support.emc.com/docu5127_Host-Connectivity-Guide-for-HP-UX.pdf?language=en_US

前面自己加上https

0 项奖励
3 Zinc

Re: HP-UNIX安装高端存储服务器操作

跳至解决方案

这个是中端的,如果是高端的是差不多的在服务器端:

The steps (described later in this section) are:

1. Install the HBA.

2. Set the Unique Device Identifier (UDID) for the storage system.

3. Establish a preliminary single-initiator zone to one SP only.

4. Create Initiator records with the correct properties for the storage

system connection to the HBA(s).

5. Create a storage group on the array.

6. Prepare the LUN(s) for installing the operating system.

7. Use wwidmgr to identify the boot device that will contain Tru64

UNIX to the SRM console.

8. Boot from the CD-ROM and install Tru64 UNIX.

9. Apply any necessary patch kits and driver updates.

10. Update /etc/ddr.dbase with an entry for the VNX series and

CLARiiON storage system.

11. Shut down the server.

12. Complete zoning for this VNX series and CLARiiON system.

13. Create remaining Initiator records for the second SP.

14. Update the wwidmgr information to reflect the complete zoning.

15. Update bootdef_dev information and boot the server.

在原帖中查看解决方案

0 项奖励
4 Germanium

Re: HP-UNIX安装高端存储服务器操作

跳至解决方案

要HPUX链接到Symm,主要还是看liulei贴出来的那个链接指南,其中还有几点要注意的:

Host Connectivity Guide,链接:https://support.emc.com/docu5127_Host-Connectivity-Guide-for-HP-UX.pdf?language=en_US

  • P25 - Enginuity和HPUX的兼容性列表要对
  • P33 - Director Bit要配置好
  • P115 - HBA的配置按照上面的列出来的内容来配

至于你准备在Symmetrix里面做什么样的LUN给HPUX,要看Solutions Enabler的手册,链接是:https://support.emc.com/docu35249_Solutions_Enabler_Symmetrix_Array_Controls_CLI_7.3.1_Product_Guide...

  • P42开始Managing Device章节

楼主你浏览下上面两个文档,有问题再讨论。

5 Tungsten

Re: HP-UNIX安装高端存储服务器操作

跳至解决方案

还是楼上的大师强啊,如果您有配置SAN SWITCH还得考虑这个配置。

0 项奖励